در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: مدیریت صنعتی
- نوع مقاله: Journal Article
- کلمات کلیدی: تحلیل پوششی دادهها,رتبهبندی,قدرت تفکیکپذیری,توزیع وزنها
- چکیده: در چندین دهۀ گذشته تحلیل پوششی دادهها (DEA) بهعنوان تکنیکی برای ارزیابی عملکرد و اندازهگیری کارایی واحدهای تصمیمگیری (DMU)، بر اساس دادههای ورودی ـ خروجی آنها معرفی شد. با وجود این، نقصان و ضعف در قدرت تفکیکپذیری و عدم توزیع مناسب وزنها بهعنوان اشکالات عمده در DEA باقی ماندهاند. در ادبیات موضوع، مدلهایی برای حل این مشکلات ارائه شده است که این مدلها مشکلات دیگری از قبیل ناشدنی بودن دارند. در این مقاله با بهکار بردن یکی از معیارها از مدل DEA چندمعیاره (MCDEA)که در اواخر دهۀ 1990 میلادی توسعه یافت، اضافه کردن کرانی پایین برای وزنها و همچنین ارائۀ ابتکار و تکنیکی برای تفکیک و رتبهبندی همۀ واحدهای تصمیمگیری کارا، بهدنبال برطرف کردن مشکلات اشارهشده هستیم. برای تست و سنجش قابلیت متد پیشنهادی در مقابل مدلهای DEA موجود، به حل و تحلیل نتایج دو مثال عددی میپردازیم.
- چکیده انگلیسی: Data Envelopment Analysis (DEA) has been proposed as a performance evaluative technique to measure the relative efficiency of decision-making units (DMUs) based on their respective multiple inputs and outputs. Lack of great discrimination power and poor weight dispersion has remained as the major issues in DEA. Hence, several methods were addressed in the literature as strategies to resolve the stated problems. However, there are some drawbacks to these methods too, which may lead to infeasible solutions. In order to address these drawbacks sufficiently, we extended the deviation variable form of classical DEA model by adding the lower bound to the input-output weights i.e. multi-criteria data envelopment analysis (MUDEA) developed in the late 1990s and proposed a procedure for ranking efficient units based on the deviation variables values framework. We further illustrated the performance of our proposed method against the alternative methods based on two numerical examples.
- انتشار مقاله: 26-06-1396
- نویسندگان: محمدرضا قاسمی,آرش نبی زاده
- مشاهده
- جایگاه : پژوهشی
- مجله: محیط زیست و توسعه فرابخشی
- نوع مقاله: Journal Article
- کلمات کلیدی: پایداری,عملکرد زیست محیطی,صنعت سیمان
- چکیده: در عصر حاضر مقوله عملکرد زیستمحیطی شرکتها به عنوان یکی از اجزای اصلی اندازهگیری و سنجش پایداری شرکت مطرح است. بر اساس بروزترین اخبار و اطلاعات سازمان بهداشت جهانی، سلامت محیط زیست و به ویژه سلامت انسانها در شرایط بحرانی و خطرناک قرار دارد، با در نظر گرفتن این نکات هدف پژوهش حاضر بررسی تاثیر عملکرد زیست محیطی شرکتهای سیمان پذیرفته شده در بورس اوراق بهادار تهران، طی بازه زمانی 10 ساله 1387 تا 1396 میباشد. برای محاسبه متغیر عملکرد زیست محیطی شاخصها و مولفههایی تدوین گردیده که جهت کمی نمودن آنها از روش صفر و یک استفاده شده است. هم چنین تجزیه و تحلیل دادهها و آزمون فرضیه پژوهش با استفاده از روش نمودار به صورت مقایسهای انجام شده است. نتایج حاصل از پژوهش نشان داد که توجه به عملکرد زیست محیطی و پایبندی به شاخصهای آن در شرکت های سیمان نسبت به سایر صنایع از جایگاه خوبی برخوردار است.
- چکیده انگلیسی: Nowadays, environmental performance of companies is considered as one of the main components of measuring and measuring the sustainability of a company. According to the latest World Health Organization news and information, environmental health, and especially human health, is in critical and dangerous situations. During the 10-year period from 2010 to 2017. Indicators and components have been developed to calculate the environmental performance variable, using the method of zero and one to quantify them. Also, data analysis and testing of research hypotheses have been done using graphical comparative method. The results of the study showed that attention to environmental performance and adherence to its indicators in cement companies is better than other industries.
