در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: آنالیز دو عمقی,آنالیز تک عمقی,بار آبی,پتانسیل ماتریک,طول درشت مویینگی
- چکیده: در این پژوهش، دو روش صحرایی اندازهگیری هدایت هیدرولیکی اشباع با نفوذسنج گلف و نفوذسنج مکشی در مزرعهای با خاک لومی-شنی در دانشکدۀ کشاورزی مغان مقایسه شدند. آزمایشهای گلف با دستگاه نفوذ سنج گلف مدل k2800 اجرا شد. به این منظور، 15 چاهک با شعاع 5 سانتیمتر و عمق 25 سانتی متر درشبکه 2×2 متر حفر و دبی خروجی از دستگاه در بار آبی 5 و10 سانتیمتر اندازهگیری شد. آزمایش در قالب طرح کاملاً تصادفی با چهارتیمار و 15 تکرار دنبال شد. در روش نفوذسنج مکشی، آزمایشها در همان شبکه و در مکشهای 5 ،10 و 15 (سانتیمتر) اجرا شد. میانگین هدایت هیدرولیکی برای روش نفوذسنج مکشی، گلف با بار آبی 5، گلف با بار آبی 10 (سانتیمتر)، و آنالیز دوعمقی گلف بهترتیب برابر 7، 3، 4، و 6/2 (سانتیمتر بر ساعت) بهدست آمد. نتایج آزمون فیشر نشان داده است که روشهای مختلف در یک گروه قرار گرفتهاند و تفاوت معنیداری در سطح یک درصد با یکدیگر ندارند.میانگین مقادیر بهدست آمده برای عکس طول درشت مویینگی خاک برابر 0/07(بر سانتیمتر) است و با افزایش میزان هدایت هیدرولیکی اشباع خاک، روند افزایشی آن در خاک دیده شد.
- چکیده انگلیسی: In this study two methods of measuring saturated hydraulic conductivity namely: Guelph permeameter and Tension Disc Infiltrometer were compared in the experimental field of Moghan Faculty of Agriculture containing Sandy-loam soil texture . Guelph experiments were performed by using Guelph penetrometer model k2800. In this regard, 15 boreholes each with 5 cm diameter and 25 cm depth were drilled in a grid of 2×2 m and discharge was measured at the hydraulic heads of 5 and 10 cm. .. Experiments were performed based on completely randomized design with 4 treatments and 15 replicates. Also in the Tension Disc Infiltrometer, determination of saturated hydraulic conductivity was performed on the same grid with 5, 10, 15 cm suction heads. The average hydraulic conductivity obtained for Tension Disc Infiltrometer, Guelph permeameter in 5,10 cm of hydraulic heads and Guelph two depths analysis was found to be 7, 3, 4, 6.2 cm per hour, respectively. Results of Fisher test revealed that all methods are classified in a group and not significantly different from each other at the 0.01 level and beyond, . Average values for the inverse of macroscopic capillary length parameter was obtained to be 0.07 cm-1 and as the value of saturated soil hydraulic conductivity increased , an increase in the value of inverse macroscopic capillary length parameter was observed.
- انتشار مقاله: 17-06-1395
- نویسندگان: یاسر حسینی,یاسر حسینی,یاسر حسینی
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: مدلسازی,تحلیل حساسیت,ایستگاه پمپاژ,بهترین نقطۀ کارکرد
- چکیده: تغییرات نیاز آبی در دورۀ رشد گیاه، اختلاف ارتفاع در نقاط آبگیری، تطابق نداشتن ساعات آبیاری، تغییر الگوی کشت و عوامل محیطی دیگر باعث میشود تا عملکرد ایستگاههای پمپاژ متأثر از عوامل دینامیکی متعدد باشد. از اینرو، کارکرد ایستگاههای پمپاژ عموماً دینامیکی است یعنی وابسته به زمان است. در این تحقیق، با توجه به قابلیتهای سامانههای پمپاژ دورمتغیر در تطبیق با شرایط مختلف بهرهبرداری، رویکرد به استفاده از پمپهای دورمتغیر در یک کشت و صنعت 85 هکتاری زیتون واقع در استان قزوین بررسی شد. در این راستا، مدل دینامیکی سامانۀ مورد مطالعه با استفاده از نرمافزار MATLAB/SIMULINK ارائه شده است. نتایج حاصل از شبیهسازی 5 سناریوی بهرهبرداری حاکی از کاهش مصرف انرژی به میزان 18 درصد در حالت کنترل دورمتغیر، نسبت به حالت دورثابت است. آزمون تحلیل حساسیت مدل نشان میدهد که مهمترین عامل اثرگذار بر مصرف انرژی در سامانۀ آبیاری مورد مطالعه، میزان فشار خروجی در محل ایستگاه پمپاژ است.
