در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: Journal of Solar Energy Research
- نوع مقاله: Journal Article
- کلمات کلیدی: Microgrids,PV systems,Hierarchal controller,non-linear load
- چکیده:
- چکیده انگلیسی: In this paper, a control approach for enhancing the characteristics of a microgrid system is presented. This microgrid includes a PV system in its DC link beside a DC/DC convertor as the interface for connecting to the system inverter. Due to this, the dynamics of the PV system is also considered. The capability of this control system in maintaining the significant feature of system signals under non-linear load or load variation is also investigated. The secondary controller in this system is designed to not only restore the system voltage and frequency but also preserve the value of active and reactive power before and after its operation. The simulation results show the capability of this control system in maintaining the system performance.
- انتشار مقاله: 03-05-1396
- نویسندگان: M. Mohammadian,A. Khodadadi,S.H. Hosseinian,M. Abedi
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Operation and Automation in Power Engineering
- نوع مقاله: Journal Article
- کلمات کلیدی: Hybrid Electric Vehicle,field oriented control,Dual mechanical port machine,Maximum torque per ampere,Flux weakening
- چکیده: ماشین الکتریکی با دو پورت مکانیکی در خودرو هیبرید الکتریکی به عنوان گیربکس متغیر پیوسته الکتریکی استفاده می شود. در خودروهای هیبرید الکتریکی، این ماشین جایگزین گیربکس و دو ماشین الکتریکی شده و ساختار خودرو ساده تر می گردد. در این مقاله کنترل برداری به روش جهت دهی میدان برای ماشین الکتریکی با دو پورت مکانیکی پیشنهاد شده است.
استراتژی کنترل پیشنهاد شده از الگوریتم ماکزیمم گشتاور به ازای جریان در سرعت های پایین و تضعیف شار در سرعت های بالا استفاده می کند. مدل ماشین الکتریکی با دو پورت مکانیکی با در نظر گرفتن کوپلاژ مغناطیسی بین دو فاصله هوایی در MATLAB/Simulink شبیه سازی شده و روش کنترل پیشنهادی به آن اعمال شده است. نتایج شبیه سازی با یک بررسی خلاصه در پایان ارائه شده است.- چکیده انگلیسی: A dual mechanical port machine (DMPM) is used as an electrically variable transmission (EVT) in hybrid electric vehicle (HEV). In the conventional HEV, this machine is replaced by a planetary gearbox and two electric machines and makes this structure simpler. This paper presents field oriented control (FOC) for DMPM. For HEV application, drive efficiency and wide operating speed range are important. The control strategy, which uses the maximum torque per ampere (MTPA) method at low speed and flux weakening (FW) method at high speed are proposed. The model of DMPM considering the magnetic coupling between two air gaps has been developed in MATLAB/Simulink and the proposed control strategy is applied to DMPM. The simulation results have been provided with a brief discussion at the end.
- انتشار مقاله: 30-05-1396
- نویسندگان: H. Afsharirad,M. B. B. Sharifian,M. Sabahi,S. H. Hosseini
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Operation and Automation in Power Engineering
- نوع مقاله: Journal Article
- کلمات کلیدی: Robust Control,Decentralized Control Lyapunov function,flexible AC transmission systems,Hybrid power flow controller,nonlinear control systems
- چکیده: در این مقاله، ساختار جدیدی برای اینورتر چند سطحی منبع جریان ارائه شده است که مناسب برای استفاده در ولتاژ پایین/متوسط میباشد. ساختار ارائه شده قادر است سطوح جریان دلخواه را در خروجی ایجاد نماید. همچنین، از مزایای ساختار پیشنهادی، قابلیت استفاده از منابع جریان DC متقارن یا نامتقارن میباشد. در حالت نامتقارن میتوان با انتخاب مناسب اندازه منابع ورودی، سطوح بیشتری در خروجی ایجاد کرد بدون آنکه ساختار مدار دچار تغییر شود. در نتیجه، در این مقاله چند روش برای محاسبه اندازه منابع جریان DC ورودی در حالت نامتقارن ارائه شده است. اینورتر پیشنهادی در مقایسه با اینورتر پل H (CHB)، دارای منابع جریان DC و کلیدهای نیمه هادی کمتری بوده و در نتیجه تعداد مدارات راه انداز نیز کاهش می یابد. استفاده از تعداد عناصر کمتر هم سبب کاهش هزینه و حجم مدار می گردد و هم سیستم کنترلی ساده تری را مورد نیاز خواهد بود. ویژگی دیگر ساختار ارائه شده، کاهش تلفات بدلیل کاهش تعداد کلیدهای در حالت روشن در هر لحظه میباشد. برای ارزیابی عملکرد ساختار پیشنهادی، شبیه سازی و نتایج عملی برای حالت های مختلف ارائه شده که نتایج صحت عملکرد ساختار پیشنهادی را نشان میدهند.