- انتشار مقاله: 29-04-1398
- نویسندگان: احمدرضا رفیعی شهرکی,محمدرضا قاسمی
- مشاهده
- جایگاه : پژوهشی
- مجله: منظر
- نوع مقاله: Journal Article
- کلمات کلیدی: اسلام,طبیعت,محیط زیست,شهر سنتی,اخلاق زیستی
- چکیده: بیتوجهی به حفاظت از طبیعت که عمدتا به علت عدم پشتوانه اخلاقی از سوی جوامع و مردم است و منجر به بحران محیطزیست شده، امروزه دچار تغییر نگرش در مواجهه با طبیعت و تدوین قوانین بینالمللی شده است و مذهب به مثابه محرکی جهت این تغییر نگرشها و تدوین کننده اخلاق، عاملی در رفع بحرانهای زیستی در نظر گرفته شده است. این پژوهش تلاش دارد تا در مبحث حاضر به بازشناسی مفهوم اخلاق در پرتو اندیشه و اصول اسلامی در فضای کالبدی بپردازد و راهبردهایی جهت بهره برداری مناسب از محیط زیست ارائه کند. روش پژوهش حاضر روش تحلیلی-توصیفی و روش نمونه موردی است که ابتدا روی مبانی نظری مدرن و دینی در زمینه برخورد کالبدی با شهر و معماری مورد مطالعه قرار گرفته است و در پژوهش موردی نیز با کاربست این چهارچوب، نمونههای شاهد را در شهر اسلامی به عنوان کالبد قابل اعتنا سنجیده و صحت سنجی میکند. بررسی ها حاکی از این واقعیت است که مبانی اسلامی از محیط زیست حمایت فرهنگی، دینی و اخلاقی همگانی کرده است و در زیستبومهای مختلف به روشهای متنوع، کالبد ویژه ارایه داده، بهگونه-ای که گاه سنت اسلامی با بکارگیری بیان نو، احترام به طبیعت را به تمامی نشان داده است. شهرهای سنتی مصداق آموزههای اسلامی است که بهترین شرایط محیط زیستی را برای انسان فراهم میکردند و در عین شرایط اقلیمی نامناسب از طبیعت در طراحی و ساخت شهر جهت ادامه حیات کمک می گرفته است.
- چکیده انگلیسی: Most of the damages to nature are brought about through negligence in putting living ethics into practice by city dwellers. This critical ignorance which is becoming a worldwide environmental crisis has put forward a change in attitude towards nature and its international constitutions and laws. In this regard, religious recommendations and regulations have been considered as significant influences through this change towards better living conditions. This research attempts to address the concept of morality in the light of Islamic thoughts and principles in physical space and provide strategies for proper exploitation of the environment. The method of this research is descriptive-analytic case study which first surveys modern religious theories with regard to the body of the desired cities and their architecture and then in case studies these theories are put into practice in order to provide a framework to study and verify these Islamic cities as significant samples. The studies show that the basic Islamic thoughts about environment have promoted universal, cultural, religious, and moral supports and have introduced a special framework in different environments, as is the case with the Islamic tradition by applying a new expression, to show the respect for nature in all possible aspects. Regardless of unfavorable climate changes, traditional cities in Iran are examples of Islamic teachings which provide the best environmental conditions for human beings in which nature is employed in designing and city architecture.
