در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: بهرهوری,نیاز خالص آبیاری,آبیاری قطرهای نواری,راندمان کاربرد
- چکیده: توسعة سامانههای نوین آبیاری یکی از برنامههای وزارت جهاد کشاورزی در چند دهة گذشته بوده است. ارزیابی نقش این سامانهها در افزایش شاخصهای مدیریت مصرف آب در بخش کشاورزی میتواند در سیاستگذاریها و برنامه-ریزیهای آیندة کشور موثر باشد. ازاینرو، این تحقیق با هدف تعیین شاخصهای مدیریت مصرف آب در تولید گوجه-فرنگی در کشور و ارزیابی نقش آبیاری قطرهای نواری در افزایش آنها، انجام شد. حجم آب کاربردی و عملکرد محصول در 176 مزرعه که در قطب های تولید این محصول در فصل زراعی (98-1397) انتخاب و اندازهگیری شد. مقادیر اندازهگیری شده با نیاز خالص آبیاری حاصل از روش فائو پنمن-مانتیث با استفاده از دادههای هواشناسی و همچنین با مقادیر سند ملی آب مقایسه شدند. در ادامه نیز تاثیر روش آبیاری قطرهای نواری) بر حجم آب کاربردی، راندمان کاربرد و بهرهوری فیزیکی آب در مناطق مورد مطالعه بررسی شد. میانگین وزنی حجم آب کاربردی در مناطق مورد مطالعه 7729 مترمکعب بر هکتار بود. بهرهوری آب در مناطق تولید از 33/4 تا 52/9 کیلوگرم بر مترمکعب متغیر بود و متوسط آن 10/7 کیلوگرم بر مترمکعب به دست آمد. میانگین نیاز خالص آبیاری و راندمان کاربرد آب در مزارع مورد مطالعه بهترتیب 674 میلیمتر و 78 درصد بود. کاربرد آبیاری قطرهای نواری نقش موثری در افزایش شاخصهای مدیریت مصرف آب در مقایسه با روش آبیاری سطحی داشتند. آبیاری قطرهای نواری 25 درصد در کاهش آب کاربردی، 10 درصد در افزایش راندمان کاربرد آب در مزرعه و 16 درصد در ارتقای بهرهوری آب موثر بوده است.
- چکیده انگلیسی: The Role of Modern Irrigation Systems on Tomato Applied Irrigation Water Management in Iran
Introduction
Development of modern irrigation systems has been one of the main programs in developing agricultural sector in the past few decades. Assessing the role of these systems in increasing indicators of irrigation water management can play an important role in future national policies and planning. Therefore, this study was conducted with the aim of appraising water consumption management indicators in tomato production in different regions of Iran and evaluating the role of surface drip irrigation systems in increasing these indicators.
Methodology
In this study, a field survey was conducted to measure yield and applied irrigation water of tomato under the farmers’ management in tomato production hubs. Volume of applied water by farmers in 176 farms in Fars, South Kerman, Hormozgan, Bushehr, Khorasan Razavi, Qazvin, Khuzestan, Golestan, Zanjan, Hamedan and Semnan provinces with different conditions of climates, irrigation methods (furrows and drip), salinity of irrigation water and soil; and different tomato cultivars were measured during growing season 2018-2019. The measured applied irrigation water values were compared with the net irrigation requirements estimated by the FAO Penman-Monteith method using meteorological data from the last 10 years, as well as the values of the national water document. Then, the effect of modern irrigation methods (surface drip irrigation) on applied water, application efficiency and physical water productivity was investigated in the study areas. Crop yield was recorded at the end of the growing season and water productivity (WP) was calcucated as the ratio of yield to total applied water (irrigation water and effective rainfall). Analysis of variance was used to investigate the possible difference between yield, applied water and WP among the hubs. Data adequacy was assessed by using the method provided by Sarmad et al. (2001).
Results and Discussion
The results showed that yield, applied irrigation water and WP in tomato production hubs were significantly different at the P ≤ 0.01. The average volume of applied irrigation water by the farmers was 7729 m3/ha. Water productivity in production areas varied from 4.33 to 9.52 kg/m3 and its average was 7.10 kg/m3. The average net irrigation requirement and irrigation application efficiency were 674 mm and 78%, respectively. Irrigation application efficiency obtained from the studied tomato farms was slightly higher than the average irrigation efficiency in Iran reported by Abbasi et al. (2016). Deficit irrigation was occurred in the fields of some areas such as Bushehr, Golestan and Semnan. Tomato planting time (spring or autumn) affected applied irrigation water, yield and WP. The volume of water used in autumn planted farms (5356 m3/ha) was less than spring planted farms (9831 m3/ha). The average yield of tomatoes in spring planted farms (74.3 t/ha) was significantly higher than the yield of fields planted in autumn (46.1 t/ha). However, the average of WP in spring planting farms (7.7 kg/m3) was higher than the productivity of farms planted in autumn (6.6 kg/m3). The application of surface drip irrigation systems in comparison with furrow irrigation resulted in 25% reducing in applied water, 10% increasing the application efficiency and 16% improving in water productivity.
