در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: مدیریت آب در کشاورزی
- نوع مقاله: Journal Article
- کلمات کلیدی: تشت تبخیر,میکرولایسیمتر,تبخیرتعرق
- چکیده: در تمام روشهایی که توسط آنها تبخیر-تعرق گیاه مرجع محاسبه میشود برای آنکه بتوان نتایج حاصله را به سطوح پوشش گیاهی مورد نظر تعمیم داد لازم است مقادیر به دست آمده را در ضریب گیاهی ضرب نمود. بهمنظور برآورد میزان ضریب گیاهی گل مغربی، آزمایشی با 4 تکرار، به مدت 70 روز در فروردین سال 1397 در محیط ایستگاه هواشناسی دانشکدهی کشاورزی دانشگاه فردوسی مشهد انجام شد. به این منظور گیاهان در گلدانهایی پلاستیکی به رنگ سفید (میکرولایسیمتر) با قطر دهانه 30 سانتیمتر و ارتفاع 50 سانتیمتر کشت شدند. میزان آب موردنیاز برای تأمین نیاز آبی گیاهان بر اساس ظرفیت زراعی انجام گردید. با کنترل بیلان آبی در گلدانها، تبخیر-تعرق گیاهان اندازهگیری شد و با استفاده از دادههای تشت تبخیر کلاس A میزان ضریب گیاهی محاسبه شد. بر اساس نتایج این مطالعه، ضریب گیاهی گلمغربی در مراحل ابتدایی، میانی و پایانی به ترتیب برابر با 75/0، 05/1 و 00/1 به دست آمد و متوسط آن در کل دوره رشد گلمغربی برابر با 92/0 بود. مقدار کل تبخیر-تعرق گیاه نیز حدود 377 میلیمتر برآورد شد.
- چکیده انگلیسی: . In all methods in which the evapotranspiration of plants is counted as a reference, in order to generalize the results to the vegetation, it is necessary to multiply the acquired amount to the crop coefficient. An experiment was done to estimate the crop coefficient amount of evening primrose that was repeated four times in a time period of 70 days on March 2018.[D1], in a weather station located in the agriculture college of Ferdowsi University of Mashhad. In this experiment, the plants were cultivated in white plastic pots (micro-lysimeter) by 50 centimetre height and 30 centimeter width. The demanded amount of water to provide the plants' water needs is considered based on the field capacity. By controlling the water balance in pots, the evapotranspiration of plants was measure and by the use of evaporation pan A data, the crop coefficient was calculated. According to the results of this study the crop coefficient of evening primrose in the initial, middle and final steps are 0.75, 1.05 and 1.00 respectfully. The average in whole the period evening primrose growth was 0.92. The total amount of evapotranspiration of plants was estimated to be about 377 millimeters.
- انتشار مقاله: 31-01-1400
- نویسندگان: اعظم غلامزاده,حسین انصاری,سید مجید هاشمی نیا,مجید عزیزی
- مشاهده
- جایگاه : پژوهشی
- مجله: مجله صنایع چوب و کاغذ ایران
- نوع مقاله: Journal Article
- کلمات کلیدی: تحلیل سلسله مراتبی,توسکا,صنوبر,کاج تدا,محصول بهینه و بازار هدف
- چکیده: بیست و هفت درصد از جنگل های استان گیلان با مساحت حدود 150 هزار هکتار تحت پوشش شرکت سهامی جنگل شفارود است که تاکنون در چارچوب 73 طرح جنگلداری از آن بهره برداری شده است. از طرفی با توجه به شرایط اکولوژیکی منطقه، گونه های قابل کاشت، ظرفیت و توانایی شرکت جنگل شفارود، سه گونه صنوبر، توسکا و کاج تدا جهت تعیین محصول بهینه، شناسایی بازارهای هدف و درنهایت اولویت بندی جهت سرمایه گذاری آتی به منظور طرح های زراعت چوب و مدیریت پایدار جنگل مورد بررسی قرار گرفت. برای این منظور پس از مطالعات و بررسی پژوهش های انجام شده و مصاحبه با کارشناسان متخصص، شاخص های موثر برروی تعیین محصول بهینه و بازارهای هدف به 6 گروه اصلی و 49 زیر شاخص تقسیم شدند. درجه اهمیت شاخص ها و زیر شاخص ها پس از اخذ آرای کارشناسان با بکارگیری فرآیند تحلیل سلسله مراتبی تعیین شد. نتایج نشان داد که گونه های کاج تدا (470/0)، توسکا (299/0) و صنوبر (230/0) به ترتیب دارای بیشترین اهمیت می باشند و بر این اساس جهت زراعت چوب و سایر طرح های جنگلداری پیشنهاد می شوند. در میان شاخص های سطح اصلی (صنایع مصرف کننده چوب)، صنایع خمیر و کاغذ، مبلمان، فرآوردههای چوبی، ساختمان، لوازم و ابزار و حمل و نقل به ترتیب دارای بالاترین ارزش وزنی بودند. از میان زیر شاخص ها (محصولات) دستمال کاغذی نسبت به سایر محصولات دارای بالاترین اولویت بوده و پس از آن مبلمان اداری، راحتی و استیل و نیمه استیل به ترتیب بالاترین اولویت ها را به خود اختصاص دادند.