- انتشار مقاله: 12-10-1397
- نویسندگان: بهزاد وثیق,الهام زارع,محمدرضا قاسمی
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: تفنگ الکترونی,شتابدهندهی دینامیترون,نرمافزار سی اس تی استودیو
- چکیده: این مقاله طراحی تفنگ الکترونی گرمایونی با دو هندسهی متفاوت، کاتد مسطح و کاتد کروی را ارایه میدهد. هدف از انجام این پژوهش، پاسخ به این پرسش است که چه نوع تفنگ الکترونی برای شتابدهندههای الکترواستاتیک صنعتی مناسباند. در طراحی تفنگهای مورد نظر از نرمافزار سی اس تی استودیو استفاده شده است. مشخصههای مورد نظر در طراحی تفنگ گرمایونی مناسب، حداکثر جریان
mA 50 و ولتاژ 5 تا kV10 است که برای بهکارگیری در شتابدهندهی دینامیترون انتخاب شده است. جریان باریکه، شعاع کمر باریکه، مکان کمر باریکه و نفوذ تفنگ با کاتد مسطح و تفنگ با کاتد کروی به ترتیب 49 و 49.8 mA ، 3.2 و 0.45 mm ، 36 و 24.3mm ، 0.138 و 0.0498 μperv به دست آمد. از آنجایی که تفنگهای الکترونی که در صنایع به کار میروند، نفوذ بین 0.1 تا 1 μperv دارند بنابراین تفنگ الکترونی با کاتد مسطح با نفوذ µperv 0.138 مناسبتر است. از طرف دیگر ساخت آن آسانتر و کم هزینهتر است به همین دلیل تفنگ با کاتد مسطح انتخاب و ابعاد نهایی آن ارایه شده است.- چکیده انگلیسی: This paper presents the design of a thermionic electron gun with two different geometries, flat cathode and spherical cathode.The purpose of this research is to answer the question of which type of electron gun is suitable for industrial electrostatic accelerators. CST Studio software was used to design the guns. The desired specification in the design of a suitable thermionic gun, the maximum current of 50 milliamper and the voltage 5 to 10 kilovolt, is selected for use in the dynamitron accelerator. The beam current, the waist beam radius, the waist beam position and the perveance of a flat cathode gun and spherical cathode gun were 49 and 49.8 mA, 3.2 and 0.45 mm, 36 and 24.3mm, 0.138 and 0.0498 μperv, respectively. Since the electron guns used in the industry have a perveance between 0.1 to 1 μperv therefore, an electron gun with a flat cathode with 0.138 μperv is more suitable. On the other hand, it is easier and less costly to make it. That is why the gun with a flat cathode was chosen and its final dimensions are presented.
- انتشار مقاله: 06-11-1397
- نویسندگان: معصومه غلامی اکبرآباد,محمدرضا قاسمی,علی اصغر شکری,علیرضا گراییلی
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: آمونیوم اورانیل کربنات,اورانیل نیترات,آمونیوم کربنات,بهرهی رسوبدهی
- چکیده: آمونیوم اورانیل کربنات یکی از محصولات میانی در فرایند تبدیل کیک زرد به گاز هگزا فلوراید اورانیم است که با تزریق محلول آمونیوم کربنات به محلول اورانیل نیترات تولید میشود. بهرهی رسوبدهی آمونیوم اورانیل کربنات، مهمترین پارامتر این فرایند محسوب میشود، زیرا مورفولوژی و توزیع اندازهی ذرات پودر آمونیوم اورانیل کربنات تولیدی در این فرایند به علت تبدیل شدن به هگزا فلوراید اورانیم اهمیت چندانی ندارد. در این پژوهش، به صورت تجربی تمامی پارامترهای فرایندی اثرگذار بر بهرهی رسوبدهی آمونیوم اورانیل کربنات در این فرایند بررسی، تحلیل شده است. نتایج نشان داد که پارامترهای دبی محلول آمونیوم کربنات، زمان ماند، سرعت همزن، الگوی تزریق محلول آمونیوم کربنات، و دمای رسوبدهی تأثیر چندانی بر کارایی رسوبدهی ندارند. افزایش پارامترهای نسبت مولی آمونیوم کربنات به اورانیل نیترات، درصد وزنی محلول آمونیوم کربنات، و غلظت اورانیم محلول اورانیل نیترات، سبب افزایش بهرهی رسوبدهی میشود. همچنین افزایش نسبت مولی یونهای کربنات به آمونیوم در محلول آمونیوم کربنات سبب کاهش بهره میشود.
- چکیده انگلیسی: Ammonium uranyl carbonate (AUC), an intermediate material in the process of conversion of yellowcake to uranium hexafluoride, was produced by injection of an aqueous solution of ammonium carbonate (AC) into uranyl nitrate solution. The target parameter in optimization of this process was the yield of the precipitation, as morphology and size distribution of AUC play no role in its post processing to UF6. The aim of the current study was the experimental investigation of the effects of the process variables on the yield of AUC precipitation. The results showed that the flow rate and flow pattern of the injection of the AC solution, aging time, impeller speed, and temperature had little effects on the yield of AUC precipitation. On the other hand, the yield was increased by increasing the ammonium carbonate to uranyl nitrate molar ratio, ammonium carbonate concentration, and uranyl nitrate concentration. However, it decreased by increasing the molar ratio of CO32- to NH4+ ions in the ammonium carbonate solution.
