در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: نانو کامپوزیت,پلی وینیل پیرولیدون,اکسید آهن,پلیمریزاسیون اکسایشی شیمیایی,پلی تیوفن,جذب آرسنیک (III)
- چکیده: پلی تیوفن و نانوکامپوزیتهای آن با روشپلیمریزاسیون اکسایشی شیمیایی مونومر تیوفن با استفاده از کلریدآهن (III) به عنوان اکسیدانت و پلی وینیل پیرولیدون به عنوان سورفکتانت در محیط آبی/غیر آبی تهیه شد. پلی تیوفن و نانوکامپوزیتهای آن از نظر مورفولوژی، نوع گروههای عاملی سطحی و ساختار کریستالی توسط میکروسکوپ الکترونی روبشی (SEM)، طیف مادون قرمزفوریر(FTIR) و پراش اشعه ایکس(XRD) مشخصهیابی شدند. تصاویر میکروسکوپ الکترونی روبشی محصولات، مورفولوژی سطحی متفاوتی را در حضور پلی وینیل پیرولیدون و نانو ذره اکسید آهن نشان دادند. نتایج نشان داده شده از طیف سنج مادون قرمز بیانگر آن است که شدت پیکها به نوع سورفکتانت بستگی دارد. پیک های اضافی در منحنی XRD و افزایش شدت پیک های پلیمر، وجود نانو ذره اکسید آهن را در ساختار پلیمری نانوکامپوزیت-های پلی تیوفن نشان داد. هدف بعدی این مطالعه بررسی ویژگیهای جذب سطحی پلی تیوفن و نانو کامپوزیتهای آن در حذف یون آرسنیک (III) در محیط آبی است. جذب یون آرسنیک (III) در سیستم ناپیوسته مورد بررسی قرار گرفت و شرایط بهینه pH = 6، مقدار جاذب 1/0 گرم و زمان تماس کمتر از 40 دقیقه بدست آمد. تطابق دادهها با خطوط ایزوترم و معادلات سینتیک نشان داد که معادله لانگمویر و سینتیک شبه درجه دوم تطابق بهتری با دادهها دارند.
- چکیده انگلیسی: Polythiophene (PTh) and its nanocomposites were successfully synthesized by the in situ chemical oxidative polymerization method in the presence of ferric chloride as an oxidant and poly (vinyl pyrrolidone) as surfactant in aqueous/non-aqueous media. The adsorbents were characterized in terms of, morphology and chemical structure by different techniques such as FT-IR, SEM and XRD. The scanning electron micrographs of polythiophene and its nanocomposites prepared in aqueous/non-aqueous media showed differences in the surface morphologies in the presence poly (vinyl pyrrolidone) and &gamma-Fe_2 O_3 nanoparticles. The FTIR spectra showed that the intensity of peaks was related to the type of surfactant. The crystalline natures of nanocomposites were determined by XRD analysis. The extra peaks in the XRD pattern of nanocomposites indicate the presence of &gamma-Fe_2 O_3 nanoparticles in the polythiophene matrix. The aim of this research was to investigate the sorption characteristic of polythiophene and its nanocomposites for the removal of As (III) from aqueous solution. The presence of surfactants leads to improve the adsorption of As (III) by changing the surface morphology of polythiophene/Fe2O3 nanocomposites. The removal percentage of As (III) was carried out by using batch process mode. The adsorption of As (III) onto polythiophene/Fe2O3 nanocomposites was found to be strongly dependent on the solution pH. The optimum conditions of sorption were found to be: contact time of 40 min, 0.1 g of adsorbent dosage and pH 6 . Among of the several conventional isotherm and kinetic models, langmuir and second-order models showed reasonable fit to the adsorption equilibrium data, respectively.