- چکیده انگلیسی: Variable water requirement in growing season, altitude difference in hydrant points, incompatibility in irrigation hours, cropping pattern alternation as well as other environmental factors are conducive to dynamical factors to influence the operation of pumping stations. Thus, pumping stations have dynamic or time-dependent operation. In this study, we examined operation of variable speed pumps in an olive plantation of 85 ha in Ashrafiyeh agro-industry complex located in Qazvin province, considering various utilizing condition. In this regard, the dynamic model of the pumping station is developed and presented using MATLAB/SIMULINK software. The results inferred from five operation scenario's simulations represent 18 percent reduction in energy consumption of controlled pumping station with variable speed mode compared to constant speed mode operation. Moreover, the analysis of the results from hydraulic sensitivity index in variable speed pumps indicated that the highest amount of model sensitivity to pressure difference occurs during utilization time.
Key Words: Best Efficiency Point, Modeling, Pumping Station, Sensitivity Analysis- انتشار مقاله: 03-05-1395
- نویسندگان: افشین یوسف گمرکچی,عاطفه پرورش ریزی
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: عمق پایاب,عدد فرود ذره,سرریز کنگرهای,کاهش آبشستگی,جت ریزشی
- چکیده: سازههای کنترل تراز بستر را برای جلوگیری از افت بستر رودخانه و حفظ پایداری سواحل و جلوگیری از به خطر افتادن سازههای احداث شده در آن می سازند. یکی از موضوعات مهم در طراحی و ایمنسازی این سازهها، پیشبینی عمق آبشستگی در پاییندست آنها و روشهای کاهش آن است. در این تحقیق تأثیر پارامترهای هیدرولیکی بر مشخصات آبشستگی در پاییندست سازههای کنترل تراز بستر با پلان کنگرهای در آزمایشگاه بررسی شد. سرریزهای مورد مطالعه دارای هندسههای مختلف مستطیلی و ذوزنقهای بودند. آزمایشها برای شرایط مختلف دبی و عمق پایاب اجرا شد. مقایسۀ نتایج بهدست آمده نشان میدهد که با کاهش طول سیکل در جهت جریان سرریزهای کنگرهای- ذوزنقهای، عملکرد آنها در کاهش عمق آبشستگی بیشتر میشود به گونهای که کاهش عمق آبشستگی بهطور متوسط تا 19 درصد میرسد. در سرریزهای کنگرهای- مستطیلی، هرچه سیکلهای ورودی عریضتر باشد، عملکرد سرریز بهتر خواهد بود. کاهش عمق آبشستگی، در مقایسه با سازۀ کنترل تراز بستر خطی، بهطور متوسط تا 10 درصد میرسد. در این تحقیق همچنین رابطه جدیدی برای تخمین حداکثر عمق آبشستگی برای سازۀ کنترل تراز بستر کنگرهای ارائه شده است. نتایج آزمایشها نشان میدهد که رابطۀ ارائه شده نتایج مناسبی برای دادههای نمونۀ اصلی دارد و دقت آن نیز مناسب است.
- چکیده انگلیسی: Grade control structures are commonly used to prevent degradation, increase bank and bed of rivers stability and prevent cross structures failure in rivers. In order to design a safe grade control structures, estimation of local scour depth downstream of these structures is crucial. In this study effect of different parameters on local scour at the downstream of grade control structures with labyrinth planform was experimentally investigated. Different types of rectangular and trapezoidal labyrinth planform weirs were studied. Experimental results showed that labyrinth planform has a high effect on reducing scour depth. It was found that decreasing the length of cycles in trapezoidal weirs decreases the depth of scour while, decreasing the width of cycles in rectangular weirs increases the depth of scour. It was found that by increasing parameter and drop height, depth of scour increases, while increasing tailwater depth decreases the depth of scour and it varied from 2 to 8 percent for labyrinth weirs. Results showed that the scour depth follows an exponential law, dimensional equation for prediction of scour depth is presented. The accuracy of developed equation was examined with the available prototype data.