Conclusions
In general, the results of this study provide useful information on applied irrigation water management indicators in tomato production to managers and water decision makers within Iran. Proper development and management of drip irrigation systems for row crops such as tomatoes and autumn planting of tomatoes in warm tomato production hubs is recommended for effective use of autumn rainfall. Also, training and application of methods to improve the performance of surface irrigation (using methods to reduce evaporation and the use of low pressure systems) is recommended to increase irrigation efficiency and reduce applied irrigation water.- انتشار مقاله: 27-06-1399
- نویسندگان: فریبرز عباسی,محمد جلینی,محمد خرمیان,سید ابراهیم دهقانیان,اسماعیل مقبلی دامنه,مهرداد نورورزی,افشین یوسف گمرکچی,مهدی طاهری,اسحق زارع مهرانی,علیرضا کیانی,نادر سلامتی,سیدحسن موسوی فضل,علی قدمی فیروزآبادی,پرویز بیات,ابوالفضل ناصری
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: نیاز خالص آبیاری,روش آبیاری,پنمن-مانتیث,سند ملی
- چکیده: انگور از مهمترین محصولات باغی است که به لحاظ سطح زیرکشت و ارزش اقتصادی و تغذیهای بالا مورد توجه است. ایران با تولید سالانه 8/2 میلیون تن انگور در زمرة کشورهای برتر در تولید این محصول در جهان است. با این همه، اطلاعات دقیقی در خصوص حجم و بهرهوری آب این محصول در کشور وجود ندارد. ازاینرو، این پژوهش با هدف اندازهگیری میدانی آب کاربردی و ارزیابی بهرهوری آب تاکستانهای کشور در سامانههای مختلف آبیاری اجرا شد. در فصل زراعی 98-1397، حجم آب کاربردی توسط باغداران در 164 باغ از تاکستانهای استانهای قزوین، فارس، خراسانرضوی، زنجان، آذربایجانغربی، آذربایجانشرقی، همدان، مرکزی، خراسانشمالی و سمنان اندازهگیری شد؛ در این باغها رقمهای مختلف انگور با روشهای مختلف آبیاری (سطحی و قطرهای) و شوریهای متفاوت آب آبیاری و خاک با روشهای متفاوت (داربستی و خزنده) کاشته شدهاند. مقادیر اندازهگیری شده با مقادیر برآورد شده به روش پنمن-مانتیث با استفاده از دادههای هواشناسی 10 سال اخیر و همچنین با مقادیر سند ملی آب مقایسه شدند. نتایج مطالعات نشان داد که اختلاف میانگین حجم آب کاربردیو بهرهوری آب در استانهای منتخب در سطح احتمال یک درصد معنیدار است. میانگین وزنی حجم آب کاربردی 6669 مترمکعب بر هکتار و بهرهوری آب 63/2 کیلوگرم انگوربهازای هر مترمکعب آب بهدست آمد. متوسط نیاز خالص آبیاری در مناطق مورد مطالعه به روش پنمن-مانتیث و سند ملی آب بهترتیب 6645 و 6456 مترمکعب بر هکتار است. دامنة تغییرات راندمان کاربرد در تاکستانهای مورد مطالعه از 68 تا 100 درصد و متوسط آن 89 درصد محاسبه شد. نتایج بررسیها حاکی از اعمال کمآبیاری در اغلب تاکستانهای مورد مطالعه به علت دسترسینداشتن به آب کافی است. در این مقاله راهکارهایی برای بهبود بهرهوری آب در تولید انگور نیز ارائه شده است.
- چکیده انگلیسی: Introduction
Grapes is one of the most important horticultural products in terms of cultivation area, economic and high nutritional values. Iran with an annual production of 2.8 million tons, is among the top countries in the production of grape product in the world. However, there are not accurate information on the volume of irrigation applied water and water productivity of this product in Iran. Therefore, this study was conducted with the aim of measurement of applied water at field scale and evaluation of water productivity of grape in vineyards farms at different hubs of this crop production in Iran.
Methodology
The volume of irrigation water provided by gardeners in 164 vineyards were measured in the provinces of Qazvin, Fars, Khorasan-Razavi, Zanjan, West Azarbaijan, East Azarbaijan, Hamedan, Markazi, Northern Khorasan, and Semnan as hubs of this product. These hubs covered about 80 percent of the irrigated vineyard cultivated areas. In each hub, 1-4 cities with the highest area under vineyard cultivation were selected for evaluation. The measurements were carried out in different irrigation and planting methods, various soils, different salinity of irrigation water and soil and different grape varieties during the growing season of 2018-2019 without interfering with the farmer's irrigation program. The measured values were compared with the net irrigation water requirement estimated by the Penman-Monteith method using the last 10 years meteorological data and also with the national water document values. Crop yield was recorded at the end of the growing season and water productivity was calucated as the ratio of yield to total water (irrigation applied water and effective rainfall). Analysis of variance was used to investigate the possible difference between applied water and water efficiency among the hubs. Data adequacy was assessed by using the method prposed by Sarmad et al. (2001).