- انتشار مقاله: 28-08-1394
- نویسندگان: حسین عیسی زاده,عاصفه همتی
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: اکسایش پیشرفته,تخریب رنگ,سونوالکتروشیمی,نانوذرات تیتانیومدیاکسید
- چکیده: در این تحقیق، حذف رنگزای بازیک زرد 28 با استفاده از روش اکسایش پیشرفته سونوالکتروشیمی در حضور نانوذرات تیتانیوم دیاکسید مورد بررسی قرار گرفت. به منظور بهینهسازی شرایط تخریب رنگ از روش سطح پاسخ استفاده شده است. تاثیر عوامل مختلف نظیر مقدار ولتاژ اعمال شده، مقدار نانوذرات تیتانیوم دیاکسید، زمان فرآیند و pH محلول به صورت همزمان بر میزان تخریب رنگ مورد ارزیابی قرار گرفتهاند. با کمک این روش یک مدل ریاضی به منظور پیشبینی مقدار حذف رنگ با توجه به متغیرهای مستقل یاده شده، ارایه گردید. نتایج حاصل نشان داد که متغیر زمان بیشترین تاثیر را بر راندمان رنگبری داشته است. pH، ولتاژ اعمال شده و مقدار نانوذرات تیتانیوم دیاکسید به ترتیب از جمله عوامل تاثیرگذار بعدی میباشد. در شرایط بهینه که شامل 8= pH ، زمان 119 دقیقه، مقدار ولتاژ اعمال شده V 1/1و 0.96g/L نانوذرات تیتانیوم دی اکسید میباشد. نتایج حاصل نشان داد که روش سونوالکتروشیمی در حضور نانوذرات تیتانیومدیاکسید کارایی بهتری در حذف رنگ نسبت به روشهای دیگر نظیر سونوالکتروشیمی، سونوشیمی در حضور هیدروژن پروکسید، سونوشیمی در حضور هیدروژن پروکسید و نانوذرات تیتانیوم دیاکسید و الکتروشیمی در حضور نانوذرات تیتانیومدی اکسید دارا میباشد.
- چکیده انگلیسی: In this work, discoloration of basic yellow 28 using sonoelectrochemical method in presence of titanium dioxide nanoparticles was investigated. The respond surface methodology (RSM) was applied for optimization of discoloration. The influence of different factors such as applied potential, amount of titanium dioxide nanoparticles, time and solution pH was evaluated on discoloration. A mathematical model was presented to prediction of discoloration with RSM. The results shown that time has highest effect on discoloration efficiency, pH, applied potential and amount of titanium dioxide nanoparticles has also effective factors. The sonoelectrochemical route in presence of TiO2 nanoparticles has better performance on discoloration comparing with other methods including sonoelectrochemistry, sonochemistry in presence of hydrogen peroxide, sonochemistry in presence of hydrogen peroxide/TiO2 nanoparticles and electrochemistry in presence of TiO2 nanoparticles at optimum condition, i.e. pH= 8.0, 1.1 V applied potential, 0.96 g/L TiO2 nanoparticles and 119 min.
- انتشار مقاله: 27-07-1394
- نویسندگان: علی اعتمادی فر,محمد دهقانی,نوید نصیری زاده,سعید جعفری
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: شبکه عصبی مصنوعی,مولکول نگاری پلیمری,استخراج آهن,نمونه های حقیقی
- چکیده:
- چکیده انگلیسی: In this study, a new modeling method based on three-layer artificial neural network (ANN) techniques has been employed to predict the extraction yield of iron from real samples by means of molecularly imprinted polymer. Input variables of the model were pH, absorption and desorption time, ligand amount and volume of solution while the output was extraction yield of iron ions. The mean squared error and correlation coefficient between the experimental data and the ANN predictions were determined as 0.0036 and 0.96428 for training, 0.0020 and 0.96232 for validation and 0.0004 and 0.9962 for testing data sets. The detection limit of the proposed method was 3.1 &mug. L-1. Dynamic linear range in the range of 200-1000 &mug. L-1 was obtained. The relative standard deviation was found to be below 8.8%. The method was applied to the recovery and determination of Fe in a few different real samples.
