در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: مایع یونی,ولتامتری,حسگر الکتروشیمیایی,بنزرآزید,نانوذره فریت کبالت
- چکیده: یک حسگر الکتروشیمیاییی اصلاح شده براساس الکترود خمیرکربن اصلاح شده با نانوذرات فریت کبالت و مایع یونی 1-بوتیل-3-متیل ایمیدازولینیم تترا فلورو بورات برای آنالیز بنزرآزید طراحی شده است. در مرحله اول، نانوذرات فریت کبالت با استفاده از روش همرسوبی سنتز شده و با استفاده از آنالیز میکروسکوپ الکترونی عبوری مورد برسی قرار گرفتند. در ادامه و در شرایط بهینه، سنسور طراحی شده برای آنالیز بنزرآزید در گستره خطی بین 1/0 تا0/350 میکرومولار با حدتشخیص 05/0 میکرومولار بکارگرفته شد. ضریب نفوذ بنزرآزید در سطح الکترود اصلاح شده با استفاده از تکنیک کرونوآمپرومتری تعیین شد. سنسور پیشنهادی گزینش پذیری مناسبی را برای آنالیز بنزرآزید در حضور مزاحمت های معمول نشان میدهد. در نهایت الکترود اصلاح شده برای آنالیز بنزرآزید در نمونه های دارویی و بیولوژیک استفاده شد و نتایج توانمندی بالای سنسور پیشنهادی برای آنالیز بنزرآزید در نمونه های حقیقی را نشان می دهد.
- چکیده انگلیسی: A modified electrochemical sensor based on carbon paste electrode modified with CoFe2O4 nanoparticle and 1-Butyl-3-methylimidazolium tetrafluoroborate was fabricated for benserazide determination. In the first step, CoFe2O4 nanoparticle were synthesized by co-precipitation method and characterized by TEM method. In continuous and at optimum condition, the prepared sensor showed dynamic range between 0.1-350.0 μM with detection limit 0.05μM for determination of benserazide. The diffusion coefficient was determined by chronoamperometric method. The proposed sensor showed good selectivity for determination of benserazide in the presence of usual interferences. Finally, the modified sensor was used for determination of benserazide in pharmaceutical and biological samples and showed the high ability for analysis of this drug in real samples.
- انتشار مقاله: 19-11-1396
- نویسندگان: حامد قائدی,فاطمه کریمی,حسن کریمی مله
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: 1-آریل-1H-تترازول,زیرکونیوماکسیکلراید,تئوری تابعیت دانسیته,پتانسیل الکترواستاتیک
- چکیده: روشی ساده، کارآمد و تطبیق پذیر برای سنتز 1-آریل-1H-تترازول ها با استفاده از واکنش مابین تری اتیل اورتو فورمات، آمینهای آروماتیک و سدیم آزید در حضور زیرکونیوم اکسی کلراید به عنوان کاتالیزور ارائه شده است. واکنش در حلال استیک اسید و دمای پایین به خوبی انجام گرفته و منجر به تولید محصولات مورد نظر با بازده عالی میشود. در ادامه محاسبات شیمی کوانتومی با استفاده از تئوری تابعیت چگالی روی محصولات سنتز شده انجام گرفت. روش و مجموعه پایه B3LYP/6-31g(d) برای این منظور به کار گرفته شد. ساختار هندسی ، پارامترهای ترمودینامیکی، اوربیتالهای مولکولی مقدم (هومو و لومو) و پتانسیل الکترواستاتیک محصولات مورد بررسی و تجزیه و تحلیل قرار گرفت. نتایج نشان دادند که هردوی جایگاههای مربوط به بیشترین و کمترین پتانسیل الکترواستاتیک روی حلقه تترازول قرار دارند بنابراین در برابر هردوی واکنشهای هسته دوستی و الکترون دوستی حلقه تترازول بر حلقه فنیل برتری خواهد داشت.