- چکیده انگلیسی: 27 percentage of Gilan province (North of Iran) with approximately 150 thousand hectares is under cover of Shafaroud Forest Company which is utilized in form of 73 forestry plans. Regarding to ecological futures of the region, promising species and the Shafaroud's potential, three species containing Poplar, Alder and Loblolly-pine were investigated to determine optimal product and target markets. Finally they were categorized for future investments on forestry plans and sustainable forest management. For these purposes, after review of previous studies and some interviews with experts, effective factors on determining optimal product and target markets divided into 6 main categories and 49 subcategories. Sorting of categories and subcategories was conducted by Analytical Hierarchy Process (AHP) and according to experts comments. The result showed that Loblolly-pine (0.470), Alder (0.299) and Poplar (0.230) had more importance, respectively and accordingly they propose for wood farming and forestry plans in this order. Among main categories, pulp and paper, furniture, wood products, building, accessories and tools, and transportation were sorted according to their relative weight. In case of subcategories, tissue was the most important product and furniture (both office and home furniture) took place in next ranks.
- انتشار مقاله: 26-08-1397
- نویسندگان: سید بهنام حسینی,مجید عزیزی,مهدی کلاگر,مهدی مرادی پور
- مشاهده
- جایگاه : پژوهشی
- مجله: مجله صنایع چوب و کاغذ ایران
- نوع مقاله: Journal Article
- کلمات کلیدی: خواص فیزیکی,پلیلاکتیکاسید,زیست تخریب-پذیر,آرد بامبو,دوام زیستی
- چکیده: این مطالعه به ارزیابی زیستتخریبپذیر بودن چندسازهی ساختهشده از آرد ساقهی گیاه بامبو و پلیلاکتیکاسید با استفاده از آزمون ویژگیهای فیزیکی و دوام زیستی میپردازد. از سوی دیگر، تأثیر مقدار و اندازهی ذرات آرد ساقهی گیاه بامبو بر ویژگیهای فیزیکی و دوام زیستی چندسازهی ساختهشده، از دیگر اهداف تحقیق حاضر بود. ازاینرو، ابتدا ذرات آرد ساقهی گیاه بامبو و پلی-لاکتیکاسید در دستگاه اکسترودر دوماردون ناهمسوگرد باهم مخلوط و سپس به روش قالبگیری فشاری تختههای حاصله ساخته شدند. آنگاه نمونههای ساختهشده بر اساس شرایط تدوینشده در استاندارهای ASTM و113 EN- مورد ارزیابی قرار گرفتند. نتایج مشخص نمود که با افزایش مقدار و اندازه ذرات آرد بامبو واکشیدگی ضخامت و جذب آب چندسازه به شکل معناداری افزایش مییابد. همچنین آزمون دوام زیستی چندسازه در برابر قارچهای عامل پوسیدگی نشان داد که با افزایش مقدار آرد بامبو میزان تخریب چندسازه بهویژه در برابر قارچ عامل پوسیدگی قهوهای بهشدت افزایش یافت. این در حالی بود که پلیلاکتیکاسید خالص در برابر قارچها دوام بسیار بالایی داشت.