- انتشار مقاله: 17-08-1394
- نویسندگان: حسین هاشمی,حسین هاشمی,حسین هاشمی
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: متانول,دور همزن,ZnAPSO-34,سنتز هیدروترمال,الفینهای سبک
- چکیده: کاتالیست نانوساختار ZnAPSO-34 با روش هیدروترمال در شرایط همزده و ساکن با موفقیت سنتز شد. تاثیر دور همزن بر روی بلورینگی، مورفولوژی، سطح ویژه و عملکرد کاتالیستی مورد بررسی قرار گرفت. کاتالیستهای سنتزی با روشهای مختلف از قبیل XRD، FESEM، BET و FTIR تعیین خصوصیات شدند. با افزایش دور همزن، در ابتدا بلورینگی نسبی افزایش یافت و با افزایش بیشتر دور همزن، به علت کریستالیزاسیون مجدد، بلورینگی نسبی کاهش یافت. با استفاده از روش هیدروترمال همزده، نانوذرات ZnAPSO-34 با توزیع اندازه ذرات یکنواخت تولید شد. کاتالیستهای سنتز شده در فرایند MTO مورد استفاده قرار گرفتند و تاثیر شرایط سنتز بر روی عملکرد کاتالیستی مورد بررسی قرار گرفت. نمونهی سنتز شده در دور rpm 300 پایداری طولانیتری از خود نشان داد و تولید متان در این نمونه کم بود.
- چکیده انگلیسی: Nanostructured ZnAPSO-34 catalyst was successfully synthesized in stirring and static conditions via hydrothermal method. Effect of difference rpm of stirring on the crystallinity, morphology, surface area and catalytic performance of ZnAPSO-34 were investigated. Synthesized catalysts were characterized by various methods such as XRD, FESEM, BET and FTIR techniques. By increasing of stirring rpm, relative crystallinity initially increased and then reduced. By using of hydrothermal method under stirred conditions, nanoparticles of ZnAPSO-34 with narrow particle size distribution were produced. The synthesized catalysts were applied in methanol to ethylene and propylene process and effect of synthesis conditions on catalytic performance was investigated. The synthesized sample at 300 rpm exhibited the longer lifetime than the other samples. Moreover, methane formation for this sample was low.
- انتشار مقاله: 01-10-1393
- نویسندگان: محسن یزدانی,محمد حقیقی,سوگند آقامحمدی
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: آب,تبدیل موجک پیوسته,باز شیف,اندازه گیری همزمان,خواربار
- چکیده: در این تحقیق، اندازه گیری اسپکتروفتومتری همزمان طیفهای دارای همپوشانی یونهای آهن (III) و آلومینیوم (III) توسط لیگاند سنتری جدید توسط روش تبدیل موجک پیوسته(CWT) - نقطه برخورد صفر انجام شده است. 0/8 ، 10 دقیقه بعد از اختلاط و غلظت 3-10× 0/5 مولار باز شیف به عنوان شرایط بهینه انتخاب گردیدند. نتایج نشان داد که یونهای یونهای آهن (III) و آلومینیوم (III) به ترتیب در رنج mg L-1 0/7-5/0، و mg L-1 5/6-5/0 قابل اندازهگیری هستند. کلاه مکزیکی و سیملت-4 از توابع موجک انتخاب گردیدند و تحت شرایط بهینه برای اندازه گیری مخلوطهای دو جزئی به کار رفتند. روشهای پیشنهادی به طور موفق در تعیین این عناصر در نمونههای آب و خواربار به کار برده شدند. نتایج روش پیشنهادی با نتایج حاصل از روش اسپکترومتری جذب اتمی شعله (FAAS) مقایسه گردیدند.
- چکیده انگلیسی: Continuous wavelet transform together with zero-crossing technique was applied to the overlapping spectra of Fe(III) and Al(III) complexes. It was found that, at 5. 0 × 10-5 mol L-1 of DPBDO, pH 8.0 and 10 minute after mixing the complexation reactions were completed. The results showed that Fe(III and Al(III) could be determined simultaneously in the range of 0.5–7.0 mg L_1 and 0.5-6.5 mg L-1. Mexican and Symlet-4 from the family of continuous wavelet transforms were selected and applied under the optimal conditions for multi-component determinations. The method was tested by analyzing various synthetic birnary mixtures of analytes in different water and foodstuff samples. The obtained results of samples with proposed method have been compared with those predicted by flame atomic absorption spectrophotometry (FAAS).