- چکیده انگلیسی: A simple, efficient and versatile procedure for the synthesis of the 1-Aryl-1H-tetrazols using reaction between triethyl orthoformate, sodium azid and aryl amines in the presence of the ZrOCl2.8H2O as catalyst is introduced. The reaction is carried out at acetic acid as solvent under low temperature and gets pure products in high yields. In continue the quantum chemical computations were done on products using density functional theory. The M062X/6-31G(d) used as the method and basis set for all calculations. Geometrical structures, thermodynamical properties, frontier molecular orbitals (HOMO and LUMO) and electrostatic potential maps of the products were obtained and analyzed. The results showed that the both of the maximum and minimum electrostatic potential regions are located on the tetrazol ring therefore for both of the nucleophilic and electrophilic reactions the tetrazol ring will be prior to the phenyl one.
- انتشار مقاله: 11-09-1397
- نویسندگان: بهزاد خلیلی,نصرت اله محمودی,حمید افرند
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: نانوکاتالیزور,فنتون,فرآیندهای اکسیداسیون پیشرفته,نانو ذرات مغناطیسی
- چکیده: در این پژوهش نانوذرات مگنتیک (Fe3O4 NPs) و نانوذرات مگنتیک بر روی پایه کربن فعال عامل دار شده (Fe3O4/AC NPs) به روش هم رسوبی تحت گاز نیتروژن سنتز شدند. این نانوکاتالیزورها با استفاده از تکنیک های میکروسکوپ الکترونی روبشی (SEM)، طیف سنجی تبدیل فوریه مادون قرمز (FT-IR)، پراش پرتو ایکس (XRD)، جذب و واجذب هم دمای نیتروژن (BET)، مغناطیس سنج نمونه ارتعاشی(VSM) شناسایی شدند. کارایی این نانوکاتالیزورها در فرایند فنتون برای تخریب رنگ Reactive Red ME4BL (RR ME4BL) به عنوان یک آلاینده آلی مورد سنجش قرارگرفت. اثر پارامترهایی چون غلظت H2O2 و رنگ، مقدار کاتالیزور، pH و دما برای فرایند فنتون در تخریب رنگ بررسی شد. در شرایط بهینه H2O2(4mmolL-1)، Fe3O4 NPs(4mg)، RR ME4BL(100mgL-1) و pH=3 در دمای اتاق، 93درصد رنگ تخریب شد. سینتیک تخریب رنگ نیز بررسی شد و نتایج نشان دادند که اکسیداسیون RR ME4BL در فرایند فنتون شبه درجه اول است.
- چکیده انگلیسی: In this study, magnetic nanoparticles (Fe3O4 NPs) and magnetic supported on functionalized activated carbon (Fe3O4/AC NPs) were synthesized by co-precipitation method under N2 gas. These nanocatalysts were characterized by Fourier Transform Infrared Spectrometry (FT-IR), X-Ray Diffusion (XRD), adsorption and desorption isotherms of N2 (BET) and Vibrating Sample Magnetometer (VSM). The catalytic activity of these nanocatalysts in Fenton heterogeneous process was evaluated by the degradation of reactive red ME4BL (RR ME4BL) textile dye as a model of organic pollutant. The effect of parameters such as H2O2 concentration, RR ME4BL concentration, the amount of catalyst, pH and temperature in the degradation of dye for Fenton process. At the optimum conditions, H2O2 (4mmolL-1), Fe3O4 NPs (4mg), RR ME4BL (100mgL-1) and pH=3 at room temperature, the dye was degraded 93%. The kinetics of degradation of RR ME4BL by Fenton processes was also studied and the results showed that the oxidation of RR ME4BL follows the pseudo-first order.