- انتشار مقاله: 29-09-1395
- نویسندگان: محمد حسن صادقی,محمد اتوکش,محمدرضا قاسمی,امین زارعان
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: نانوذرات,طلا,تومور,ریز باریکههای پرتو ایکس,توزیع دز,کد Geant 4,گادولینیم
- چکیده: یکی از مهمترین شاخصههای کیفیت درمان در روش پرتودرمانی ریز باریکهای (MRT)، نسبت دز قله به دره (PVDR) است. این پارامتر، معیاری برای سنجش میزان نابودی سلولهای سرطانی و حفظ سلولهای سالم موجود در ناحیهی تومور و اطراف آن میباشد. هدف از این تحقیق، مطالعهی تأثیر استفاده از نانو ذرات طلا و گادولینیم به عنوان عامل فعالساز در توزیع دز و پارامتر PVDR میباشد که در آن، پرتودهی بافت موردنظر با ریزباریکههای صفحهای ایکس گسیلیده از سینکروترون مرکز تأسیسات تابش سینکروترون اروپایی (ESRF)، در نظر گرفته شده است. با استفاده از کد کامپیوتری Geant4، مدلی طراحی شد تا دز عمقی در فانتومی از جنس پلیمتیلمتاآکریلات (پرسپکس) (PMMA) خالص و توزیع دز در روشهای پرتودرمانی ریز باریکهای چند جهتهی درهم بافته (MIMRT) و پرتودرمانی ریز باریکهای دوجهتهی درهم بافته (BIMRT) در فانتوم حاوی تومورهای فرضی، شبیهسازی شود. مقایسه نتایج شبیهسازی دز عمقی در فانتوم خالص با نتایج اندازهگیری، بیانگر صحت شبیهسازی با استفاده از مدل طراحی شده میباشد. به منظور بهینهسازی روش پرتودرمانی ریز باریکهای، افزایش دز بافتهای سرطانی و حفاظت از بافتهای سالم در حضور عوامل فعالساز، مطالعه شده است. نتایج به دست آمده نشان میدهد که افزایش دز در ناحیهی قله با ذرات طلا و در ناحیهی دره با ذرات گادولینیم، قابلملاحظهتر میباشد. این نگرش، به کارگیری عوامل فعالساز در پرتودرمانی ریز باریکهای، ارایهی تدابیر جدید درمان و افزایش بازدهی درمان تومور را میسر میسازد.
- چکیده انگلیسی: One of the most important measures of therapeutic quality in Microbeam Radiation Therapy (MRT) is the Peak to Valley Dose Ratio (PVDR). This parameter is a criterion to evaluate ablation of cancerous cells and sparing of normal cells in tumor and in its surrounding region. The aim of this work is to study the influence of using gold and gadolinium nano-particles as contrast agents on dose distribution and PVDR when a phantom is irradiated by a typical micro-planar X-ray beam of European Synchrotron Radiation Facility (ESRF3). Using Geant4 computer code, a model has been designed to simulate depth dose in an intact phantom made of PMMA4 and dose distribution in a phantom containing assumed tumors in therapeutic techniques of MIMRT5 and BIMRT6. Comparison of simulated results in the intact phantom with the measured values of depth dose reveals the validity of our simulation with the designed model. To improve the efficiency of MRT, enhancement of absorbed dose in tumor tissues and sparing of normal tissues due to presence of contrast agents have been studied. The obtained results show that the enhancement is more noticeable for Au at the peak region and for Gd in the valley region. This approach of introducing contrast agents in MRT could hopefully prepare new treatment planning and improves the efficiency of tumor therapy.