- انتشار مقاله: 26-10-1394
- نویسندگان: مریم عباسی طریقت,خسرو محمدی,اعظم آشناگر
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: نیکل,استخراج فاز جامد مغناطیسی,نانوذرات مغناطیسی Fe3O4 اصلاح شده,نمونههای آبی و غذایی
- چکیده: در تحقیق حاضر، از یکی از روش های جدید توسعه یافته برای پیش تغلیظ و اندازهگیری مقادیر کم نیکل از نمونههای آبی و غذایی، استخراج فاز جامد مغناطیسی با استفاده از نانو ذرات مغناطیسی Fe3O4 اصلاح شده، استفاده شده است. اندازه گیری نیکل در این روش با استفاده از دستگاه جذب اتمی شعلهای انجام شده است. در این تحقیق اصلاح سطح نانوذرات توسط سورفاکتانت ستیل تری متیل آمونیوم برومید انجام شد و جهت افزایش انتخابگری از لیگاند &alpha- فوریل دی اکسیم به عنوان عامل کیلیت استفاده شد. پارامترهای مختلف موثر بر استخراج و پیش تغلیظ نیکل از قبیل pH محلول نمونه، غلظت لیگاند، مقدار جاذب، حجم نمونه، نوع و غلظت شوینده و اثر یونهای مزاحم بررسی و بهینه شدند. تحت شرایط بهینه، منحنی کالیبراسیون در محدوده 1 تا 100 میکروگرم بر لیتر خطی بوده و حد تشخیص روش برابر 3/0 میکروگرم بر لیتر بهدست آمد. این روش توسعه یافته با موفقیت برای تعیین مقدار نیکل در نمونههای آبی و غذایی (کاهو، هویج، اسفناج) بهکار برده شد. مقادیر راندمان نسبی اندازه گیری نیکل در نمونه های آبی 0/103-3/97 درصد و در نمونه های غذایی 5/99-0/96 درصد بهدست آمد. نتایج نشان میدهد نانو ذرات مغناطیسی میتواند بهعنوان جاذب موثر و ارزان برای پیش تغلیظ و استخراج نیکل از نمونههای حقیقی بکار رود.
- چکیده انگلیسی:  A new method for the separation and preconcentration of trace amounts of nickel in food and water samples by magnetic solid phase extraction (MSPE) with modified Fe3O4 magnetic nanoparticles and its determination by flame atomic absorption spectrometry has been developed. For this purpose, the modification of the nanoparticles was performed by surfactants cetyltrimethylammonium bromid. The extraction of nickel ions from the aqueous solution was performed with &alpha-Furildioxime as the chelating agent. The varius parameters affecting the extraction and preconcentration of nickel were investigated and optimized. Under the optimal conditions, the calibration curve showed an excellent linearity in the concentration range of 1-100 µg L-1 and the limit of detection was 0.3 µg L-1 of nickel. The developed method was successfully applied to the determination of nickel in food and water samples. The relative recoveries for determination of nickel in food and water samples was between 96/0-99/5% and 97/3-103/0%, respectively. The results showed that, magnetic nanoparticles can be used as a cheap and efficient adsorbent for the extraction and preconcentration of nickel from real samples.
- انتشار مقاله: 25-05-1394
- نویسندگان: فاطمه غلامی,ریحانه راهنما
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: الکترود خمیر کربن,پیریدیم,SnO2-Zn2SnO4
- چکیده: دراین کار تحقیقاتی نانو کامپزیت SnO2-Zn2SnO4 با روش حالت جامد ساخته شد. خصوصیات این نانو ذرات با تکنیکهای مختلف از قبیل اسپکتروسکوپی پرتو ایکس و میکروسکوپ نشر الکترون بررسی شد. سپس یک حسگر الکتروشیمیایی برای اندازه گیری پیریدیم با استفاده از این نانو ذرات ساخته شد. این حسگر خواص الکترو کاتالیست بسیار عالی برای اندازه گیری پیریدیم نشان داد. پیک اکسایش این دارو در محدوده 0.3 تا 607.0 میکرومولار از پیریدیم خطی است. حد تشخیش 0.009 میکرومولار برای این روش پیشنهاد شد. این روش پیشنهادی بسیار انتخاب گر و ساده با دقت بالا برای اندازه گیری پیریدیم در نمونه های دارویی و مایعات بیولوژیکی است.