Results and Discussion
The results showed that the average of applied water and water productivity among the hubs were significant at 1% probability level. The applied irrigation water used in the vineyards and water productivity were 6669 m3/ha and 2.63 kg/m3, respectively. Drip irrigation was about 20% effective compared with surface irrigation in reducing the applied irrigation water in the studied vineyards. Water productivity in drip irrigation orchards was essentially the same as surface irrigation and was not statistically significant. The reason was the lack of proper use and utilization of modern irrigation methods.
The average net irrigation water requirement in the study areas estimated by the Penman-Monteith method using meteorological data for the last 10 years as well as the national water document were 6645 and 6456 m3/ha, respectively. The range of irrigation application efficiency in the studied vineyards was from 68 to 100 and its average was 89%. Comparison of applied water and net irrigation requirement indicated deficit irrigation due to water shortage in vineyards of most hubs. In total, 31% deficit irrigation occurred in the studied vineyards, which is a threat to soil salinity and destruction of soil structure in long-term. Grape planting method had a significant effect on reducing the applied water, increasing grape yield and consequently water productivity. Scaffolding method had a positive and significant effect on all studied indices in comparison with the crawling/reptile planting method. It caused a decrease of about 15% in applied water, an increase of 41% in yield and 37% in crop water productivity.
Conclusions
Due to the fact that vineyards are faced with deficit irrigation and water stress, training the farmers about the accurate and scientific methods of deficit irrigation in the vineyards can be effective to reduce the destructive side effects of water stress. Due to the widespread use of surface irrigation in the vineyards, training and application of methods to improve surface irrigation performance (evaporation reduction methods, using low pressure methods such as gated pipes, mulching, etc.), to increase irrigation efficiency and to reduce irrigation water applied is recommended. Changing traditional planting methods from crawling/reptile to scaffolding and surface irrigation (qana) to furrow, in addition to reducing evaporation, are the effective ways to increase the yield of vineyards and water productivity.- انتشار مقاله: 18-06-1399
- نویسندگان: فریبرز عباسی,ابوالفضل ناصری,معین ادین رضوانی,مصطفی گودرزی,محمد کریمی,امیر اسلامی,مهدی طاهری,افشین یوسف گمرکچی,حیدر طایفه رضایی,حسن خسروی,سیدحسن موسوی فضل,علی قدمی فیروزآبادی,جواد باغانی,نادر عباسی,مهدی اکبری
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: همبستگی,ارزیابی,آزمایش آزمایشگاهی,چکش اشمیت,روش صحرایی
- چکیده: کانالهای انتقال و توزیع آب از سازههای آبی هستند که برای جلوگیری از تلفات نشت آب در مسیر جریان، بستر آنها با استفاده از پوشش بتنی غیرمسلح پوشش داده میشود. کیفیت این نوع پوششها اغلب با روش مخرب و پرهزینۀ مغزهگیری و انتقال مغزهها به آزمایشگاه ارزیابی میشود. در این پژوهش، سه کانال اصلی قلعهقباد، نهر شعبان و جهانآباد از شبکۀ آبیاری نهر شعبان در نهاوند به دو روش مخرب و غیر مخرب ارزیابی شد. برای این منظور در مجموع 6 کیلومتر از کانالهای شبکۀ آبیاری نهر شعبان در نظر گرفته شد و در 13 نقطه از آن به فواصل 500 متری 12 مغزه در هر مقطع و در کل 156 مغزه تهیه گردید. در نقاط مورد نظر آزمایش عدد چکش اشمیت حاصل از بهکارگیری آن نیز اجرا شد. در آزمایشگاه، مقاومت فشاری، جذب آب اولیه و جوشیده و جذب آب مویینه روی آنها آزمایش شد. روابط بین آزمایش غیر مخرب چکش اشمیت با هر یک از پارامترهای حاصل از آزمایشهای آزمایشگاهی روی مغزهها که به روش مخرب تهیه گردیده بودند، بررسی شد. نتایج بهدست آمده نشان داد بین مقادیر عدد چکش اشمیت با مقاومت فشاری رابطۀ نمایی مستقیم با ضریب همبستگی 86 درصد برقرار است. همچنین، بین عدد چکش اشمیت و پارامترهای جذب آب اولیه، جوشیده و مویینه که از پارارمترهای دوام پوشش بتنی در مناطق سردسیر هستند، رابطۀ توانی معکوس با ضریب همبستگی بهترتیب 72، 70 و 71 درصد برقرار است. با توجه به این روابط با همبستگی مناسب، در کانالهای آبیاری با پوشش بتنی، بدون مغزهگیری و تنها با آزمایش غیرمخرب چکش اشمیت در محل میتوان مقادیر مقاومت فشاری، جذب آب اولیه، جوشیده و مویینه را برآورد کرد که از شاخصهای دوام هستند. بین جذب آب نیمساعته و جوشیده نیز رابطۀ مستقیم با ضریب همبستگی بالای 95 درصد برقرار است. برای تعیین درصد آب جوشیدۀ مورد استفاده در تعیین ظرفیت جذب آب که نیاز به بیش از 3 روز زمان دارد میتوان از نتایج جذب آب اولیه استفاده کرد. مشخص شد بین جذب آب جوشیده و مقاومت فشاری رابطۀ معکوس درجه 3 با ضریب همبستگی بالای 96 درصد برقرار است و با افزایش مقدار جذب آب، مقاومت فشاری کاهش مییابد. مطابق این نتیجه، کیفیت پوشش بتنی در کانالهای آبیاری بر مبنای روابط بهدست آمده در این پژوهش، به روش غیرمخرب و با دقت بالایی قابل برآورد خواهد بود.