- چکیده انگلیسی: The purpose of this study was to evaluate the biodegradability of composites made from bamboo flour and poly lactic acid using physical properties and biodurability examinations. On the other hand, the effect of the amount and size of the bamboo flour particles on the physical properties and durability of the biocomposites was another objective of the research. the bamboo flour and polymer were mixed up in a counter-rotating twin screw extruder. the biocomposites boards were produced by compression molding method. The samples were cut and evaluated according to the suggested specifications in the ASTM and EN-113 standards. The results showed that the thickness swelling and water absorption of the composites were increased significantly by increasing the amount and size of bamboo flour particles. Also, biodurability of the biocomposites samples against the studied three fungi species showed that Gloeophyllum trabeum sharply caused high mass losses in all samples by increasing the amount of bamboo flour, while pure polymer (PLA) had a very high durability against the fungi.
- انتشار مقاله: 11-11-1396
- نویسندگان: معین دهقان,مهدی فائزی پور,مجید عزیزی,احسان باری
- مشاهده
- جایگاه : پژوهشی
- مجله: مجله صنایع چوب و کاغذ ایران
- نوع مقاله: Journal Article
- کلمات کلیدی: فرایند تحلیل سلسله مراتبی,تولید پایدار,تولید پاک تر,صنایع کاغذ سازی,شاخص و زیرشاخص
- چکیده: فرایند تولید پاک تر ، یک رویکرد دوستدار محیط زیست محسوب می شود که سعی دارد با کاهش ضایعات و مصرف انرژی و .. آلودگی های زیست محیطی فرایندهای صنعتی راکاهش دهد تا امکان تولید پایدار را در واحدهای صنعتی فراهم نماید. برای نیل به این هدف صنایع کاغذسازی نیز باید کاهش ضایعات فرایندهای تولید و مصرف بی رویه انرژی را در همسویی با استراتژی های تولید پاک تر در اولویت برنامه های خود قرار دهند. در این تحقیق فرایند تحلیل سلسله مراتبی بکار گرفته شده و یک سلسله مراتب با سه سطح برای تسهیل فرایند اولویت بندی تولید پاکتر در کارخانه کاغذ لطیف ساختار دهی شده است. با مرور ادبیات و مطالعات میدانی مدل پیشنهادی، برای پیاده سازی تولید پاکتر در کارخانه فراهم گردید. نتایج تحقیق نشان داد شاخص های اصلی تولید پاک تر به ترتیب اولویت تغییر فرایند، اصلاح محصول، اجرای نظام تعمیر و نگهداری پیشگیرانه ، بازگردانی و سرمایه های انسانی می باشند. شاخص تغییر فرایند با اختصاص میزان 40 درصد از کل اهمیت بالاترین اولویت را در اجرای راهبردی تولید پاک تر به خود اختصاص داد. زیرشاخص وجود اتوماسیون صنعتی و سطح تکنولوژی آن که از زیرشاخص های تغییر فرایند میباشد بالاترین اولویت را در بین 31 زیرشاخص دارد. همچنین زیر شاخص های با اولویت بالاتر مانند استفاده از آخال با کیفیت و اجرای نظام کالیبراسیون نیز به شاخص تغییر فرایند ارتباط دارند. لذا برای دستیابی به اهداف تولید پاک تر و اجرای راهبردی آن توجه بیشتر به این شاخص لازم است . نرخ ناسازگاری کلی در این بررسی 06/0 می باشد که دلالت بر ثبات نتایج بدست آمده دارد. نتایج این تحقیق می تواند در تسریع اجرای فرایند تولید پاک تر در صنعت خمیر و کاغذ ایران مورد استفاده قرار گیرد.