- چکیده انگلیسی: The SnO2-Zn2SnO4 nanocomposite was successfully prepared via a simple solid state method. The resulted nanocomposite was characterized by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Then, a novel pyridium sensor has been developed based on SnO2-Zn2SnO4 nanocomposites modified carbon paste electrode (SnO2-Zn2SnO4/CPE). The fabricated sensor exhibits outstanding electrocatalytic activities toward the oxidation of pyridium. The oxidation peak current was proportional to the concentration of pyridium from 0.3 to 607.0 µM with a detection limit of 0.009 µM at signal to noise ratio of 3. The proposed method was examined as a selective, simple and precise method for voltammetric determination of pyridium in real samples with satisfactory results.
- انتشار مقاله: 29-10-1394
- نویسندگان: معصومه طایی,فردین عابدی
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: نانوذرات,سل-ژل,فوتوکاتالیست,رنگ کنگورد
- چکیده: در این مطالعه، نانوذرات آلومینا (Al2O3) به روش سل-ژل تهیه شد. نانوذرات سنتز شده توسط طیف نگارهای پراش پرتو ایکس(XRD) ، میکروسکوپ الکترونی روبشی گسیل میدانی (FESEM) کوپل شده با آنالیز تفکیک انرژی (EDS)، تبدیل فوریه مادون قرمز (FT-IR)، ایزوترم های جذب و واجذب نیتروژن (BET) و (BJH) شناسایی و مشخصه یابی گردید. هر چند آلومینا به عنوان یک نارسانا معرفی شده است، نتایج به دست آمده در کار حاضر، اکسید فلز سنتزی مذکور را به عنوان یک فوتوکاتالیست مناسب جهت تخریب آلاینده رنگ کنگورد معرفی نمود. به علاوه اثر پارامتر های مختلف شامل زمان تابش، pH و مقدار کاتالیست بر روی تخریب رنگ کنگورد مورد بررسی قرار گرفت. بهترین نتایج تحت تابش نور مرئی در زمان تابش 30 دقیقه، pH=4 و 0/1 گرم کاتالیست بدست آمد.
- چکیده انگلیسی: In this study, alumina (Al2O3) nanoparticles were synthesized by a sol-gel method. The synthesized nanoparticles were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) coupled with energy dispersive spectroscopy (EDS), fourier transform infrared spectroscopy (FT-IR), adsorption-desorption N2 isotherms (BET) and (BJH). Although, alumina was known as an insulator, results in this work were shown, synthesized metal oxide, act as a suitable photocatalyst. The effect of various parameters including irradiation time, pH and catalyst dosage on the degradation of congo red dye was investigated. The best results were obtained under visible light radiation and at irradiation time 30 minute, pH=4, 0.1 g catalyst.
- انتشار مقاله: 30-10-1394
- نویسندگان: مهزاد فیروزی,آزیتا نوری,احمد نوزاد گلی کند
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: 3,2,واکنش کلیک,ضد میکروبی,1-تریآزولها,آلکیل آزیدها,اپوکسیدها
- چکیده: هسته های تری آزول، بخش بسیار مهمی از داروهای ضد میکروبی، ضد درد و ضد التهاب را تشکیل میدهند. در این مقاله سنتز تعدادی از3،2،1-تری آزول ها به روش آزیددار کردن متوالی الکلها و اپوکسیدها و سپس واکنش حلقهزایی آزید-آلکین کاتالیز شده با مس (I)[1] در آب توضیح داده شده است. ویژگی بیولوژیکی تعدادی از این ترکیبات هتروسیکل، نسبت به فعالیتهای ضد میکروبی با استفاده از روش پخش قرص کیربی-بوئر[2] بررسی شدهاند. نتایج بررسیهای دقیق بیولوژیکی این ترکیبات بسیار جالب توجه بوده است؛ به طوری که برخی از این ترکیبات نسبت به داروهای استاندارد شناخته شده از قابلیت ضد میکروبی بیشتری برخوردار بودند.