- انتشار مقاله: 05-04-1397
- نویسندگان: شهربانو رحمان ستایش,پگاه نظری,ندا عسکری
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: استخراج فاز جامد,کلینوپتیلولیت اصلاح شده با ستیل پیریدینیوم کلرید,سولفاسالازین,اندازه گیری مقادیر ناچیز
- چکیده: در این تحقیق، کلینوپتیلولیت با ستیل پیریدینیوم کلرید به صورت در محل اصلاح شد و به منظور استخراج فاز جامد-اندازه گیری سولفاسالازین مورد استفاده قرار گرفت. مشخصات این جاذب توسط میکروسکوپ الکترونی روبشی، پراش پرتو ایکس، تکنیک تجزیه حرارتی-وزنی، تصویر برداری پراکنش الکترونی و طیف سنجی تبدیل فوریه-مادون قرمز تعیین گردید. جاذب تهیه شده، به دلیل دارا بودن واحد های ستیل پیریدینیوم می تواند برهمکنش های غیرقطبی و یونی برقرار کند. شرائط تاثیر گذار غلظت ستیل پیریدینیوم کلرید، pH، مقدار کلینوپتیلولیت، مدت زمان استخراج، ترکیب محلول شویشی و مقدار آن، مدت زمان شویش و قدرت یونی محیط استخراج مورد ارزیابی قرار گرفتند، و بهترین شرائط به منظور فراهم شدن بیشترین حساسیت اندازه گیری به روش رنگ سنجی در طول موج 450 نانومتر انتخاب شدند. در شرائط بهینه، محدوده خطی و حد تشخیص روش اندازه گیری سولفاسالازین ،به ترتیب، 5 - 02/0 میکرومول بر لیتر و 4 نانومول بر لیتر سولفاسالازین بوده است. با این روش سولفاسالازین در چند فرمولاسیون داروئی با موفقیت اندازه گیری شد. همچنین چندین نمونه خاک و آب محیطی به منظور ارزیابی کاربردپذیری روش ارائه شده، مورد تجزیه قرار گرفتند.
- چکیده انگلیسی: In this research, clinoptilolite was modified in situ by using cetylpyridinium chloride and used for solid phase extraction-determination of sulfasalazine. Characteristics of the adsorbent were determined by scanning electron microscopy, X-ray diffraction spectroscopy, thermogravimetric analysis, EDX-mapping and Fourier transform-infrared spectroscopy. The prepared adsorbent is able to interact through non-polar and ionic interactions, due to having cetylpyridinium moieties. Cetylpyridinium chloride concentration, pH, amount of clinoptilolite, extraction time, composition and volume of the eluent, elution time and ionic strength as the affecting parameters were evaluated, and the best conditions were selected to achieve the maximum sensitivity for the spectrophotometric determination of sulfasalazine at 450 nm. Under the optimum conditions, linear range and limit of detection for sulfasalazine were 0.02-5 µmol L-1 and 4 nmol L-1, respectively. Sulfasalazine in different pharmaceutical formulations was determined by the method, successfully. As well, various soil and environmental water samples were analyzed to evaluate the applicability of the established method.
- انتشار مقاله: 07-02-1397
- نویسندگان: حبیب ا... اسکندری,فرزاد رئیسی,اسلام پوربشیر
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: جاذب,حذف رنگ آنیونی,ZnO/ZnAl2O4 آلائیده با یون مس (II)
- چکیده: در این پژوهش ZnO/ZnAl2O4 آلائیده با یون مس(II) تهیه شد. نمونه توسط روشهای دستگاهی پراش اشعه ایکس (XRD)، طیف سنج مادون قرمز تبدیل فوریه(FT-IR)، میکروسکوپ الکترونی روبشی (SEM) مجهز به اسپکتروسکوپی پراکندگی انرژی اشعهی ایکس (EDX) و اسپکتروسکوپی نشری پلاسمای جفت شده القائی (ICP) شناسائی شد. کارائی نمونه به عنوان جاذب برای حذف رنگهای آنیونی و کاتیونی متیل اورنژ، کنگورد، متیلن بلو و مخلوط رنگهای متیلن بلو و متیل اورنژ از محلول آبی بررسی شد. علاوه براین کارائی این نمونه با نمونهی ZnO/ZnAl2O4 مقایسه شد. مدلهای سینتیکی شبه مرتبهی اول و شبه مرتبهی دوم امتحان شد. نتایج نشان داد که نمونهی ZnO/ZnAl2O4 آلائیده با یون مس (II) یک انتخاب امیدبخش برای حذف رنگ آنیونی متیل اورنژ از پساب است.