- چکیده انگلیسی: Cleaner production process is an environmentally friendly approach that attempts to reduce waste and energy consumption then reduce environmental pollutions of industrial processes to provide the possibility of sustainable production in industrial units. To achieve this goal and alignment with cleaner production strategies, paper industries should consider reducing wastes of production processes and irregular consumption of energy as a priority in their programs. In this research Analytic Hierarchy Process has been applied and a three level hierarchy model was structured to facilitate the cleaner production process in Latif paper products firm. Using a literature review and field study, the proposed model provided a framework for cleaner production implementation in the firm. Results showed priorities of the main criteria of cleaner production are process change, product modification, implementation of preventive maintenance system, resititution and man force capitals respectively. Process change criterion allocated 40 percent of the total weighing value and has the highest priority in implementation of cleaner production strategy. Existence of industrial automation and its technology level which is a sub criterion of process change has the highest priority among 31 sub criteria. Also some of higher priority sub criteria such as use of higher quality inclusion and implementation of calibration system are related to process change. Therefore, to achieve cleaner production goals and implementation of its strategic objectives it is necessary to pay more attention to this criterion. Inconsistency ratio of the research is 0.06 which indicates the results are compatible. The results of this research can be used to accelerate the implementation of cleaner production process in Iran’s pulp and paper industry.
- انتشار مقاله: 28-11-1395
- نویسندگان: یعقوب اسدی زاده,مجید عزیزی,یحیی همزه
- مشاهده
- جایگاه : پژوهشی
- مجله: مجله صنایع چوب و کاغذ ایران
- نوع مقاله: Journal Article
- کلمات کلیدی: چالش,واردات,شاخص,فرایند تحلیل سلسله مراتبی دلفی فازی,زیر شاخص
- چکیده: چکیده
با توجه به سیر صعودی مصرف چوب و فرآوردههای آن در کشور و منابع ثابت و محدود داخلی، کمبود این ماده اولیه در کشور، واردات چوب راه حلی پرهیزناپذیر برای تأمین نیازهای صنایع روبه گسترش چوبی میباشد. درحالیکه واردات چوب خام به کشور ایران همواره با چالشهای متعددی رو به رو است. از اینرو هدف از این مطالعه تعیین و رتبهبندی چالشهای موجود در واردات چوب به ایران میباشد. روش تحقیق مورد استفاده در این پژوهش توصیفی -تحلیلی است، همچنین روش تحلیلی به کارگرفته شده در این مقاله به منظور اولویت بندی چالشهای اساسی موجود در وارادت روش تحلیل سلسله مراتبی دلفی فازی است. برای این منظور با مطالعات و بررسی پژوهشهای انجام شده و مصاحبه با صاحبان صنایع چوب چالشهای موجود در واردات چوب ایران به5 گروه اصلی و 35 زیر شاخص تقسیم شدند. نتایج نشان داد که در میان شاخصهای سطح اصلی، شاخصهای قانونی، اقتصادی، سیاسی ، زیر ساخت ومدیریت به ترتیب دارای بالاترین ارزش وزنی میباشند.همچنین زیر شاخص مشکلات قانون حفظ نباتات نسبت به سایر زیر شاخصها دارای بالاترین اولویت بوده و بعد از آن زیر شاخصهای نوسانات نرخ ارز، درآمدهای نفتی، حمایتهای بانکی،تولید ناخالص، به ترتیب بالاترین اولویتها را به خود اختصاص داده-اند.- چکیده انگلیسی: Abstract:
Considering the increasing consumption of wood and wood products in Iran and limited domestic sources of wood and shortage of wood raw material in Iran, wood raw material imports is a solution for Iranian developing wood industries' wood procurement.
But, wood imports to Iran, always faced with a lot of challenges. The aim of this research is to determine and evaluate the challenges in the way of wood imports to Iran. The research method used in this study is a descriptive-analytic method. The analytic method used in the study to evaluate the challenges is the Fuzzy Delphi Analytical Hierarchy Process (FDAHP). First the findings of previous researches in the field and the literature were studied and doing interviews with industry experts, the challenges in the way of wood imports to Iran were extracted and classified in 5 groups and 35 factors and were evaluated.