Keywords: Dencimetric Froude Number, Impinging Jet, Labyrinth Weir, Reduction of Scour Depth, Tail Water Depth.- انتشار مقاله: 21-03-1395
- نویسندگان: مهدی اسمعیلی ورکی,امیر رجائی,بهنام شفیعی ثابت
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: کانال مرکب,آبشستگی موضعی,تکیه گاه پل,پرۀ مستغرق
- چکیده: ادارۀ فدرال بزرگراههای آمریکا در بررسی آمار شکست پلها به این نتیجه رسیده است که دلیل اصلی شکست آنها آبشستگی موضعی اطراف تکیهگاههای جانبی، در مقایسه با آبشستگی پایههای پل، است.. روشهایی مختلف برای کاهش آبشستگی موضعیدر اطراف پایههاوتکیهگاههایجانبیپلپیشنهاد شده که یکی از آنها استفاده از پرههای مستغرق است. در پژوهش حاضر به بررسی عملکرد استقرار پرههای مستغرق در کاهش آبشستگی موضعی تکیهگاه پل با دماغۀ گرد بهصورت آزمایشگاهی پرداخته شده است. آزمایشها در یک فلوم با مقطع مرکب و با استفاده از رسوبات غیرچسبنده با قطر متوسط 1 میلیمتر و در دو مرحله اجرا شدند: بدون حضور پرههای مستغرق و با حضور پرههای مستغرق. پرهها با طول 10 و ارتفاع 33/3 سانتیمتر (3L/H=)، در پنج نوع آرایش دو ردیفه و با زاویۀ 20 درجه نسبت به جریان در جلو تکیهگاه پل مستقر شدند. نتایج این پژوهش نشان میدهد که عملکرد پرههای مستغرق در کاهش آبشستگی اطراف تکیهگاه قابل توجه و موجب حرکت حفرۀ آبشستگی و دور کردن آن از دماغۀ تکیهگاه به سمت مرکز کانال شده است. همچنین، استفاده از پرههای مستغرق با پنج نوع آرایش مختلف نشان میدهد که بهطور متوسط این سازه میتواند 1/60 درصد عمق آبشستگی را در اطراف تکیهگاه پل کاهش دهد. نتایج بهدست آمده همچنین نشان میدهد که بهترین عملکرد را آرایش دو ردیفه موازی دارد که در آن پرههای ردیف اول با فاصلۀ 5 سانتیمتر و ردیف دوم با فاصلۀ 15 سانتیمتر از تکیهگاه قرار میگیرند و موجب کاهش 74/71 درصد از حداکثر عمق آبشستگی شدهاند.
- چکیده انگلیسی: The statistics of bridge failures by US Federal Highway Administration show that the local scour around the bridge abutment is main reason compared to the local scour of piers. Various methods have been suggested for the control and reduction of local scour around the bridge piers and abutment. Using submerged vanes is one of these methods. In this study, the effect of submerged vanes to reduce the local scour around the bridge abutments with rounded nose was studied. Experiments conducted in a compound channel with non-cohesive sediments with diameter (d50) of 1 mm. Experiments carried out in two stages: in first stage without using submerged vanes and at the second stage with the presence of submerged vanes. Two rows of submerged vanes with length of 10 cm, height of 3.33 cm (L/H =3) and with angle of 20° was used. The results showed that the geometric properties of the scour hole in the nose of abutment was similar to the results obtained by other researchers. Results also showed that at all flow conditions submerged vanes reduced the scour hole around the bridge abutment and they moved the scour hole from the near of the abutment to the center of channel. Also the results showed that using submerged vanes averagely reduced 60.1% of the maximum scour depth. Finally the best layout of submerge vanes which had a distance of 5 and 15 cm between first and second rows with abutment, reduced the maximum scour depth by 71.74 percent.