- انتشار مقاله: 12-09-1387
- نویسندگان: محمدرضا قاسمی,مجتبی شمسایی زفرقندی,غلامرضا رئیس علی,محمد قنادی مراغه,ارژنگ شاهور,سید محمود محاطی
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: ایزوتوپهای تالیوم,جداکننده الکترومغناطیسی ایزوتوپها,چشمه یونی کالترون
- چکیده: در این گزارش چگونگی جداسازی تالیوم 203 به وسیلة دستگاه جداکنندة الکترومغناطیسی ایزوتوپها (EMIS)(1) و تصفیه شیمیایی آنشرح داده شده است. برای این منظور یودید تالیوم به عنوان مادّه اوّلیه انتخاب شده و در بوته گرافیتی چشمه یونی کالترون تحت خلاء Torr 5- 10 قرار گرفته است. یونهای تالیوم حاصل از یونی شدن بخار یودید تالیوم در این چشمه یونی، وارد میدان مغناطیسی 2547 گاوس شده و بر اساس اختلاف جرمشان مسیرهای متفاوتی را میپیمایند و درون پاکتهای مسی گردآوری میشوند. ایزوتوپ تالیوم 203 از پاکت مسی مربوط به خود، به وسیلة اسید نیتریک M 1 استخراج و فرایند تصفیه شیمیایی بر روی آن انجام میشود. درجة خلوص شیمیایی و ایزوتوپی تالیوم 203 به ترتیب به وسیلة طیفسنجهای نشری و جرمی تعیین شدهاند. ایزوتوپ تالیوم 203 بدست آمده دارای درجة خلوص ایزوتوپی 95.91% است. تشکیل پودر تری اکسید تالیوم 203 نیز به وسیلة پراش اشعه X مورد تأیید قرار گرفته است.
- چکیده انگلیسی: Separation of thallium isotopes (203Tl , 205Tl ) have been carried out by a 180º electromagnetic isotope separator. Thallium iodide as the charge material is used in a graphite crucible of calutron ion source. Under the pressure of 1 × 10-5 torr, thallium ions are extracted, accelerated and focused by the electrical lenses. The ions then traverse the main vacuum tank in circular paths, entering the magnetic field of 2547 Gauss and finally reach the collector. A number of chemical procedures have been employed for recovery and purification of the collected ions from the copper pockets. The final isotopic products have been characterized by a x-ray diffractometer, inductively coupled plasma-atomic emission spectrometer (ICP-AES) and a mass spectrometer. High pure thallium trioxide (Tl203 ) with 95.91% isotopic abundance for 203Tl has been confirmed.
- انتشار مقاله: 17-07-1380
- نویسندگان: عبدالجواد نوین روز,هوشنگ بختیاری,پروین سرآبادانی,حسین صدری,ضرغام اسداللهی,هوشیار سیدی,محمدرضا قاسمی,محمود محاطی,معصومه شربتداران,محمدمهدی احسانی,حسن نورکجوری,جواد گروسی,بابک زینلی
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: نیروگاه خورشیدی,هیدرولیک,حسگر نوری,ردیاب خورشیدی
- چکیده: در این کار پژوهشی یک دستگاه ردیاب خورشیدی، مشتمل بر دو جزء اپتیکی - الکترونیکی و هیدرولیکی، برای نیروگاه گرما برقی خورشیدی طرّاحی و ساخته شده است. اجزای این دستگاه، شامل حسگرهای(1) نوری، مدارهای الکترونیکی، کنترل کنندة رایانهای و محرّک مکانیکی بوده و سازوکار عملکرد آنها تشریح شدهاند. دستهای از پرتوهای خورشیدی موازی با محور اصلی آینة شلجمی شکلی که دارای فاصلة کانونی cm170 و طول cm400 و قطر دهانه cm570 است، بر سطح این آینه میتابد و پس از بازتابش در کانون آن متمرکز میشود، ولی پرتوهای غیر موازی منحرف میگردند. معادلات مسیر پرتوها در فضای سه بعدی، به وسیلة برنامهریزی کامپیوتری به زبان C، با در نظر گرفتن زاویة خطای تابش پرتوها بر آینه از صفر تا 0.5 درجه حل شده است، به طوری که میتوان معیاری برای بیشینة خطای مجاز تابش پرتوهای خورشید بر آینه را بدست آورد. حسگرهای نوری، انحراف پرتوها از محور اصلی آینه را با دقّت 0.1 درجه شناسایی و فرمانهای لازم برای تصحیح را به سیستم محرّک مکانیکی از نوع هیدرولیکی، انتقال میدهد. یک موتور الکتریکی سه فاز با توان kW 0.7 و هزار دور در دقیقه حرکت آینه را تأمین میکند.