- چکیده انگلیسی: In this research, the Cu(II) doped ZnO/ZnAl2O4 was prepared. The sample was characterized using X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM) equipped with Energy dispersive X-ray spectroscopy (EDX) and Inductivity coupled plasma atomic emission spectroscopy (ICP-AES). Efficiency of the sample as an adsorbent for anionic and cationic dyes removal such as Methyl orange, Congo red, Methylene blue and dyes mixture of Methylene blue and Methyl orange in aqueous solution was investigated. Furthermore, efficiency of this sample with undoped sample was compared. Pseudo- first order and pseudo- second order kinetic models were examined. The results showed that the Cu(II) doped ZnO/ZnAl2O4 sample is a promising candidate for removal of Methyl orange anionic dye from wastewater.
- انتشار مقاله: 13-04-1397
- نویسندگان: فاطمه آبسالان,مریم موحدی,ناهید رسولی
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: بنزیل الکل,پلی سایل-سزکویی-اکسان,فتالوسیانین,اکسایش کاتالیزوری
- چکیده: در این مطالعه، نوعی پلی سایل-سزکویی-اکسان با گروه عاملی کلر تهیه و کمپلکس مس فتالوسیانین عامل دار بر روی این پلیمر تثبیت شد. پلیمر عامل دار تهیه شده، به وسیله الگوی پراش پرتو ایکس، میکروسکوپ الکترونی روبشی گسیل میدانی و طیف نگاری فروسرخ شناسایی گردید. سپس این پلیمر عامل دار به عنوان کاتالیزگر در اکسایش بنزیل الکل به کار گرفته شد و پارامتر های نوع اکسنده، نوع حلال، مقدار کاتالیزگر، دما و زمان واکنش بهینه گردید. بهترین بازدهی به میزان70 درصد در طی 4 ساعت برای 40 میلی گرم کاتالیزگر در حلال استونیتریل با اکسنده ی ترشیو بوتیل هیدروژن پراکسید در دمای 82 درجه سانتیگراد به دست آمد.
- چکیده انگلیسی: In this research, poly organo silsesquioxane with a functional group which contains the chlorine atom has been prepared to support a functionalized phthalocyanine complex. The prepared catalyst has been characterized with powder X-ray diffraction pattern, field emission scanning electron microscopy and infrared spectroscopy. This catalyst was then used for catalytic oxidation of benzyl alcohol and some parameters in this model reaction have been optimized such as the type of oxidant and solvent, amount of catalyst, reaction temperature and time. It was found that the optimum conditions are 40 mg catalyst in acetonitrile as solvent with tert-butylhydroperoxide as oxidant at 82 C which gives 70% yield.
- انتشار مقاله: 31-05-1397
- نویسندگان: مهدی میرزایی,معصومه فقانی,علی کیوانلو
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: امپدانس الکتروشیمیایی,NiCuFe2O4,ناپروکسن,الکترود خمیری
- چکیده: یک روش ساده و در عین حال حساس برای اندازهگیری ناپروکسن بر مبنای الکترود کربن خمیری اصلاح شده با NiCuFe2O4 و نانولوله های چند دیواره کربنی گزارش شده است. این الکترود اصلاح شده به صورت اختصار به صورت (MWCNTs/NiCuFe2O4/CPE) نشان داده شده است. رفتار الکتروشیمیایی ناپروکسن بر الکترود اصلاح شده با تکنیکهای مختلفی نظیر ولتامتری چرخه ای، ولتامتری پالس تفاضلی و امپدانس الکتروشیمیایی بررسی شده است. لازم به ذکر است الکترود اصلاح شده خواص الکتروکاتالیستی بالایی نسبت به ناپروکسن نشان داده و یک پیک اکسایش مشخص در 02/1+ ولت نسبت به الکترود مرجع Ag/AgCl از خود نشان میدهد. این حسگر همچنین توانایی اندازهگیری ناپروکسن را در حضور استامینوفن بدون هیچ مزاحمتی از خود نشان میدهد. این انتخابگری بالا باعث میشود روش ارائه شده به طور موفقیت آمیزی برای اندازهگیری ناپروکسن در نمونههای بیولوژیکی بکار رود.