Keywords: Abutment, Compound Channel, Local Scour, Submerged Vanes
- انتشار مقاله: 29-05-1395
- نویسندگان: صمد امامقلی زاده,ابراهیم نوحانی
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: بهینه سازی,سد خاکی,تکامل ترکیبی مجموعه ها,دسته ماهی های مصنوعی,نورد شبیه سازی شده
- چکیده: در این مطالعه، عملکرد روشهای بهینهسازی تکاملی برای طراحی مقطع سدهای خاکی ناهمگن بررسی شده است. این روشها عبارتاند از: الگوریتم دسته ماهیهای مصنوعی (AFSA)، الگوریتم تکامل ترکیبی مجموعه (SCE) و الگوریتم نورد شبیهسازی شده (SA). این مسأله بهصورت یک تابع بهینهسازی غیرخطی با اعمال قیود متفاوتی نظیر محدودیتهای پایداری شیب و ابعاد هندسی فرمولبندی شد. متغیرهای طراحی در فرآیند بهینهسازی، پارامترهای هندسی مقطع سد خاکی هستند و قیود ضرایب اطمینان پایداری از نتایج تحلیلهایی مانند تحلیل تراوش و پایداری شیروانیها برای مجموعهای از طرحهای نمونه و بهکمک مدلهای رگرسیونی خطی بهصورت توابعی صریح بر حسب متغیرهای طراحی تعیین گردید. کارایی روشهای بهینهسازی در تعیین نقطۀ بهینه سراسری، بر حسب میانگین عملکرد و متوسط زمان لازم برای محاسبات با یکدیگر مقایسه شد. پس از بهینهسازی ابعاد سد برزک با استفاده از روشهای SCE،AFSA وSA، حجم سد بهمیزان 38، 37 و 30 درصد نسبت به طرح اولیه کاهش یافته است. بر اساس نتایج بهدست آمده، در دستیابی به ابعاد بهینه مقطع سد خاکی روش SCEنسبت به روشهای SAو AFSAکارایی بهتری دارد.
- چکیده انگلیسی: In this study performance of evolutionary optimization methods for designing of cross section of heterogeneous earth dams is investigated. The methods applied were Artifical Fish Swarm (AFSA), Shuffled Complex Evolution (SCE) and Simulated Annealing (SA) algorithms. The model consisted of a nonlinear optimization function by applying different constraints such as slope stability constraints and geometrical dimensions. Design variables in optimization process were the geometrical parameters in cross section of earthen dam and stability safety factors constraints were determined as explicit functions according to design variables by using analyses results such as seepage and slopes stability analysis for a set of sample designs by using linear regression models. Efficiency of the optimization methods in identifying the global optimum point was compared according to mean performance and mean time required for calculations. After optimization of dimensions in Barzok dam by using SCE, AFSA and SA methods, dam volume was reduced 38, 37 and 30 percent respectively as compared to the primary design volume. Results showed that SCE method is more efficient than the SA and AFSA methods in achieving the optimal dimensions in cross section of earth dam.
Keywords: Artificial Fish Swarm, Earth Dam, Optimization, Shuffled Complex Evolution, Simulated Annealing- انتشار مقاله: 28-10-1394
- نویسندگان: حسام قدوسی,فهیمه وکیلی تنها
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: عدد فرود چگال,توسعة محدودة پیشروی جت,زاویة همگرایی,عدد وبر پیشرونده,منحنی پایین افتادگی
- چکیده: در این مقاله به بررسی آزمایشگاهی تخلیة زهاب چگال تحت جت سطحی منفرد و متلاطم در جریانهای پایدار پرداخته شده است. تأثیر پارامترهای هیدرولیکی شامل دبی تزریق و غلظت جت چگال و پارامترهای هندسی شامل قطر و زاویة همگرایی نازل تخلیهکنندة جریان بر پیشروی محدودة جریان جت بررسی شد. جت هیدرولیکی سطحی به قطرهای 5، 8 و 15 میلیمتر تحت زاویههای همگرایی مختلف نازل، در آزمایشگاه هیدرولیک آزمایش شد.خصوصیات مهم منحنیهای پایینافتادگی جریان جت که شامل حد انتهای پیشروی افقی جریان جت نسبت به محل خروج یا موقعیت نقطة شیرجه(Xp)، حداکثر طول مرز بالایی (Xmax) و حداکثر طول مرز پایینی (Xmin) است، بررسی گردید. نتایج بررسیها نشان میدهد که توسعة محدودة پیشروی جریان جت سطحی چگال در اعداد فرود فوقبحرانی صورت میپذیرد. همچنین، تحلیل دادهها نشان میدهد که بهطور میانگین با افزایش زاویة همگرایی نازل جت، از 15 به90درجه، Xpبه اندازة 41 درصد، Xmaxبه اندازة 40 درصد و Xmin در حدود 45 درصد افزایش مییابد. نتایج بهدست آمده از این تحقیق با استفاده از تحلیل آماری نشان میدهد که بین خصوصیات منحنی پایینافتادگی با عوامل توسعة جریان جت رابطة غیرخطی با دقّت قابل قبولی برقرار است.