- چکیده انگلیسی: Introduction Conveyance and Water distribution irrigation canals are hydraulic structures that transport water supplied from sources such as diversion dams for drinking, agricultural, industry or other purposes. These canals are usually lined by materials such as: concrete, stone with sand cement mortar, asphalt, to prevent water seepage losses along the flow path. Concrete lining that is used in irrigation canals is an unreinforced concrete with a thickness of 5 to 10 cm. Basic requirements of good hardened concrete are: satisfactory compressive strength and sufficient durability (Aba, 2005). After the implementation of each engineering structure, it is necessary to evaluate the project to determine the optimal performance and quality of implementation. Evaluation of the quality of irrigation canal linings is often carried out by the destructive and costly method of coring and carried out various experiments in the laboratory. Although destructive method yields relatively exact and straightforward results from the desired parameters, it also has some side problems that are sometimes difficult to recover. The problems of destructive test (DT) method with coring and destructive method are associated with damage of project, high cost, need the expert group and equipment, time-consuming and sometimes stoppage of project operation. Non-destructive testing (NDT) methods can be used to prevent these complications. Electrical, ultrasonic and Schmidt hammer tests are among non-destructive testing. Nowadays, non-destructive testing of concrete has an effective and practical function in the repair of concrete structures. Non-destructive testing of concrete by providing data on various existing structures allows experts to judge and decide on the performance, needs and methods of repair and restoration of concrete structures. The indicator of evaluation of the quality of concrete lining in irrigation canals in different environmental conditions is the same as the other structures based on the amount of compressive strength (Anon., 2014). The failure of hardened concrete due to repeated cycles of thawing- freezing in cold air in hydraulic structures (such as irrigation canals that can absorb water and saturated) is more probable than other concrete structures (Ramazanianpour and Shahnazari, 1988). Methodology In this study, in order to establish a relationship between non-destructive testing (NDT) of Schmidt's Hammer number with destructive testing (DT) of compressive strength and water absorption parameters, 13 sections from 3 main conveyance canals were studied in Nahre Shaban irrigation network in Nahavand City. At all sections, non-destructive testing of Schmidt's Hammer accomplished for determining the rebound number, then from the same points, 12 and totally 156 cores were provided from 3 canals. Next relationship between rebound numbers (RN) with each of the parameters of laboratory experiments on the linings was investigated. The study area in this study was 6 km from the main canal of the irrigation network of Nahre Shaban in 3 sections of Ghaleqabad, Shaban and Jahanabad in Nahavand City. This canal is divided by diversion dam of Sha'ban with height of 3.5 m which was constructed in a section with coordinates of (X = 262862, Y= 3775625) during 1985 and 2001. Table 1 presents the characteristics of the main canal at the location of the Ghaleh Ghobad river section on the Shaban network. The coordinates of each section of the canal intended for coring were determined using GPS; these coordinates are presented for the 13 points in the selected canals in Table 2. Table 1- Geometrical and hydraulic properties of studied canal in Nahavand plain Network name Canal length (m) Lining material Cross section type Discharge (lit/s) Land area (hac.) Geometrical properties Bed (m) Depth (m) Side slope Shaban river 5000 Situ concrete trapezoidal 3000 2700 1.4 1.5 1:1 Table 2. Position and coordinates of canal sections for destructive and non-destructive experiments Coordinates (UTM) Canal Code. Local canal name Y X 3775681 263046 GH1 Ghaleh Ghobad 3776121 262772 GH2 3776737 262411 NSH1 Shaban river 3777241 262299 NSH2 3777606 262335 NSH3 3778060 262086 NSH4 3778201 261471 NSH5 3779031 261256 JNA1 Jahan abad 3779369 261431 JNA2 3779687 261967 JNA3 3779580 262107 JNA4 3779758 261656 JNA5 3779865 261828 JNA6 Results and Discussion Based on the results obtained, Schmidt hammer number and compressive strength values have direct relationship with correlation coefficient of 86%. Also, the Schmitt Hammer and initial, boiled and capillary water have a reverse power relationship with a correlation coefficient of 72, 70 and 71 percent respectively. Considering these relationships with proper correlation, it is possible to estimate the durability parameters in through the non-destructive testing of the Schmidt hammer at the site. There is a direct relationship between the initial and boiled water absorption, with a correlation coefficient above 95%. Therefore, boiled water absorption capacity of cores, w hich requires more than 3 days, can be determined from the results of initial water absorption. There is an inverse relationship with grade of 3 with a correlation coefficient above 96% between boiled water absorption and compressive strength of cores. Conclusions Between Schmidt hammer number and compressive strength values in concrete-lined irrigation canals are a direct relationship with correlation coefficient of 86%. So it is possible to estimate the durability parameters of irrigation canal linings in through the non-destructive testing of the Schmidt hammer number at the site.