The results shows that in the first level (groups) the regulation, economic, politic, infrastructure and management groups have the most importance respectively. In second level (challenges), plant protection regulations have the most importance. After that, exchange rate tolerance, oil income, banking support and GDP have most importance respectively.- انتشار مقاله: 23-05-1395
- نویسندگان: امین آرین,محمد مهدی فایزی پور,مجید عزیزی,ریچارد ولوسکی,اسکات لیونگود
- مشاهده
- جایگاه : پژوهشی
- مجله: مجله صنایع چوب و کاغذ ایران
- نوع مقاله: Journal Article
- کلمات کلیدی: مکان یابی,فرآیند تحلیل سلسله مراتبی,استان مازندران,شاخص موثر,صنعت تخته فیبر سخت
- چکیده: در این نوشتار پس از انجام بررسی های لازم یک چارچوب مناسب برای مکان یابی کارخانه تولید تخته فیبر سخت بااستفاده از روش تر در استان مازندران ارائه می شود. با توجه به وجود تنها دو کارخانه قدیمی، فرسوده و با فناوری بسیار پایین در کشور، احداث کارخانه های جدید ضروری است. استان مازندران به لحاظ دارا بودن مواد اولیه لیگنوسلولزی برای احداث کارخانه های صنایع چوب و کاغذ نسبت به استان های دیگر که چنین منابعی را به اندازه کافی در دسترس ندارند، اهمیت بالقوه ای دارد. در این مدل از روش فرآیند تحلیل سلسله مراتبی بر پایه دیدگاه هزینه و سود استفاده شده است. شاخص مواد و محصول با وزن 327/0 و زیرشاخص اطمینان از عرضه ماده اولیه با وزن 146/0 بالاترین اولویت را داشته و شهر ساری به عنوان بهترین گزینه مشخص شد.
- چکیده انگلیسی: This research presents an optimum framework for hardboard industry location selection in Mazandaran Province. Considering the existence of only two depreciated hardboard plants with very old technology in Iran, the establishment of new plants are vital. To materialize this goal, Mazandaran province enjoys priorities to other provinces based on its resources of raw lignocellulosic materials required for wood and paper industries. The model presented in this article uses AHP benefit/cost ratios. The results indicate that the criterion of ‘material and production’ with a weight of 0.327 and the sub-criterion of ‘reliability of supply’ with a weight of 0.146 have the highest priorities, and the city of Sari is the best alternative.
- انتشار مقاله: 29-10-1393
- نویسندگان: مجید عزیزی,مصطفی رمضان زاده
- مشاهده
- جایگاه : پژوهشی
- مجله: مجله بیوتکنولوژی کشاورزی
- نوع مقاله: Journal Article
- کلمات کلیدی: تنوع ژنتیکی,نشانگر,بهنژادی,پونهوحشی
- چکیده: هدف: هدف از این پژوهش بررسی تنوع ژنتیکی ژنوتیپهای مختلف پونه وحشی در شرایط کشت یکسان است که میتواند بهعنوان مقدمهای بر اهلیسازی، حفظ ژرمپلاسم و امکان تلاقی بین ژنوتیپهای آن جهت برنامههای بهنژادی آینده باشد. مواد و روشها: در این پژوهش پس از تهیه 20 ژنوتیپ مختلف از سراسر ایران، کشت آنها در قالب طرح بلوکهای کامل تصادفی در سه تکرار تحت شرایط یکسان انجام شد. پس از استخراج DNA بررسی تنوع ژنتیکی ژنوتیپها با استفاده از 12 نشانگر ISSR از بین 15 نشانگر توسط واکنش زنجیرهای پلیمراز (PCR) انجام گرفت. استخراج اسانس برای هر ژنوتیپ به روش تقطیر با آب انجام شد. عملکرد ماده خشک برحسب گرم بر متر مربع و میزان اسانس بهصورت وزنی-وزنی، براساس وزن خشک اندازهگیری شد. همچنین، ارتباط نشانگرهای مولکولی با صفات عملکرد ماده خشک و بازده اسانس با استفاده از رگرسیون گام به گام تعیین گردید. نتایج: میانگین درصد چندشکلی تعیین شده در مجموع ژنوتیپهای مورد بررسی 97/91 بود. تعداد باندهای