- چکیده انگلیسی: In this research, the single and turbulent surface jet is evaluated for discharge of dense current by evaluating the effect of various parameters on circular surface buoyant jet flow. To achieve the purposes of this research, a physical model with 3.2 m length, 0.6 m width and 0.9 m height was applied. Then, the experiments were conducted by using the nozzles with diameters of 5, 8 and 15 mm at different contraction angles. The final limit of horizontal length of jet flux to inlet of effluent position (plunge point position), Xp, the maximum of upper limit length, Xmax, and the maximum of inferior limit length were considered as important properties of path trajectory. Findings showed development of surface jet flux occurred in supercritical Froude Number. Hence, the trajectory properties including Xp, Xmax and Xmin was increased by 41, 40 and 45 percent with increase of contraction angle 15 into 90 degrees, respectively. Result of statistical analysis showed a nonlinear relationship exists as a satisfactory correlation between trajectory properties and jet flux parameters.
Keywords: Contraction Angle, Densimetric Froude Number, Jet Flux, Progressive Weber Number, Trajectory
- انتشار مقاله: 05-07-1395
- نویسندگان: سمیرا سلمان زاده,جواد احدیان
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: ضریب تحکیم,اصلاح دانه بندی,دستگاه تحکیم هیدرولیکی,شاخص فشردگی
- چکیده: ارزیابی خصوصیات تحکیمی خاکهای رسدار با توجه به این موضوع که نشست خاک در برخی مواقع میتواند خسارتهایی جبران ناپذیری به بار آورد، یکی از گامهای مهم در طراحی و ساخت پروژههای عمرانی و به ویژه دراحداث سازههای آبی و ... است. رفتار تحکیمی خاکها معمولاً با استفاده از آزمایش ادئومتر در قالب تحکیم یک بعدی سنجیده میشود. اما در مورد خاکهای درشتدانۀ شنی رسدار بهعلت اندازۀ کوچک قالب باید دانهبندی اصلاح شود که منجر به تغییرات در نوع
دانهبندی خاک میشود. دستگاه تحکیم هیدرولیکی با رفع این محدودیت، امکان کنترل مسیرهای زهکشی و ثبت فشار منفذی نمونۀ خاک را نیز در حین عمل تحکیم فراهم میکند. هدف اصلی از تحقیق حاضر بررسی تغییرات در رفتار تحکیمی خاکهای شنی رسدار در اثر اصلاح دانهبندی است. در این خصوص، دانهبندی خاکهای شنی رسدار به روشهای جایگزینی و حذفی اصلاح و رفتار تحکیمی نمونههای اصلاح شده با استفاده از آزمایش ادئومتر سنجیده شد. علاوه بر این، نمونههای اصلی نیز با دستگاه تحکیم هیدرولیکی آزمایش شدند. نتایج بررسیها نشان میدهد که با اصلاح دانهبندی در نمونهها، ضریب فشردگی 5/1 تا 5/2 برابر افزایش و ضریب تحکیم 30 تا 80 درصد کاهش مییابد. تغییرات این مقادیر در خاکهای اصلاح شده به روش حذفی شدیدتر است تا به روش جایگزینی و بنابراین اصلاح دانهبندی به روش جایگزینی در بررسی رفتار تحکیمی خاکهای شنی رسدار مناسبتر است و مقادیر نزدیکتری به خاک اصلی دارد.- چکیده انگلیسی: The determination of consolidation properties of the clayey soils is one of the most important steps in designing and constructing the civil engineering projects; especially, irrigation and drainage projects. It is mainly important due to the fact that the settlement of these soils may cause a significant damage to the structures. Generally, the consolidation behavior of the soils is being evaluated by Oedometer in the form of one-dimensional consolidation. However, some modified gradation techniques should be employed in order to prepare samples of coarse grained clayey soils due to the smaller size of the test mold, which causes an alteration in the soil gradation. The hydraulic consolidation cell provides controlling drainage pathways and recording the pore pressure of the specimens during the test. The main objective of this study is to investigate the alterations made on coarse grained soils due to modified gradation. In this regard, the coarse grained clayey soils were grade modified by