- چکیده انگلیسی: A sun tracker system, consists of two parts (opto-electronic and hydraulic), has been designed and fabricated to be used in solar thermal power plant. In this paper various parts of the system including optical sensors, electronic circuits, computational control and mechanical lever have been explained and the operational mechanism of each one is discussed. The parabolic mirror used in this plant has 400 cm length, 570 cm width and 170 cm focal length. Rays falling parallel to the axis of mirror are reflected and collected at the focal point, while unparallel rays are diverted. To determine the rate of divergence, a three – dimensional equation of radiation path is written. Using a computational program in “C” language the error is calculated from “0” to “0.5” degree, for modifying the operational error of the optical system. The optical sensors detect the beam deviation from the mirror,s principal axis with a precision of 0.1 degree and transfer the necessary corrections to the active mechanical system of the hydraulic type. A three phase electromotor of 0.7 kW power and one thousand revolutions per minute controls the mirror movement.
- انتشار مقاله: 13-09-1380
- نویسندگان: عبدالجواد نوین روز,محمدرضا قاسمی,سیدمحمود محاطی,حسین صدری
- مشاهده
- جایگاه : پژوهشی
- مجله: Iranian Journal of Geophysics
- نوع مقاله: Journal Article
- کلمات کلیدی: گسل درونه,رودخانه ششتراز,لومینسانس برانگیخته شده با نور (OSL),نرخلغزش
- چکیده: گسل درونه در شمالشرق ایران، از گسلهایی است که با وجود طویل بودن، قرارگیری در محل همگرایی دو صفحه عربستان-اوراسیا و دارا بودن پتانسیل بالای لرزهخیزی، فقط یک زمینلرزه تاریخی با بزرگای 7 (زمینلرزه 1619، دوغ آباد (آمبرسیز و ملویل، 1982)) و دو زمینلرزه دستگاهی با بزرگای بیش از حدود 6 (زمینلرزههای 1933 با بزرگای 6 و 1940 با بزرگای 5/6، در حوالی این گسل (چالنکو و همکاران، 1973)) داشته است؛ بنابراین، تحلیلخطرلرزهای روی این گسل ضروری است. یکی از روشهای تحلیلخطر در یک منطقه، محاسبه نرخلغزش است. از بهترین روشهای تعیین نرخلغزش، استفاده از سنیابی رسوبات، با بهکارگیری لومینسانس (لومینسانس) برانگیختهشده با نور (OSL) است. در این بررسی، نرخدُزمعادلدُزطبیعی (De) ذرات کوارتز و فلدسپار نمونههای برداشتشده از منطقه ششتراز، با تحلیل دادهها در برنامه Analyst به روش هیستوگرام (هیستوگرام) محاسبه شد. با توجه به آنکه در رسوبات منطقه، احتمال صفر نشدن کامل سیگنالهای لومینسانس نمونهها وجود دارد، نتایج حاصل به روش حداقل سن نیز محاسبه شد. با استفاده از مقادیر De، سن ذرات کوارتز نمونههای T1، T1a و T2، به روش حداقل سن بهترتیب 75/0±49/3 و 95/0 ± 67/7 و 34/1±57/4 هزار سال و به روش هیستوگرام، بهترتیب 15/3±88/3 و 5/10±99/10 و 45/4±99/7 هزار سال برآورد شد و سن ذرات فلدسپار این نمونهها نیز، به روش حداقل سن، بهترتیب 48/0±23/6 و 23/2±40/7 و 25/0±96/4 هزار سال و به روش هیستوگرام، بهترتیب 22/1±61/7 و 79/1±40/9 و 43/2±07/8 هزار سال برآورد شد. با استفاده از جابهجاییهای اندازهگیریشده طی عملیات صحرایی در منطقه ششتراز، بر پایه دادههای ذرات کوارتز و فلدسپار، نرخلغزش ذرات کوارتز نمونهها T1، T1a و T2، به روش حداقل سن بهترتیب 39/1±30/6 و 43/0±26/3 و 56/0±75/1 میلیمتر بر سال و به روش هیستوگرام، بهترتیب 61/4±67/5 و 18/2±28/2 و 57/0±1 میلیمتر بر سال برآورد شد و نرخلغزش ذرات فلدسپار این نمونهها، به روش حداقل سن بهترتیب 31/0±53/3 و 03/1±38/3 و 22/0±61/1 میلیمتر بر سال و به روش هیستوگرام، بهترتیب 48/0±89/2 و 52/0±66/2 و 32/0±99/0 میلیمتر بر سال برآورد شد. مقایسه سیگنال درخشایی (لومینانس) ذرات کوارتز و فلدسپار روشن ساخت که سنهای بهدست آمده از ذرات فلدسپار، قابل قبولتر از ذرات کوارتز است. محدوده نرخلغزشهای بهدست آمده در تحقیق حاضر، وسیعتر از محدوده بهدست آمده در تحقیقات قبلی است، لذا تحقیقات بیشتر، ضرورت دارد.