چندشکل هر آغازگر از 5 تا 9 عدد متغیر بود و در مجموع 89 باند تکثیری امتیازدهی شدند که از این تعداد 82 مکان، چندشکلی نشان دادند. میانگین محتوای اطلاعات چندشکلی آغازگرها (PIC) 31/0 برآورد گردید و آغازگر IS1 بالاترین مقدار PIC (46/0) را نشان داد. همچنین شاخص نی و شانون برای آغازگر IS1 بهترتیب 43/0 و 61/0 بود. بررسی دندروگرام حاصل از تجزیه خوشهای با استفاده از ضریب تشابه جاکارد و الگوریتم UPGMA ژنوتیپهای مورد بررسی را در چهار گروه قرار داد. بیشترین فاصله ژنتیکی بین ژنوتیپهای خوزستان و قزوین با ضریب 39/0 و کمترین فاصله بین ژنوتیپهای کرمان-2 و کرمان-4 با ضریب تشابه 77/0 مشاهده شد. رگرسیون گام به گام نشان داد که نشانگر IS10 با ضریب تبیین حدود 70/0 بیشترین همبستگی را با صفات درصد اسانس و عملکرد ماده خشک دارد. نتیجهگیری: نتایج این پژوهش نشان داد که نشانگرهای ISSR بهطور مؤثری میتوانند برای مطالعه تنوع ژنتیکی ژنوتیپهای پونه وحشی استفاده شوند. آغازگرهای IS1 و IS10 با داشتن بهترین شاخصهای نشانگری بهعنوان بهترین آغازگرها معرفی شدند. همچنین دو ژنوتیپ خوزستان و قزوین بیشترین فاصله ژنتیکی را داشتند.
- چکیده انگلیسی: Objective This study aimed to investigate the genetic diversity of different genotypes of this valuable medicinal plant under the same culture condition which can be used as an introduction to domestication, germplasm conservation, and possible cross in the future. Materials and Methods In this study, after preparing 20 different genotypes from all over Iran, they were cultivated in complete randomized blocks design with three replications under the same condition. After extraction of DNA, the survey of genetic diversity using 12 ISSR markers from 15 markers was conducted by polymerase chain reaction (PCR). The essential oil for each genotype was extracted by water distillation. The dry yield based on gr/m2 and essential oil content (w/w, based on dry weight) were measured. Furthermore, the correlation of molecular markers with dry yield and essential oil content from each genotype was determined using stepwise regression. Results The mean percentage of polymorphism determined in all the genotypes was 91.97. The number of polymorphic bands for each primer varied from 5 to 9 and a total of 89 replicate bands were scored, of which 82 bands showed polymorphism. The average content of primer information polymorphism (PIC) was estimated to be 0.31 and the IS1 primer showed the highest PIC (0.46). The Ni and Shannon indices for IS1 primers were 0.43 and 0.61, respectively. Cluster analysis using the Jaccard similarity coefficient and UPGMA algorithm divided the studied genotypes into four groups. The highest genetic distance was observed between Khuzestan and Qazvin genotypes with a coefficient of 0.39 and the lowest between Kerman-2 and Kerman-4 genotypes with a similarity coefficient of 0.77. Stepwise regression showed that the IS10 primer has a coefficient of 0.70 with the essential oil percentage and dry matter yield. Conclusion The results of this study showed that ISSR markers can be effectively used to study the genetic diversity of wild mint genotypes and will provide the possibility of breeding. So that, IS1 and IS10 primers were introduced as the best markers. Also, Khuzestan and Qazvin genotypes had the highest genetic distance.