- چکیده انگلیسی: This paper investigates the robust decentralized nonlinear control of power flow in a power system using a new configuration of UPFC. This structure comprises two shunt converters and one series capacitor called as hybrid power flow controller (HPFC). A controller is designed via control Lyapunov function (CLF) and adaptive observer to surmount the problems of stability such as tracking desired references, robustness against uncertainties, rejecting the disturbances, and remote data estimation. The suggested control scheme is decentralized using adaptive observer to estimate the non-local varying parameters of the system. Stability of the closed loop system is proved mathematically using Lyapunov stability theorem. Performance of the proposed finite-time controller (FT-C) is compared to another suggested exponentially convergent nonlinear controller (ECN-C) and a conventional PI controller (PI-C). Settling time of the state variables are diminished to a known little time by FT-C in comparison with ECN-C and PI-C. Simulation results are given to validate the proposed controllers. Effects of model uncertainties such as parameter variation in the transmission line and the converters are studied and properly compensated by the proposed controllers. The impact of the control gain and the communication time-delay is shown using the Bode diagram analysis.
- انتشار مقاله: 22-08-1395
- نویسندگان: A. Mohammadpour Shotorbani,S. Ghassem Zadeh,B. Mohammadi-ivatloo,S. H. Hosseini,L. Wang
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Operation and Automation in Power Engineering
- نوع مقاله: Journal Article
- کلمات کلیدی: Hybrid Electric Vehicle,field oriented control,Dual mechanical port machine,Maximum torque per ampere,Flux weakening
- چکیده: ماشین الکتریکی با دو پورت مکانیکی در خودرو هیبرید الکتریکی به عنوان گیربکس متغیر پیوسته الکتریکی استفاده می شود. در خودروهای هیبرید الکتریکی، این ماشین جایگزین گیربکس و دو ماشین الکتریکی شده و ساختار خودرو ساده تر می گردد. در این مقاله کنترل برداری به روش جهت دهی میدان برای ماشین الکتریکی با دو پورت مکانیکی پیشنهاد شده است.
استراتژی کنترل پیشنهاد شده از الگوریتم ماکزیمم گشتاور به ازای جریان در سرعت های پایین و تضعیف شار در سرعت های بالا استفاده می کند. مدل ماشین الکتریکی با دو پورت مکانیکی با در نظر گرفتن کوپلاژ مغناطیسی بین دو فاصله هوایی در MATLAB/Simulink شبیه سازی شده و روش کنترل پیشنهادی به آن اعمال شده است. نتایج شبیه سازی با یک بررسی خلاصه در پایان ارائه شده است.- چکیده انگلیسی: A dual mechanical port machine (DMPM) is used as an electrically variable transmission (EVT) in hybrid electric vehicle (HEV). In the conventional HEV, this machine is replaced by a planetary gearbox and two electric machines and makes this structure simpler. This paper presents field oriented control (FOC) for DMPM. For HEV application, drive efficiency and wide operating speed range are important. The control strategy, which uses the maximum torque per ampere (MTPA) method at low speed and flux weakening (FW) method at high speed are proposed. The model of DMPM considering the magnetic coupling between two air gaps has been developed in MATLAB/Simulink and the proposed control strategy is applied to DMPM. The simulation results have been provided with a brief discussion at the end.