- چکیده انگلیسی: The triazole core is an important part of the therapeutically drugs such as antimicrobial, analgesic and anti-inflammatory agents. Therefore, a facile synthesis of a series of 1,2,3-triazoles has been introduced by the sequential azidation of alcohols or epoxides and then Cu (I)-catalyzed azide-alkyne cycloaddition (CuAAC) in water. The biological profiles of some of these five-membered heterocyclic scaffolds toward anti-bacterial activities were evaluated using Kirby-Bauer Disc Diffusion method. The biological obtained results were very interesting and revealed that most of the examined molecules are potent antibacterial agents when compared with standard drugs.
- انتشار مقاله: 10-11-1394
- نویسندگان: محمد جواهریان,فواد کاظمی,محمد رجب کلانترزاده,حسین معتمدی
- مشاهده
- جایگاه : پژوهشی
- مجله: شیمى کاربردى
- نوع مقاله: Journal Article
- کلمات کلیدی: زئولیت,نانوکامپوزیت,فعالیت ضد باکتری,نانوذرات نقره اکسید,موردنیت بزرگ
- چکیده: زئولیت ها آلومینوسیلیکات های بلوری با ساختار میکروحفره منظم می باشند. با توجه به ساختار و ترکیب زئولیت ها، آنها به طور وسیعی به عنوان جاذب، شوینده ها، تبادل گرهای یونی، کاتالیزورهای ناهمگن و به ویژه به عنوان میزبان برای فلز اکسید و نانوساختارهای فلزی مورد استفاده قرار می گیرند. نقره اکسید (Ag2O) یک نیمه رسانای ذاتی نوع p با شکاف انرژی eV 46/1 است که تحقیقات زیادی بر روی آن به عنوان ماده ای که پتانسیل کاربردهای عملی در مواد ضد باکتری، فتوکاتالیست، باتری های نقره اکسید و حسگرهای گازی را دارد، انجام گرفته است. در این مطالعه، نانو ذرات کروی Ag2O در ماتریس موردنیت بزرگ سنتز شد. نمونه ها بوسیله پراش اشعه ایکس (XRD)، طیف سنجی مادون قرمز تبدیل فوریه (FTIR)، میکروسکوپ الکترونی عبوری (TEM) و میکروسکوپ الکترونی روبشی (SEM) مورد شناسایی قرار گرفتند. تصاویر TEM، نانو ذرات کروی کوچک Ag2O را با قطر متوسط 14-2 نانومتر نشان داد. فعالیت ضدباکتری نانو کامپوزیت Ag2O/Large Mordeniteبرای باکتری های گرم منفی اشرشیا کلی و گرم مثبت استافیلو کوکوس اورئوس بررسی و با آنتی بیوتیک های استاندارد مقایسه شد.
- چکیده انگلیسی: Zeolites are crystalline aluminosilicates with a well-defined microporous structure. Depending on their structure and composition, zeolites are widely used as sorbents, detergents, ion-exchangers, heterogeneous catalyst and especially as host for metal oxide or metal nanostructures. Silver oxide (Ag2O), an intrinsic p-type semiconductor with band gap1.46eV, has been widely investigated as an essential material for potential practical applications in antibacterial material, photocatalysis, silver-oxide batteries, and gas sensing. In this study, the spherical structure of Ag2O NPs was synthesized in the Large Mordenite matrix. The samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), and Scanning electron microscopy (SEM). TEM images show small spherical nanoparticles belong to Ag2O nanoparticles with mean diameter 2–14 nm. The antibacterial activity of Ag2O/Large Mordenite nanocomposite was tested against Gram- negative (E. coli) and Gram- positive (S. aureus) bacteria and compared with standard antibiotics.
- انتشار مقاله: 05-03-1396
- نویسندگان: مطهره محمدپور,افشین پوراحمد,لیلا اسدپور
- مشاهده