- انتشار مقاله: 21-04-1398
- نویسندگان: رضا بهراملو,قاسم اسدیان,سعید گوهری,علی قدمی فیروزآبادی
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: بهره برداری,کیفیت اجرا,تلفات نشت,پوشش استخرها,روش حوضچهای,ژئوممبران
- چکیده: چکیده:
ژئوممبران یکی از انواع ژئوسنتتیک هاست که استفاده از آن برای کنترل تلفات آب در استخرهای ذخیره و کانالهای انتقال و توزیع آب با سرعت در حال رشد است. از مزایای این پوشش علاوه بر سهولت و سرعت در اجرا، آب بندی خوب و جلوگیری از تلفات نشت است. در این تحقیق نقش مسائل اجرایی و بهرهبرداری در استفاده از مزیت کنترل تلفات آب با به کاربردن پوشش ژئوممبران بررسی شده است. برای این منظور در استانهای اصفهان، همدان، خوزستان، سمنان و البرز، 15 استخر پوشش شده با ژئوممبران انتخاب شد؛ این استخرها با ورق ژئوممبران نوع HDPEبا ضخامت 1/5میلیمتر داخلی پوشیده شده بودند؛ عمر پوشش انجام شده در استخرها 8 سال و عمق آنها 3 متر از لبه بود. میزان تلفات کل آب در این استخرها در سه مرحله از سال زراعی به روش حوضچهای تعیین شد. بر اساس نتایج به دست آمده، مقدار تلفات نشت آب از پوشش ژئوممبران بین 0/1 تا 37/6و بهطور متوسط 13/9 لیتر در مترمربع در روز بوده و در حدود 125 برابر کمتر از تلفات نشت در استخرهای دارای پوشش بتنی است. کمترین تلفات نشت در نمونههای ارزیابی شده در استانهای همدان و خوزستان (با 0/3 و 0/2 لیتر در مترمربع در روز)، و بیشترین تلفات نشت در نمونههای ارزیابی شده در استانهای البرز، اصفهان و سمنان بهترتیب با 23/1، 16/2 و 29/6 لیتر در مترمربع در روز تعیین شد. با توجه به یکسان بودن نوع ورق ژئوممبران و شرایط هندسی استخرها، اختلاف در مقدار تلفات آب به مسائل اجرایی و بهرهبرداری از پوشش در استخرها مربوط است. مسائل قابل رؤیت در استخرهایی با مقدار تلفات بالا شامل بیتوجهی به شیببندی اصولی کف در طراحی و اجرا، بی توجهی در لایروبی در حین بهره برداری، بسترسازی نامناسب، متراکم نکردن بستر به شکلی مناسب، وجود سنگ و اشیای نوک تیز در زیر پوشش، ایجاد موج در سطوح شیبدار دیوارههای استخر، بریدگی ناشی از خالی بودن زیر پوشش در محل جوش ها و گوشه های استخر، و تخریب های ناشی از فعالیت های انسانی در حین اجرا و بهره برداری است.- چکیده انگلیسی: Geomembranes is a kind of geosynthetics that is used to control water losses in water storage ponds. and conveyance irrigation canals with a a fast growing rate. This lining material, in addition to the ease and speed of execution, can control water seepage losses completely. In this research, the role of execution and operation issues in control of water seepage losses in geomembrane linings was investigated. For this purpose, in 5 provinces of Alborz, Isfahan, Khouzestan, Semnan and Hamedan, 15 cases (ponds) were selected. All of these ponds were lined with HDPE geomembrane sheets with a thickness of 1.5 mm , made in Iran, with a lifetime of 8 years and ponds depth was 3 meters. Total water losses in these ponds were determined in three stages of one crop year. . Based on the results, the amount of water seepage losses from geomembrane lining is between 0.1 to 37.6 and on an average 13.9 liters/m2/day, which is about 125 times lower than the seepage losses in concrete lining. The lowest seepage losses were in Hamadan and Khuzestan provinces with 0.3 and 0.2 liters/m2/day ,respectively, and the highest value belonged to Alborz, Isfahan and Semnan provinces with 23.1, 16.2 And 29.6 liters/m2/day, respectively. Due to the uniformity of the geomembrane sheets and the geometric conditions of the ponds, the difference in the amount of seepage losses was found to be related to the quality of the execution and operation issues of geomembrane lining in the ponds. The most important issues in the ponds with high value of water seepage losses were the lack of attention to the slopes of the bed in design and execution, sediment accumulation and the need for dredging during operation, inadequate bed prepration and compaction, the presence of rocks and sharp objects under the lining, the formation of wave, the cuts due to the absence of under lining in the weld sides and the corners of the pond and human destruction during the lining.