- چکیده انگلیسی: A facile and sensitive method was used to fabricate a novel sensor for the determination of naproxen on the surface of multi-walled carbon nanotubes modified NiCuFe2O4 paste electrode (MWCNTs/NiCuFe2O4/CPE). Adding NiCuFe2O4 to MWCNTs effectively increased the real surface area, and most importantly, amplified the electron transfer. The surface analyses techniques perfectly certified that MWCNTs and spinel were well dispersed in graphite matrix. According to the results, MWCNTs/NiCuFe2O4/CPE produced a sharp peak for naproxen oxidation at about +0.93 vs Ag/AgCl reference electrode at pH 5.0. The proposed electrode revealed a linear response over 0.1-480 µM with a detection limit of 0.05 µM. Finally, this electrode also has the ability to determine naproxen in the presence of acetaminophen without any interference. The brilliant properties of modified electrode such as its lack of toxicity, simplicity of fabrication, and relative inexpensiveness showed that it has feasible to determine naproxen in biological samples.
- انتشار مقاله: 18-01-1397
- نویسندگان: حسین صلواتی,معصومه طایی,ناهید رسولی,علی ظهور,گلشن آشیان
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: جاذب زیستی,کامپوزیت CS-GO-MnFe2O4,جداسازی مغناطیسی,نفتول بلو بلک
- چکیده: در این مطالعه، کامپوزیت کیتوسان- گرافن اکسید- منگنز فریت CS-GO-MnFe2O4)) تهیه و به عنوان یک جاذب زیستی مغناطیسی برای تصفیه آب استفاده شد. ریخت شناسی، ساختار شیمیایی و خصلت مغناطیسی کامپوزیت با کمک آنالیزهای FTIR، XRD، SEM و VSM توصیف شد. کامپوزیت حاصل، ظرفیت جذب خوبی برای خارج کردن نفتول بلوبلک (NBB) به عنوان مدلی برای رنگهای اسیدی، از آب نشان داد. جذب NBB بر روی کامپوزیت CS-GO-MnFe2O4 با درنظر گرفتن pH، زمان جذب، غلظت اولیه NBB و دما بررسی شد. مطالعه سینتیک جذب و ایزوترمها در pH بهینه 0/6 نشان داد که سینتیک شبه مرتبه دوم و مدل ایزوترم لانگمیر به خوبی فرایند جذب را توصیف می کنند. مقادیر کمیتهای ترمودینامیکی
(ΔG, ΔH, ΔS) نشان دادند که فرایند جذب دارای طبیعت خودبه خودی وگرماده است. نتایج نشان دادند که در 60 دقیقه زمان تماس با غلظت اولیه mg L−1 40 می توان به خارج کردن بیش از %80 از رنگ دست یافت.- چکیده انگلیسی: In this study, a novel chitosan, graphene oxide and MnFe2O4 composite (CS-GO-MnFe2O4) was prepared as a magnetic bioadsorbent for water purification. The morphology, chemical structure and magnetic property of the composite were characterized by FT-IR, XRD, SEM and VSM analysis. The resulting composite shows good adsorption capacity for removal of naphthol blue black (NBB) as an acid dye model, in water. Adsorption of NBB onto CS-GO-MnFe2O4 was investigated with respect to pH, adsorption time, initial NBB concentration and temperature. The study of the adsorption isotherms and kinetics at the optimum pH 6.0, revealed that the pseudo-second-order kinetic and Langmuir isotherm model well-described kinetics and equilibrium adsorptions, respectively. The values of thermodynamic parameters (ΔG, ΔH and ΔS) indicated that the adsorption process is spontaneous and exothermic in nature. The results show that, more than 80% color removal could be achieved in 60 min contact time with 40 mg L−1 of initial concentrations.