- انتشار مقاله: 27-04-1399
- نویسندگان: علیرضا مشرفی عراقی,حسین نعمتی,مجید عزیزی,نسرین مشکانی,محمود شور
- مشاهده
- جایگاه : پژوهشی
- مجله: متن پژوهی ادبی
- نوع مقاله: Journal Article
- کلمات کلیدی: حافظ,کنایه,ایهام,شگردهای چندمعنایی کردن متن
- چکیده: غالباً متون برجستۀ ادبی علاوه بر زیبایی و خیالانگیزی، اثرگذار هستند. یکی از عوامل اثرگذاری و بلاغت کلام در این متون، چندبُعدی بودن معنای متن و تأویلپذیری آن است. در غزلیات حافظ، ابیات بسیاری دیده میشود که چندوجهی هستند و ظرفیت تأویلپذیری به دو یا چند معنای متمایز را دارند. در این مقاله، به روش توصیفیـ تحلیلی به این مسئله پرداخته میشود که حافظ با چه ابزارها، شگردها و تمهیداتی، سخنش را ذووجوه، چندمعنا و سرانجام، اثرگذار کردهاست و آیا استفادۀ حافظ از این تمهیدات، آگاهانه و تعمدی بودهاست! نتیجۀ بررسیها نشان داد که برخی از شگردهای حافظ در ایجاد ظرفیتهای معنایی و زایندگی متن، عبارتند از: استفاده از کلمات چندمعنایی، استفاده از کنایهها در بسترهای تازة معنایی، شناور بودن معناهای مختلف در بافت کلّی کلام به سبب ساختارهای خاص نحوی، تعلیق معنا به دلیل دو یا چندوجهی بودن مرجع ضمیرها، امکان تبدیل ترکیبهای اضافی و استفاده همزمان از ظرفیتهای مختلف یاهای وحدت، نکره و مصدری. دیگر اینکه استفادۀ مکرر حافظ از این شگردها در ابیات متعدد، بیانگر تعمّد او در این کار و آگاهانه و هدفمند بودن حضور این تمهیدات در شعر وی است.
- چکیده انگلیسی: Often, literary texts are influential, in addition of aesthetic and imaginations. One of the factors in the influence and rhetoric of the word in these texts is the multidimensional meaning of the text and its interpreting capability. In Hafez's poems, there are many couplets that are multi-dimensional and they have the capacity to interpret two or more distinct meanings. In this paper, by analyzing descriptive method, we will examine how Hafez has made his words polysemic and multi-dimensional and, finally, he made effective his speech with what tools, techniques and arrangements, and does Hafez use these measures deliberately and consciously? The results of the studies showed that some of Hafez's skills in creating the semantic capacities and fertility of text are: using of polysemic words, using of metonymy in new semantic contexts, the floating of different meanings in the general context of the word due to specific syntactic structures, suspension of meaning due to two-sided or multidimensionality of reference of the pronouns, the possibility of conversion of additional compositions, and simultaneous using of different capacities of the kind of “ya” in Persian Language (Unity, indefinite, Infinitive). Moreover, Hafiz's frequent use of these techniques in many couplets Indicate his intention in this work and Conscious and purposeful presence of these devices in his poem.
- انتشار مقاله: 28-12-1394
- نویسندگان: مجید عزیزی هابیل,علی نوری,علی حیدری,سعید زهره وند
- مشاهده
- جایگاه : پژوهشی
- مجله: کهن نامه ادب پارسی
- نوع مقاله: Journal Article
- کلمات کلیدی: بلاغت,ایهام,تصحیح متون,ایهام تناسب
- چکیده: در مقالة حاضر تلاش کردهایم به این پرسش پاسخ دهیم که آیا پس از تأیید اصالت نسخ بهدستآمده از یک اثر ادبی و ثبت اختلافات آنها، توجّه به جنبههای بلاغی متون میتواند مصحّح را یاریرسان باشد؟ مزایا و معایب این نگرش چیست؟ به این منظور ابتدا نگاهی مختصر به پیوند تصحیح متون (در سبکهای مختلف) و جنبههای بلاغی انداختهایم و پس از تبیین مبانی پژوهش، از بین جنبههای بلاغی گوناگون، «ایهام» را برگزیدهایم و ضبطهای مختلف شاعران ایهامپرداز را با این سنجه محک زدهایم و نشان دادهایم که گاهی مصحّحان و شارحان متون، بهسبب بیتوجّهی به صنعت مذکور، و یا بهعلّت ناشناخته و متروکبودن برخی از معانی ایهامی کلمات، ضبط برتر را به حاشیه بردهاند و ضبط مرجوح را در متن قرار دادهاند.