- انتشار مقاله: 13-05-1396
- نویسندگان: رضا بهراملو,نادر عباسی,محمد موحدان,علی قدمی فیروزآبادی,علیرضا مأمن پوش,سیدحسن موسوی فضل,نادر سلامتی
- مشاهده
- جایگاه : پژوهشی
- مجله: دوفصلنامه فنآوری تولیدات گیاهی
- نوع مقاله: Journal Article
- کلمات کلیدی: پتاسیم,غده,پرولین,قند محلول,تنش آب
- چکیده: محصول سیبزمینی نیاز آبی بالایی داشته و به تنش آبی بسیار حساس میباشد، بنابراین مدیریت آب آبیاری در زراعت آن از اهمیت ویژهای برخوردار است. برای مطالعه عملکرد و خصوصیات بیوشیمیایی برگ گیاه سیبزمینی در شرایط کمآبیاری، آزمایشی مزرعهای به شکل کرتهای خردشده و در قالب طرح بلوکهای کامل تصادفی با سه تکرار به اجراء درآمد. کرت اصلی، شامل شش رژیم آبیاری ]100%، 90%، 80%، 70%، 60%، 50% از نیاز آبی[ و کرتهای فرعی، شامل ارقام سانته و ساوالان بودند. تیمارهای آبیاری تأثیر معنیداری بر پروتئین و قندهای محلول برگ، محتوای نسبی آب برگ، عملکرد و وزن خشک غده در بوته داشتند. تنش شدید کمآبی، محتوای پروتئینهای محلول برگ، محتوای نسبی آب برگ، عملکرد و وزن خشک غده در بوته را کاهش داد. اثر متقابل رژیم آبیاری و رقم روی غلظت پتاسیم و پرولین برگ معنیدار بود. همچنین نتایج نشان دادند که بیشترین قند (8/2 میکرومول بر گرم وزنتر) و پروتئین محلول (سه میکرومول بر گرم وزنتر)، بهترتیب به رژیم آبیاری 50% و 80% مربوط بودند. کمترین عملکرد (9/204 گرم در بوته) و وزن خشک غده (8/46 گرم در بوته) در 50% از آبیاری کامل دیده شد. بالاترین غلظت پتاسیم (43 میلیگرم در گرم وزن خشک) و پرولین (2/2 میکرومول در گرم وزنتر) برگ به رژیم آبیاری 50% و رقم سانته تعلق داشتند. نتایج این تحقیق نشان داد که در شرایط کمآبی با مدیریت صحیح آب (کم آبیاری) و نیز تغذیه مناسب، میتوان اثرات سوء تنش خشکی را کاهش داده و به تولید مطلوبی دست یافت.
- چکیده انگلیسی: Potato crop requires substantial amount of water and is extremely susceptible to water stress. Therefore, irrigation management is particularly important for its cultivation. In order to study of yield and biochemical properties of potato leaves under deficit irrigation, a field split-plot experiment was carried out based on a completely randomized block design with three replications. Main plot included six irrigation regimes [100%, 90%, 80%, 70%, 60%, and 50% of water requirement] and sub-plots included cultivars Sante and Savalan. Irrigation treatments had significant effects on leaf soluble proteins and sugar, leaf relative water content, and yields and dry weights of tubers per plant. Severe water deficit stress reduced leaf soluble proteins content, leaf relative water content, yields and dry weights of tubers per plant. Irrigation regime × cultivar interaction was significant for concentrations of leaf potassium and proline. Results also indicated that the highest values of soluble sugar (2.8 µmol.g-1of FW) and soluble proteins (3 µmol.gr-1of FW) were related to 50% and80% irrigation regimes, respectively. The lowest yield (204.9 gr.plant-1) and dry weight (46.8 gr.plant-1) of tubers were observed in 50% of complete irrigation. Maximum concentrations of potassium(43 mg.gr-1of DW) and proline (2.2 µmol.gr-1 of FW) in leaves belonged to 50% irrigation regime in cv. Sante. Result from the present research indicated that, under drought conditions, adverse effects of water stress can be reduced and desirable product can be attained by managing irrigation (deficit irrigation) appropriately.