- چکیده انگلیسی: Having a left lateral strike slip, the Doruneh fault is located in the northeast of Iran. It is thesecond longest fault system (~700 km), after the Main Zagros Recent Fault system, in Iran. This fault is the response of the convergence between the Arabian and Eurasian plates in the regional tectonic map. Despite high potential seismicity, only two historical earthquakes with magnitudes greater than 7 more than, and no instrumental earthquakes with greater than 6, have been recorded for this fault. Therefore, it is necessary to determine the hazard of this fault in the area. One way to conduct the Earthquake Hazard Assessment is to calculate the slip rate, and one method for calculating the slip rate is measuring the displacement by the fault and dividing it by the period during which this displacement has occurred. Optically Stimulated Luminescence (OSL) is one of the best methods for determining sediment age in arid and semi-arid zones such as Iran. Displacements of quaternary geological evidence (e.g., river beds) by the Doruneh fault also suggest this fault is active. In this study, the Shesh-Taraz area was selected because it is near populated areas, including Kashmar, Bardaskan, Khalilabd, Ali mardankhan, and Chenar. Fattahi et al. (2006) collected Optically Stimulated Luminescence (OSL) samples from the Shesh-Taraz and employed the weighted mean Infrared Stimulated Luminescence (IRSL) from the feldspar for slip rate determination. This investigation used similar samples but calculated the ages of both quartz and feldspar fragments using a different OSL method. The samples were processed under subdued red light. A portion of the sample was taken by dry and wet sieving. The quartz and feldspar fragments were purified and separated by chemical treatment. The separated quartz and feldspar were mounted as monolayers on the 10 mm diameter Al discs for the single aliquot analysis using a silicon spray as an adhesive. The Equivalent Doses (De) of quartz and feldspar of each sample were calculated using the Minimum Age and Histogram Methods for which the Analyst program was used. By dividing the calculated Equivalent Dose by the Total Dose Rate, the ages of these samples were calculated. The estimated ages for T1, T1a and T2, from the quartz samples using the Minimum Age Method were 3.49±0.75, 7.67±0.95, and 4.57±1.34 ka, respectively, and employing the Histogram Method were 3.88±3.15, 10.99±10.5, and 7.99±4.45 ka, respectively. The estimated ages for the feldspar samples with the Minimum Age Method were 6.23±0.48, 7.40±2.23, and 4.96±0.25 ka, respectively, and with the Histogram Method were 7.61±1.22, 9.40±1.79, and 8.07±2.43 thousand years, respectively. The displacement of geomorphologic evidence was measured by satellite images (Landsat and Quick Bird Image). Because of high accuracy of the field-measured displacement, in comparison to the satellite image displacement measurements, we calculated the slip rate by dividing the values calculated using the former method of displacement by OSL ages into the newly estimated ages. The estimated slip rates for T1, T1a and T2, using quartz samples with the Minimum Age Method were 6.30±1.39, 3.26±0.43, and 1.75 ±0.56 mm.yr-1, respectively, and with the Histogram Method were 5.67 ±4.61, 2.28±2.18, and 1±0.57mm.yr-1, respectively. The estimated slip rates for T1, T1a and T2, using the feldspar samples with the Minimum Age Method were 3.53±0.31, 3.38±1.03, and 1.61±0.22 mm.yr-1, respectively, and with the Histogram Method were 2.89 ±0.48, 2.66 ±0.52, and 0.99 ±0.32 mm.yr-1, respectively. Comparative studies of the luminescence signals of quartz and feldspar showed that the results of feldspar are more reliable. The range of the slip rates calculated in this study includes the range of slip rates determined by previous studies. Therefore, additional studies in this region are required.