- انتشار مقاله: 30-05-1396
- نویسندگان: H. Afsharirad,M. B. B. Sharifian,M. Sabahi,S. H. Hosseini
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Operation and Automation in Power Engineering
- نوع مقاله: Journal Article
- کلمات کلیدی: Robust Control,Decentralized Control Lyapunov function,flexible AC transmission systems,Hybrid power flow controller,nonlinear control systems
- چکیده: در این مقاله، ساختار جدیدی برای اینورتر چند سطحی منبع جریان ارائه شده است که مناسب برای استفاده در ولتاژ پایین/متوسط میباشد. ساختار ارائه شده قادر است سطوح جریان دلخواه را در خروجی ایجاد نماید. همچنین، از مزایای ساختار پیشنهادی، قابلیت استفاده از منابع جریان DC متقارن یا نامتقارن میباشد. در حالت نامتقارن میتوان با انتخاب مناسب اندازه منابع ورودی، سطوح بیشتری در خروجی ایجاد کرد بدون آنکه ساختار مدار دچار تغییر شود. در نتیجه، در این مقاله چند روش برای محاسبه اندازه منابع جریان DC ورودی در حالت نامتقارن ارائه شده است. اینورتر پیشنهادی در مقایسه با اینورتر پل H (CHB)، دارای منابع جریان DC و کلیدهای نیمه هادی کمتری بوده و در نتیجه تعداد مدارات راه انداز نیز کاهش می یابد. استفاده از تعداد عناصر کمتر هم سبب کاهش هزینه و حجم مدار می گردد و هم سیستم کنترلی ساده تری را مورد نیاز خواهد بود. ویژگی دیگر ساختار ارائه شده، کاهش تلفات بدلیل کاهش تعداد کلیدهای در حالت روشن در هر لحظه میباشد. برای ارزیابی عملکرد ساختار پیشنهادی، شبیه سازی و نتایج عملی برای حالت های مختلف ارائه شده که نتایج صحت عملکرد ساختار پیشنهادی را نشان میدهند.
- چکیده انگلیسی: This paper investigates the robust decentralized nonlinear control of power flow in a power system using a new configuration of UPFC. This structure comprises two shunt converters and one series capacitor called as hybrid power flow controller (HPFC). A controller is designed via control Lyapunov function (CLF) and adaptive observer to surmount the problems of stability such as tracking desired references, robustness against uncertainties, rejecting the disturbances, and remote data estimation. The suggested control scheme is decentralized using adaptive observer to estimate the non-local varying parameters of the system. Stability of the closed loop system is proved mathematically using Lyapunov stability theorem. Performance of the proposed finite-time controller (FT-C) is compared to another suggested exponentially convergent nonlinear controller (ECN-C) and a conventional PI controller (PI-C). Settling time of the state variables are diminished to a known little time by FT-C in comparison with ECN-C and PI-C. Simulation results are given to validate the proposed controllers. Effects of model uncertainties such as parameter variation in the transmission line and the converters are studied and properly compensated by the proposed controllers. The impact of the control gain and the communication time-delay is shown using the Bode diagram analysis.
- انتشار مقاله: 22-08-1395
- نویسندگان: A. Mohammadpour Shotorbani,S. Ghassem Zadeh,B. Mohammadi-ivatloo,S. H. Hosseini,L. Wang
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Nanostructures
- نوع مقاله: Journal Article
- کلمات کلیدی: Chitosan,Antibiotic,Silica,Electrospinning,Nanofiber
- چکیده:
- چکیده انگلیسی: The biocompatible and biodegradable polymer nanofiber with high potential for anti-bacterial coating are used for: multi-functional membranes, tissue engineering, wound dressings, drug delivery, artificial organs, vascular grafts and etc. Electrospinning nanofiber made of scaffolding due to characteristics such as high surface to volume ratio, high porosity and very fine pores are used for a wide range of applications. In this study, polymer composite nanofiber Silica/chitosan/poly (ethylene oxide) /cefepime antibiotic synthesis and antibacterial properties will be discussed. The optimum conditions for preparation of electrospun nanofiber were: voltage; 21 kV, feed rate; 0.5 mL/h, nozzle-collector distance; 10 cm, and chitosan/poly(ethylene oxide) weight ratio 90:10 and the volume ratio of chitosan/silica is 70:30. The antibacterial activity of composite scaffolds were tested by agar plate method by two type bacteria including Escherichia coli and Staphylococcus aureus. With the addition of the silica to chitosan, the hybrid was more biodegradable and improves the mechanical properties of biopolymer.
