در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: Advances in Environmental Technology
- نوع مقاله: Journal Article
- کلمات کلیدی: Adsorption,activated carbon,Phenol,Co-pollutants,Isotherm and kinetic models
- چکیده:
- چکیده انگلیسی: Granular activated carbon (OSAC) which was derived from olive oil industrial solid waste was chemically activated with different concentrations of phosphoric acid. OSAC-materials were evaluated for their ability to remove phenol from aqueous solution in a batch technique. Adsorption isotherms were determined and modeled with five linear Langmuir forms, namely the Freundlich, Elovich, Temkin, Kiselev and Hill-de Boer models. The experimental data for the adsorption of phenol onto OSAM-materials were fitted well with the Langmuir-1 and 2, Freundlich, Kiselev and Hill-de Boer models. Adsorption was carried out on energetically different sites as localized monolayer adsorption and was an exothermic process. The uptake of phenol onto OSAC increased in the following order: OSAC-80%> OSAC-70%> OSAC-60%; the maximum adsorption capacities of phenol were found to be 114.416, 125.628 and 262.467 mg/g onto OSAC-60%, OSAC-70% and OSAC-80%, respectively. On the other hand, OSAC-80% was used as a good adsorbent for the removal of phenol and Cd2+ as co-pollutants from waste aqueous solutions. 80.25% of phenol and 50.66% of Cd2+ can be simultaneously removed by OSAC-80%.
- انتشار مقاله: 15-03-1396
- نویسندگان: Gehan Sharaf,Ezzat Abdel-Galil,Yasser El-eryan
- مشاهده
- جایگاه : پژوهشی
- مجله: Advances in Environmental Technology
- نوع مقاله: Journal Article
- کلمات کلیدی: Sorption,Cu(II),Zn(II),Ni(II),Physically activation Olive stone
- چکیده:
- چکیده انگلیسی: The performance of olive stone activated carbon (OSAC) for sorption of Cu2+, Zn2+ and Ni2+ ions was investigated via batch technique. OSAC materials were prepared under different physially activation conditions. Olive stone waste was physically activated with N2 gas and steam gas at 900oC at 3.5h hold time (OSAC-3) was choice as the best one for Cu2+, Zn2+ and Ni2+ removal. Characterization for OSAC-3 were performed under BET-surface area, SEM, density and FTIR-spectrum. Optimum adsorption conditions were specified as a function of agitation time, initial metal concentration, pH and temperature. Kinetic results were found to be fast and described well by the pseudo-second order model. The adsorption capacities are 25.38mg/g (Cu2+), 16.95mg/g (Zn2+) and 14.65mg/g (Ni2+) which followed the sequence Cu2+ > Zn2+ > Ni2+. Spontaneous adsorption for all the studied cations, endothermic nature for both Zn2+ and Ni2+ ions and exothermic nature for Cu2+ ions were obtained. The results showed that OSAC-3 is a good economical material for Cu2+, Zn2+ and Ni2+ remediation from weakly acidic contaminated effluents.
- انتشار مقاله: 26-03-1395
- نویسندگان: Gehan Sharaf,Gehan Sharaf,Gehan Sharaf
- مشاهده