using scalped and replacement methods. Then, the consolidation behavior of the graded and modified specimens was tested by oedometer test. Moreover, the base soil specimens were tested by using hydraulic consolidation test. The results showed that by performing modified gradation techniques, the values of compression index and coefficient of consolidation, respectively, increases 1.5 to 2.5 time and decreases 30% to 80%. These alterations are more intense in grade modified specimens with sculpted method. Thus, the replacement method is a better approach for evaluating the consolidation behavior of coarse grained clayey soils, by providing closer values.
Keywords: Coefficient of Consolidation, Compression Index, Hydraulic Consolidation Cell, Modified Gradation- انتشار مقاله: 03-07-1395
- نویسندگان: سمیرا نعمت زاده,مسعود حاجی علیلوی بناب,حامد وفائی ملامحمود
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: آبشستگی موضعی,کنترل فرسایش,ارتفاع سرریزهای مستغرق,پیچ 90 درجه,جابه جایی قوس
- چکیده: سرریزهای مستغرق در پیچ آبراهه ابزارهایی مهم در اهداف چند منظوره از جمله کنترل فرسایش، احیای آبراههها و پروژههای مربوط به بهبود زیستگاهها هستند. این سازهها مجموعهای از موانع با ارتفاع کوتاه هستند که با زاویۀ بالادست (دافع جریان) برای کنترل و تغییر جهت جریان و سرعت در طول تمام قوس رودخانه یا آبراهه طراحی میشوند. هدف این تحقیق ارزیابی الگوی فرسایش و رسوبگذاری در یک قوس 90 درجه (با شعاع انحنای نسبی 3/3) با حضور سرریزهای مستغرق و بدون وجود سرریزهاست. برای رسیدن به هدف مطالعه، مجموعهای از سرریزها (7 سرریز) با ارتفاع 30، 50 و 70 درصد عمق جریان ورودی در قسمت ساحل خارجی قوس احداث و در شرایط مختلف هیدرولیکی بررسی شد. زاویۀ سرریزها 60 درجه و طول سرریزها 30 درصد عرض کانال در نظر گرفته شد؛ این شرایط در تمامی آزمایشها ثابت نگه داشته شد. نتایج تحقیق نشان میدهد که در نتیجۀ احداث سرریزهای مستغرق، خطالقعر به اندازۀ طول موثر سرریزها از سمت قوس خارجی به سمت مرکز کانال و در امتداد دماغه سرریزها انتقال مییابد. حجم آبشستگی در اثر احداث سرریزهای مستغرق با ارتفاع
50 و 70 درصد عمق آب بهترتیب 53 و 120 درصد بیشتر از حجم آبشستگی در حالت بدون سازه است در حالیکه مقدار آن در سرریزهای با ارتفاع 30 درصد عمق آب، برابر با حالت بدون سازه است. همچنین، ماکزیمم عمق نسبی آبشستگی در دماغه سرریزهای با ارتفاع 50 و 70 درصد عمق آب در حدود 2 برابر سرریزهای با ارتفاع 30 درصد است.- چکیده انگلیسی: An important tool in current multi-purpose erosion control, stream restoration, and habitat improvement projects is the bendway weir. A series of upstream-angled low-elevation stone sills (bendway weirs) are designed to control and redirect currents and velocities throughout a bend of a river or stream. Consideration of scour and sedimentation pattern at a 90 degree bend (with relative radius of curvature equal to 3.3) in the presence of weirs and without weirs is the aim of this study. To reach the purpose of this study, series of bendway weirs (7 weirs) with height of 30, 50 and 70 percent of flow depth were constructed in multiple flow conditions at the outer bank side. The inclination angle, length and distance of weirs were kept fixed in all tests, and set equal to 60 degree, 30 percent of canal width and three times of weir length, respectively. The results showed that the channel talweg moved as effective length of weir from outer bank to the center and along the weirs tips at the result of bendway weirs installation. Owing to installation of bendway weirs with 0.5D and 0.7D height the scour volume accessed 53% and 120% higher than no-weir state, respectively. While for weirs with 0.3D height, it was equal to no-weir condition. Also, the maximum relative scour depth at the tip of weirs with height of 0.5D and 0.7D were two times of weirs with 0.3D height.