- انتشار مقاله: 19-12-1394
- نویسندگان: A. Bagheri Pebdeni,M. Sadri,H. Hosseini
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Nanostructures
- نوع مقاله: Journal Article
- کلمات کلیدی: Composite,Y-Zeolite,2-Chloroethyl phenyl sulfide O,S-diethyl phenyl,Phosphonothioate
- چکیده:
- چکیده انگلیسی: In this work, zeolite NaY was prepared by hydrothermal method. Then, silver ions were replaced in the zeolite NaY with silver nitrate (AgNO3) solution via using ion exchange (IE) method. The Manganese dioxide (MnO2) nanoparticles (9.3 and 15.8 wt %) for guest were deposited in the zeolite AgY(host) structure with Mn(NO3)2 aqueous and KMnO4 solutions by confined space synthesis (CSS) method. Synthesized samples were studied and characterized via XRD, SEM/EDAX, FTIR, AAS and N2-BET techniques. The desulfurization and elimination reaction of 2- chloroethyl phenyl sulfide (2-CEPS) and DEPPT (O, S-diethyl phenyl phosphonothioate) have been investigated by 15.8 wt% Nano MnO2/Zeolite AgY composite and MnO2 nanoparticles catalysts and via GC, GC-MS and 31 PNMR.
- انتشار مقاله: 24-02-1393
- نویسندگان: M. Sadeghi,M. H. Hosseini
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Mining and Environment
- نوع مقاله: Journal Article
- کلمات کلیدی: Cracked Brazilian Disc (CBD),Stress Intensity Factor (SIF),Extended Finite Element Method (X-FEM),Mixed-Mode
- چکیده:
- چکیده انگلیسی: The cracked Brazilian disc (CBD) specimen is widely used in order to determine mode-I/II and mixed-mode fracture toughness of a rock medium. In this study, the stress intensity factor (SIF) on the crack-tip in this specimen is calculated for various geometrical crack conditions using the extended-finite element method (X-FEM). This method is based upon the finite element method (FEM). In this method, the crack is modeled independently from the mesh. The results obtained show that the dimensionless SIFs for the pure modes I and II increase with increase in the crack length but the angle in which pure mode-II occurs decreases. For the mixed-mode loading, with increase in the crack angle, NI value decreases, while NII value increases to a maximum value and then decreases. The results obtained from the crack propagation examinations show that the crack angle has an important effect on the crack initiation angle. The crack initiation angle increases with increase in the crack angle. When the crack angle is zero, then the crack is propagated along its initial direction, whereas in the mixed-mode cases, the crack deviates from the initial direction, and propagates in a direction (approximately) parallel to the direction of maximum compressive load.
- انتشار مقاله: 29-02-1393
- نویسندگان: M. Eftekhari,A. Baghbanan,H. Hashemolhosseini
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Mining and Environment
- نوع مقاله: Journal Article
- کلمات کلیدی: Cracked Brazilian Disc (CBD),Stress Intensity Factor (SIF),Extended Finite Element Method (X-FEM),Mixed-Mode
- چکیده:
- چکیده انگلیسی: The cracked Brazilian disc (CBD) specimen is widely used in order to determine mode-I/II and mixed-mode fracture toughness of a rock medium. In this study, the stress intensity factor (SIF) on the crack-tip in this specimen is calculated for various geometrical crack conditions using the extended-finite element method (X-FEM). This method is based upon the finite element method (FEM). In this method, the crack is modeled independently from the mesh. The results obtained show that the dimensionless SIFs for the pure modes I and II increase with increase in the crack length but the angle in which pure mode-II occurs decreases. For the mixed-mode loading, with increase in the crack angle, NI value decreases, while NII value increases to a maximum value and then decreases. The results obtained from the crack propagation examinations show that the crack angle has an important effect on the crack initiation angle. The crack initiation angle increases with increase in the crack angle. When the crack angle is zero, then the crack is propagated along its initial direction, whereas in the mixed-mode cases, the crack deviates from the initial direction, and propagates in a direction (approximately) parallel to the direction of maximum compressive load.
- انتشار مقاله: 29-02-1393
- نویسندگان: M. Eftekhari,A. Baghbanan,H. Hashemolhosseini
- مشاهده
- جایگاه : پژوهشی
- مجله: Journal of Linear and Topological Algebra
- نوع مقاله: Journal Article
- کلمات کلیدی: Best proximity point,(α, Θ)−ω-contractions,1/2−modular metric space
- چکیده:
- چکیده انگلیسی: In this paper, first we introduce the notion of $frac{1}{2}$-modular metric spaces and weak $(alpha,Theta)$-$omega$-contractions in this spaces and we establish some results of best proximity points. Finally, as consequences of these theorems, we derive best proximity point theorems in modular metric spaces endowed with a graph and in partially ordered metric spaces. We present an example to illustrate the usability of these theorems.
- انتشار مقاله: 27-07-1397
- نویسندگان: H. Hosseini,M. Eshaghi Gordji
- مشاهده