- چکیده انگلیسی: in this article we have tried to answer this question can the consideration of rhetorical aspects help the correction after confirming the state of the copy obtained from a good work and the record of their differences? what are the disadvantages of this attitude? that's why we have put together a unique institue for the correction texts &aspects of rhetoric and after explaining the basics of research, from the various rhetorical aspects, we selected the amphibology and tested the different works of the punster poets and we show that sometimes text editors &editors, due to the neglect of the industry mentioned, for some unknown reason, some of the meanings of the obscure margins are undermined.
- انتشار مقاله: 25-12-1398
- نویسندگان: یاسر دالوند,مجید عزیزی
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فناوری رنگ
- نوع مقاله: Journal Article
- کلمات کلیدی: رنگینه طبیعی,موناسکوس پرپورئوس (1603 DSMZ ),متابولیتهای قارچی
- چکیده: در سالهای اخیر مطالعات فراوانی بر روی محیطهای کشت مناسب رشد قارچ موناسکوس پرپورئوس بهمنظور ایجاد شرایط مناسب در فرآیند افزایش تولید رنگینه، صورت گرفته است. در این پژوهش میزان تولید رنگینه و بیوماس توسط موناسکوس پرپورئوس (DSMZ 1603) با استفاده از سه سطح نیترات سدیم (1.5، 3 و 4.5 گرم در لیتر) 5 سطح ساکارز (75، 100، 125، 150 و 175 گرم در لیتر) در قالب طرح فاکتوریل و پنج سطح سولفات روی (0، 5، 10، 15 و 20 میلیگرم در لیتر) در قالب طرح کاملاً تصادفی بررسی شد. تیمارهای کشت شده در محیط مایع درون انکوباتور شیکردار در دمای 25 درجه سانتیگراد و 120 دور در دقیقه قرار گرفتند. براساس نتایج، تولید رنگینهها با افزایش سطح ساکارز بهطور معنیداری افزایش یافت اما با افزایش سطح نیترات سدیم افزایش معنیداری نداشت. بیشترین تولید رنگینه درسطح 175 گرم در لیتر ساکارز همراه با 3 گرم در لیتر نیترات سدیم، مشاهده شد. علاوه بر این بیشترین مقدار بیوماس در غلظت 175گرم در لیتر ساکارز همراه با 4.5 گرم در لیتر نیترات سدیم مشاهده گردید. همچنین نتایج نشان داد، تولید رنگ با افزایش سطح سولفات روی بهطور معنیداری کاهش مییابد به طوری که بیشترین مقدار تولید رنگینهها در تیمار بدون سولفات روی به دست آمد.
- چکیده انگلیسی: In recent years, numerous studies have been conducted on monascus growth media to optimize different conditions of pigment production in this fungus. In this research, biomass and pigment production of Monascus purpureus strain DSMZ 1603 was studied using three levels of sodium nitrate (1.5, 3 and 4.5 g/l) and five levels of saccharose (75, 100, 125, 150 and 175 g/l) in a factorial design and five levels of zinc sulfate (0, 5, 10, 15, 20 mg/l) in a completely randomized design. Treatments were cultured in a broth medium at 25 oC and 150 rpm rotating shaker. The results showed pigment production was enhanced significantly by increasing the saccharose level whereas the effect of sodium nitrate was not significant on the pigment production. The highest rate of pigment production was induced in 175 g/l saccharose with 3 g/l sodium nitrate. The highest biomass produced in the medium contained 175 g/l saccharose with 4.5 g/l sodium nitrate. The results showed pigment production decreased significantly by increasing the levels of zinc sulfate while the highest rate of pigment production was induced in the medium without zinc sulfate.
- انتشار مقاله: 11-10-1348
- نویسندگان: محسن صابری نجفی,خلیل ملکزاده,مجید عزیزی
- مشاهده