- انتشار مقاله: 19-12-1393
- نویسندگان: رضا حمزه ئی,ویگوآراموویچ داوتین,محمد اقبال قبادی,خسرو پرویزی,علی قدمی فیروزآبادی
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: نیاز خالص آبیاری,روش آبیاری,پنمن-مانتیث,سند ملی
- چکیده: انگور از مهمترین محصولات باغی است که به لحاظ سطح زیرکشت و ارزش اقتصادی و تغذیهای بالا مورد توجه است. ایران با تولید سالانه 8/2 میلیون تن انگور در زمرة کشورهای برتر در تولید این محصول در جهان است. با این همه، اطلاعات دقیقی در خصوص حجم و بهرهوری آب این محصول در کشور وجود ندارد. ازاینرو، این پژوهش با هدف اندازهگیری میدانی آب کاربردی و ارزیابی بهرهوری آب تاکستانهای کشور در سامانههای مختلف آبیاری اجرا شد. در فصل زراعی 98-1397، حجم آب کاربردی توسط باغداران در 164 باغ از تاکستانهای استانهای قزوین، فارس، خراسانرضوی، زنجان، آذربایجانغربی، آذربایجانشرقی، همدان، مرکزی، خراسانشمالی و سمنان اندازهگیری شد؛ در این باغها رقمهای مختلف انگور با روشهای مختلف آبیاری (سطحی و قطرهای) و شوریهای متفاوت آب آبیاری و خاک با روشهای متفاوت (داربستی و خزنده) کاشته شدهاند. مقادیر اندازهگیری شده با مقادیر برآورد شده به روش پنمن-مانتیث با استفاده از دادههای هواشناسی 10 سال اخیر و همچنین با مقادیر سند ملی آب مقایسه شدند. نتایج مطالعات نشان داد که اختلاف میانگین حجم آب کاربردیو بهرهوری آب در استانهای منتخب در سطح احتمال یک درصد معنیدار است. میانگین وزنی حجم آب کاربردی 6669 مترمکعب بر هکتار و بهرهوری آب 63/2 کیلوگرم انگوربهازای هر مترمکعب آب بهدست آمد. متوسط نیاز خالص آبیاری در مناطق مورد مطالعه به روش پنمن-مانتیث و سند ملی آب بهترتیب 6645 و 6456 مترمکعب بر هکتار است. دامنة تغییرات راندمان کاربرد در تاکستانهای مورد مطالعه از 68 تا 100 درصد و متوسط آن 89 درصد محاسبه شد. نتایج بررسیها حاکی از اعمال کمآبیاری در اغلب تاکستانهای مورد مطالعه به علت دسترسینداشتن به آب کافی است. در این مقاله راهکارهایی برای بهبود بهرهوری آب در تولید انگور نیز ارائه شده است.
- چکیده انگلیسی: Introduction
Grapes is one of the most important horticultural products in terms of cultivation area, economic and high nutritional values. Iran with an annual production of 2.8 million tons, is among the top countries in the production of grape product in the world. However, there are not accurate information on the volume of irrigation applied water and water productivity of this product in Iran. Therefore, this study was conducted with the aim of measurement of applied water at field scale and evaluation of water productivity of grape in vineyards farms at different hubs of this crop production in Iran.
Methodology
The volume of irrigation water provided by gardeners in 164 vineyards were measured in the provinces of Qazvin, Fars, Khorasan-Razavi, Zanjan, West Azarbaijan, East Azarbaijan, Hamedan, Markazi, Northern Khorasan, and Semnan as hubs of this product. These hubs covered about 80 percent of the irrigated vineyard cultivated areas. In each hub, 1-4 cities with the highest area under vineyard cultivation were selected for evaluation. The measurements were carried out in different irrigation and planting methods, various soils, different salinity of irrigation water and soil and different grape varieties during the growing season of 2018-2019 without interfering with the farmer's irrigation program. The measured values were compared with the net irrigation water requirement estimated by the Penman-Monteith method using the last 10 years meteorological data and also with the national water document values. Crop yield was recorded at the end of the growing season and water productivity was calucated as the ratio of yield to total water (irrigation applied water and effective rainfall). Analysis of variance was used to investigate the possible difference between applied water and water efficiency among the hubs. Data adequacy was assessed by using the method prposed by Sarmad et al. (2001).
Results and Discussion
The results showed that the average of applied water and water productivity among the hubs were significant at 1% probability level. The applied irrigation water used in the vineyards and water productivity were 6669 m3/ha and 2.63 kg/m3, respectively. Drip irrigation was about 20% effective compared with surface irrigation in reducing the applied irrigation water in the studied vineyards. Water productivity in drip irrigation orchards was essentially the same as surface irrigation and was not statistically significant. The reason was the lack of proper use and utilization of modern irrigation methods.