- انتشار مقاله: 20-09-1395
- نویسندگان: حمیده امینی,مرتضی فتاحی,محمدرضا قاسمی
- مشاهده
- جایگاه : پژوهشی
- مجله: فصلنامه محیط زیست جانوری
- نوع مقاله: Journal Article
- کلمات کلیدی: ارزش اقتصادی,نوغانداری,هیبرید تجاری داخلی,هیبرید تجاری وارداتی
- چکیده: پژوهش حاضر به منظور مقایسه توان تولیدی شش هیبرید تجاری داخلی با چهارده هیبرید تجاری وارداتی در مرکز تحقیقات ابریشم کشور انجام گردید. در این بررسی 3 تکرار به میزان نیم گرم از هر جعبه تخم نوغان از ابتدای خروج تخم از سردخانه توزین در پاکت های مخصوص تفریخ قرار داده شد. این آزمایش در قالب طرح کاملا تصادفی انجام گرفت و دادهها تحت برنامه Graphpad Prism و Minitab تجزیه و تحلیل شدند. به منظور آنالیز تجزیه واریانس از روش ANOVA و برای مقایسه میانگین از روش آزمون Tukey استفاده گردید. بر طبق نتایج هیبریدهای 871*872 و 104*103 با حدود 98/5 درصد تفریخ در تخم ها بهترین هیبریدهای جمعیتی بودند (0/05>p ). وزن کل پیله استحصالی در هیبریدهای Q*B با 9/667 و L*OR و QA*BB با 663 گرم در گروه برتر قرار داشتند (0/05>p ). هم چنین نتایج نشان داد که اختلاف وزن متوسط قشر ابریشمی در هیبریدهای 872*871، 154*153، S*M و 103*104 در گروه، افزایش معنی داری را داشتند (0/05>p ). در مورد صفت تولید پیله به ازای ده هزار لارو هیبریدهای 154*153، 872*871وS*M، به ترتیب بهترین تولید پیله را دارا بودند (0/05>p ). در ویژگی تعداد پیله در لیتر هیبریدهای S*M و 872*871 با کم ترین تعداد پیله در یک لیتر به عنوان بهترین گروه در این صفت بودند. نتیجه گیری کلی از این تحقیق نشان می دهد که هیبریدهای داخلی در بسیاری از صفات اقتصادی مطرح در زمینه پرورش کرم ابریشم همسطح و یا بهتر از هیبریدهای وارداتی بوده و می توان از آن ها به عنوان جایگزین مناسبی در این صنعت در ایران استفاده نمود.
- چکیده انگلیسی: The present study was conducted by comparing the production capacity of six domestic commercial hybrids with 14 imported commercial. In this study, 3 replications included half gram from the beginning of egg hatching were placed in hatchery envelopes. Considering the same breeding site, the best commercial hybrids in terms of yield can be identified and introduced. This experiment was conducted in a completely randomized design and data under Graphpad Prism and Minitab were analyzed. The analyses were performed using ANOVA and differences between means were examined using the Tukey test. According to the results, 872*871 and 103*104 hybrids were the best population hybrids with about 98.5% hatching (p < 0.05). The total weight of the cocoon obtained in hybrids with Q*B 9/667 and L*OR and QA*BB with 663 grams were in the top group (p < 0.05). The results showed that the average cocoon shell weight in hybrids 872*871, 154*153, S*M and 103*104 in the group, had a significant increase (p < 0.05). In the case of cocoon production for 10,000 larvae, 153*153, 872*871 and S*M hybrids had the best cocoon production, respectively (p < 0.05). Specifically, the number of cocoons per liter was S*M and 872*871 hybrids with the lowest number of cocoons per liter as the best group in this trait. The overall conclusion of this study shows that domestic hybrids in many economic traits in silkworm breeding are or better than imported hybrids and can be used as a suitable alternative in this industry in Iran.
- انتشار مقاله: 12-12-1398
- نویسندگان: محمدرضا بیابانی,علی خضریان,یوسف خیرخواه رحیم آباد,فتح اله شهبازی,سیده خیرالنسا طیب نعیمی,رضا صورتی زنجانی,بیژنگ جلوه زیده سرائی,علیرضا صیداوی,محمدرضا پورقاسمی
- مشاهده