Key words: Bend Migration, Erosion Control, Height of Bendway Weirs, Local Scour,
90 DegreeBend
- انتشار مقاله: 01-04-1395
- نویسندگان: پژمان دارابی,محمد همتی,نورعلی حقدوست
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: بهره برداری,نوسان های ورودی,دریچۀ نیرپیک,شبکۀ آبیاری رودشت,کانال اصلی
- چکیده: بهبود مدیریت بهرهبرداری کانال اصلی شبکههای آبیاری بهمنظورتوزیع عادلانۀ آب کشاورزی در کانالهای درجه دو
ضروری است. در این تحقیق، به راهکارهای صرفاً غیرسازهای بهمنظور بهبود وضعیت کنونی بهرهبرداری کانال اصلی آبیاری پرداخته شده است که با مشکل نوسانهای جریان ورودی روبهروست. در اینباره و بر اساس قابلیت عملیاتی شدن در
بهرهبرداری کانال اصلی، چهار راهکار بهترتیب با تاکید بر شرایط قابل پیشبینی نوسانهای ورودی، شرایط غیر قابل
پیشبینی، امکان نوبتبندی تحویل آب به بالادست و پاییندست کانال اصلی و کاهش مدت زمان آبگیری با افزایش ناگهانی دبی ورودی در سراب کانال پیشنهاد شده است. میزان تأثیر هر یک از راهکارهای غیرسازهای گفته شده در بهرهبرداری کانال اصلی، با بهرهگیری از مدل ریاضی تهیه شده در کانال اصلی شبکۀ آبیاری رودشت در شبیهساز هیدرودینامیک ICSS، با استفاده از شاخصهای ارزیابی عملکرد بررسی شد. نتایج بررسیها حاکی از بهبود مؤثرتر بهرهبرداری کانال اصلی با استفاده از راهکارهای سوم و چهارم است بهطوریکه با اجرای آنها، حداکثر خطا در دبی تحویلی، کفایت تحویل و عدالت توزیع بین آببران پاییندست کانال اصلی و بالادستیها، بهطور متوسط برای تمام آبگیرهای واقع شده در کانال بهترتیب
بهمیزان 25، 18 و 17 درصد بهبود یافته است.- چکیده انگلیسی:
Improving management of existing irrigation canals is indispensable in order to save more water. In this study, a set of four nonstructural solutions introduced in order to improve the operational performance of a main irrigation canals suffering from fluctuations of inflow water. To this end the existing operation of the Roodasht main irrigation canal was simulated applying a mathematical model and assessed by the operational performance evolution indices. Then the abovementioned solutions were investigated. The four solutions consist of operation with known disturbances; unknown disturbances; rotational water delivery out of the intakes alongside of the main canal and increasing discharge inflow. The results indicated that operational level were improved by the solutions, for example by employing the third and the forth operational solution, average value of the maximum error in water delivery was decreased by 25% and adequacy of water delivery activity was improved by18% respectively. Also, the results showed that under severe decrease of inflow to the canal, the mentioned solutions improved water delivery and distribution between upstream and downstream 17 percent.
