در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: Journal of Particle Science & Technology
- نوع مقاله: Journal Article
- کلمات کلیدی: High pressure,different pipes,Gas transportation,reinforced polyethylene,metal wire
- چکیده:
- چکیده انگلیسی: In this article various pipes used for transporting of gas are introduced and pros and cons of each one are elucidated. The pipes are categorized in three different subgroups including metallic, polymeric and metallic-wire reinforced polymeric pipes. Metallic-wire reinforced polymeric pipes are nominated as the best option for usage in high pressure pipelines transporting natural gas. As a result, some information about major manufacturers of this kind of polymeric pipes, raw material, production process and metallic-wire orientation are presented. Finally, from economical point of view, some calculations are done to estimate required amount of polymer and metallic-wire to manufacture such pipes. It is also possible to compare their manufacturing cost with usual metallic and polymeric pipes.
- انتشار مقاله: 08-01-1394
- نویسندگان: Omid Moini Jazani,Reyhaneh Khalafi,Mohammad Khosravi,Mohammad Reza Hassanpour,Danial Dadkhah,Mehdi Mostafaeian,Mohammad Mahdi Salehi,Hossein Riazi
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Particle Science & Technology
- نوع مقاله: Journal Article
- کلمات کلیدی: Reaction time,Anionic Polymerization,ε-Caprolactam,Polyamide 6
- چکیده:
- چکیده انگلیسی: The main objective of the present work was to synthesis polyamide 6 through anionic polymerization of ε-caprolactam in an internal mixer. The reaction time and the rheological properties of samples during the polymerization were studied. The samples were characterized by Thermo Gravimetry Analysis (TGA), Differential Scanning Calorimeter (DSC) and FT-IR spectrometer. The melt flow behavior and viscoelastic properties of the samples were studied by using a Rheometric Mechanical Spectrometer (RMS). The polymerization reaction was found to be very fast such that it completed within 6 minutes as could be detected by following the mixing torque which reached to a steady state after passing a maximum. These results suggest that there is a reaction time above which the viscoelastic behavior of the samples almost remained unchanged, while the viscosity and elasticity of the samples continue to decrease with polymerization reaction time as a result of thermochemical degradation.
- انتشار مقاله: 21-10-1393
- نویسندگان: Mohammad Mahdi Salehi,Omid Moini
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Particle Science & Technology
- نوع مقاله: Journal Article
- کلمات کلیدی: Mechanical properties,morphology,Ternary Blend,PP/PET/SEBS
- چکیده:
- چکیده انگلیسی: In this work, ternary polymer blends based on polypropylene (PP)/ polyethylene terephthalate (PET) /poly(styrene-b (ethylene-co-butylene)-b-styrene) (SEBS) triblock copolymer and a reactive maleic anhydride grafted SEBS (SEBS-g-MAH) at various compositions were prepared by co-rotating twin screw extruder. The effects of PET, SEBS and SEBS-g-MAH compatibilizer on morphology of the blends were examined by scanning electron microscopy (SEM). The blends morphology was also estimated by some predicting methods, however, SEM results revealed some contrasts between results of predicting methods and the real morphology. Population of individual and core-shell particles as well as average diameter of the rubber-based cavities is extremely dependent on SEBS, SEBS-g-MA and PET content. Mechanical inspection tests showed that in comparison with the pure PP, addition of SEBS/SEBS-MA causes an increase in the impact strength of the system. Keeping other parameters constant, with increase in SEBS rubbery phase, the core-shell morphology was affected and the impact strength increased consequently. On the other hand, increase in PET content results in modulus increase and the impact strength decrease. Finally, the optimum processing conditions for compounding ternary PP/PET/SEBS blends were achieved.
- انتشار مقاله: 29-08-1393
- نویسندگان: Omid Moini Jazani,Mohammad Ali Khoramabadi,Mohammad Mahdi Salehi,Hossein Riazi,Fariba Soltanokottabi
- مشاهده