- انتشار مقاله: 26-02-1397
- نویسندگان: زهرا ملایی,مهشید حمزه لوئیان,کوثر قاسمی,فاطمه سلیمانیان
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: سولفوناسیون,یون سرب,غشا تعویض کاتیونی,روش تغییر فاز,دیالیز نفوذی
- چکیده: در این تحقیق حذف یون سرب در فرآیند دیالیز نفوذی مورد بررسی قرار گرفت. غشاهای مورد استفاده به روش تغییر فاز و از پلیاترسولفون سولفونه به غلظتهای 12، 14 و 18% وزنی ساخته شدند. خصوصیات فیزیکی این غشاها شامل ظرفیت تبادل یون، محتوای آب، تخلخل و ضخامت مورد بررسی قرار گرفتند. برای بررسی عملکرد غشا تبادل کاتیون، طراحی آزمایش انجام و سه متغیر در سه سطح در نظر گرفته شدند. با استفاده از آنالیز سیگنال به نویز (SNR) مشخص شد پارامتری که بیشترین تاثیر در شار یون سرب عبوری از غشا داشته، مربوط به غلظت یون سرب در خوراک بوده است. تاثیر افزودن نانو ذره رس به بهترین غشا از نظر میزان شار یون سرب و همچنین، تأثیر وجود یون سدیم در محلول خوراک در میزان عبوردهی یون سرب مورد بررسی قرار گرفت. در بهترین شرایط، خوراک باغلظت ppm100 و خوراک با غلظت ppm5000 به ترتیب دارای شار 5-10× 08/4 و mmol/s.m2 2-10×56/6 بودهاند.
- چکیده انگلیسی: In this research, removal of the lead ion in the diffusion dialysis was investigated. The membranes was prepared using sulfonated polyethersulfone at 12, 14 and 18 wt.% concentration by the phase inversion method. Their physical properties including the ion exchange capacity, water content, porosity and thickness of membranes were investigated. For investigation of cation exchange membranes performance, experimental design was developed. Three parameters in three levels were selected. By using signal to noise ratio (SNR), the parameter which had the most effect on the lead ion transport was the concentration of the lead ion in the feed. Furthermore, the effect of sodium ion presence in the feed on the lead ion transport was studied. The effect of addition of nanoclay to the optimum membrane was studied. In the optimum condition, the feed with 100 ppm and 5000 ppm concentrations had the flux of 4.08×10-5 and 6.56×10-2 mmol/s m2, respectively.
- انتشار مقاله: 22-02-1397
- نویسندگان: حسین خزایی,مهدی امیری نژاد
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: بیوسنتز,متیل دوپا,ولتامتری,نانوذره طلا,1-متیل-3-اکتیل-ایمیدازولیم کلراید
- چکیده: در این کار، یک سنسور الکتروشیمیایی حساس بر اساس الکترود خمیرکربن اصلاح شده با نانوذره طلا و مایع یونی 1-متیل-3-اکتیل-ایمیدازولیم کلراید ساخته شده و به عنوان سنسور برای آنالیز داروی متیل دوپا بکار گرفته شد. نانوذرات طلا با استفاده از عصاره گیاه گزنه سنتز شده و با استفاده از روش اسپکتروسکوپی مرئی-فرابنفش و میکروسکوپ الکترونی عبوری مورد ارزیابی قرار گرفت. الکترود اصلاح شده اثرکاتالیزوری بسیار مناسبی را بروی سیگنال اکسایشی متیل دوپا نشان داده است. بررسی اثر pH نشان میدهد که الکترواکسیداسیون متیل دوپا با دو الکترون و دو پروتون انجام می شود. سنسور طراحی شده در محدوده خطی بین 550-08/0 با حدتشخیص 04/0 مولار برای اندازهگیری متیل دوپا بکارگرفته شد. در نهایت سنسور طراحی شده با موفقیت برای اندازهگیری متیل دوپا در نمونه قرص و ادرار بکارگرفته شد.
- چکیده انگلیسی: In this work, an electrochemical sensor based on carbon paste electrode modified with Au nanoparticle and 1-methyl-3-octylimidazolium chloride was fabricated as a sensor for determination of methyldopa. Au nanoparticle synthesized by Nettle extract and characterized by UV-Vis and TEM methods. The modified electrode showed good electrical conductivity for methyldopa signal. The effect of pH showed that electro-oxidation of methyldopa occurred with two electrons and two protons. The fabricated sensor showed the dynamic range 0.08-550 μM with detection limit 0.04 μM for determination of methyldopa. In the final step, the fabricated sensor was used successfully for determination of methyldopa in tablet and urine samples.
- انتشار مقاله: 30-03-1397
- نویسندگان: مریم عباس قربانی,مریم عباس قربانی,مریم عباس قربانی
- مشاهده