Key Words: Inflow Fluctuations, Main Canal, Nyrpic Modules, Operation, Roodasht Irrigation Canal
- انتشار مقاله: 24-02-1395
- نویسندگان: سید مهدی هاشمی,سونیا صادقی,اسماعیل ادیب مجد
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: آب مصرفی کشاورزی,توازن آبی در کشور,سیکل هیدرولوژی,مصارف آب
- چکیده: حدود دو سوم آب رودخانهها، دریاچهها و آبخوانهای زیرزمینی جهان در بخش کشاورزی به مصرف میرسد. در ایران نیز مانند سایر کشورها، بخش قابلتوجهی از منابع آبهای سطحی و زیرزمینی در این بخش استفاده میشود. مبنای اساسی برآورد حجم آب مصرفی در بخش کشاورزی تحلیل مؤلفههای بیلان آب در سطح کشور است. متغیر بودن میزان بارش سالانه منشأ مؤلفههای بیلان آب در چرخة هیدرولوژی و بهتبع آن، متغیر بودن حجم آب مصرفی در بخش کشاورزی، مهمترین دلیلی است که برآورد مجدد مصرف آب در بخش کشاورزی را ضروری میسازد. بنابراین، در این پژوهش حجم آب مصرفی در بخش کشاورزی با رویکرد تفکیک مؤلفههای بیلان آب در چرخة هیدرولوژی بر مبنای دادههای بلندمدت پنجاهساله و کوتاهمدت هفتساله بارش در سطح کشور برآورد و تحلیل شده است. میانگین بارش پنجاهساله و هفتساله
بهترتیب برابر 53±249 و 33±206 میلیمتر و میانگین حجم آب مصرفی تعدیل نشده در بخش کشاورزی (بدون احتساب تلفات) برای دو دورة یاد شده بهترتیب برابر 18±67 و 6±83 میلیارد مترمکعب بهدست آمده است. میانگین آب مصرفی تعدیل شده (با احتساب تلفات) در این بخش در دورة هفتساله برابر 6±75 میلیارد مترمکعب معادل حدود 71 درصد آب تجدیدپذیر است. تحلیلها نشان میدهدکه بر مبنای برازش دادههای بلندمدت، حجم آب مصرفی در بخش کشاورزی در مقایسه با حجم آب تجدیدپذیر برابر 50 درصد است. بهروز کردن برآورد حجم آب مصرفی در بخش کشاورزی در کشور و تحلیل تغییرات زمانی آن، برجستگی اساسی این پژوهش است. با اینهمه، استفاده از روش بیلان آب برای برآورد مصرف آب در بخش کشاورزی محدودیتها و سادهسازیهای متعددی دارد و برای اطمینان بخشی به نتایج برآوردها، لازم است آزمایشهای میدانی مناسبی صورت گیرد.- چکیده انگلیسی: About two-thirds of rivers, lakes and groundwater are applied for agricultural production in the world. Same as other countries, a significant fraction of surface and groundwater resources are used in agricultural sector in Iran. Water balance at country scale is the origin of estimation of applied water as agricultural consumption. The variability of annual precipitation is as the origin of the components of water balance in hydrological cycle, caused changeability in the water consumption of agricultural sector which are important reasons for estimating and re-estimating consumptive water in agricultural sector. Therefore, in this study, consumptive water of agricultural sector was analyzed based on long term (50 years) and short term (current 7 years) measured data for precipitation with the method of water balance in hydrological cycle in the country. Results revealed that average annual precipitation were 249±53 and 206±33 mm for two long and short studied periods, and the consumption water in agricultural sector were 67 ±18 and 83±6 km3 for long (50 years) and short (7 years) periods for non-modified conditions. The modified consumption water for the short period was 75±6 MCM.Results revealed that for the long period, the water consumption in agricultural sector was 0.50 of renewable water in the country. The outstanding of this study was up to date estimating of the water consumption in agricultural sector and its analysis. But applying water balance method for this purpose has some substantial limitations and non-reliable simplifications. Therefore suitable experiments are needed to reliably the results.
Key Words: Agricultural Water Consumption, Hydrological Cycle, Water Balance in the Country, Water Consumption.- انتشار مقاله: 07-12-1394
- نویسندگان: ابوالفضل ناصری,فریبرز عباسی,مهدی اکبری
- مشاهده