The average net irrigation water requirement in the study areas estimated by the Penman-Monteith method using meteorological data for the last 10 years as well as the national water document were 6645 and 6456 m3/ha, respectively. The range of irrigation application efficiency in the studied vineyards was from 68 to 100 and its average was 89%. Comparison of applied water and net irrigation requirement indicated deficit irrigation due to water shortage in vineyards of most hubs. In total, 31% deficit irrigation occurred in the studied vineyards, which is a threat to soil salinity and destruction of soil structure in long-term. Grape planting method had a significant effect on reducing the applied water, increasing grape yield and consequently water productivity. Scaffolding method had a positive and significant effect on all studied indices in comparison with the crawling/reptile planting method. It caused a decrease of about 15% in applied water, an increase of 41% in yield and 37% in crop water productivity.
Conclusions
Due to the fact that vineyards are faced with deficit irrigation and water stress, training the farmers about the accurate and scientific methods of deficit irrigation in the vineyards can be effective to reduce the destructive side effects of water stress. Due to the widespread use of surface irrigation in the vineyards, training and application of methods to improve surface irrigation performance (evaporation reduction methods, using low pressure methods such as gated pipes, mulching, etc.), to increase irrigation efficiency and to reduce irrigation water applied is recommended. Changing traditional planting methods from crawling/reptile to scaffolding and surface irrigation (qana) to furrow, in addition to reducing evaporation, are the effective ways to increase the yield of vineyards and water productivity.- انتشار مقاله: 18-06-1399
- نویسندگان: فریبرز عباسی,ابوالفضل ناصری,معین ادین رضوانی,مصطفی گودرزی,محمد کریمی,امیر اسلامی,مهدی طاهری,افشین یوسف گمرکچی,حیدر طایفه رضایی,حسن خسروی,سیدحسن موسوی فضل,علی قدمی فیروزآبادی,جواد باغانی,نادر عباسی,مهدی اکبری
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: همبستگی,ارزیابی,آزمایش آزمایشگاهی,چکش اشمیت,روش صحرایی
- چکیده: کانالهای انتقال و توزیع آب از سازههای آبی هستند که برای جلوگیری از تلفات نشت آب در مسیر جریان، بستر آنها با استفاده از پوشش بتنی غیرمسلح پوشش داده میشود. کیفیت این نوع پوششها اغلب با روش مخرب و پرهزینۀ مغزهگیری و انتقال مغزهها به آزمایشگاه ارزیابی میشود. در این پژوهش، سه کانال اصلی قلعهقباد، نهر شعبان و جهانآباد از شبکۀ آبیاری نهر شعبان در نهاوند به دو روش مخرب و غیر مخرب ارزیابی شد. برای این منظور در مجموع 6 کیلومتر از کانالهای شبکۀ آبیاری نهر شعبان در نظر گرفته شد و در 13 نقطه از آن به فواصل 500 متری 12 مغزه در هر مقطع و در کل 156 مغزه تهیه گردید. در نقاط مورد نظر آزمایش عدد چکش اشمیت حاصل از بهکارگیری آن نیز اجرا شد. در آزمایشگاه، مقاومت فشاری، جذب آب اولیه و جوشیده و جذب آب مویینه روی آنها آزمایش شد. روابط بین آزمایش غیر مخرب چکش اشمیت با هر یک از پارامترهای حاصل از آزمایشهای آزمایشگاهی روی مغزهها که به روش مخرب تهیه گردیده بودند، بررسی شد. نتایج بهدست آمده نشان داد بین مقادیر عدد چکش اشمیت با مقاومت فشاری رابطۀ نمایی مستقیم با ضریب همبستگی 86 درصد برقرار است. همچنین، بین عدد چکش اشمیت و پارامترهای جذب آب اولیه، جوشیده و مویینه که از پارارمترهای دوام پوشش بتنی در مناطق سردسیر هستند، رابطۀ توانی معکوس با ضریب همبستگی بهترتیب 72، 70 و 71 درصد برقرار است. با توجه به این روابط با همبستگی مناسب، در کانالهای آبیاری با پوشش بتنی، بدون مغزهگیری و تنها با آزمایش غیرمخرب چکش اشمیت در محل میتوان مقادیر مقاومت فشاری، جذب آب اولیه، جوشیده و مویینه را برآورد کرد که از شاخصهای دوام هستند. بین جذب آب نیمساعته و جوشیده نیز رابطۀ مستقیم با ضریب همبستگی بالای 95 درصد برقرار است. برای تعیین درصد آب جوشیدۀ مورد استفاده در تعیین ظرفیت جذب آب که نیاز به بیش از 3 روز زمان دارد میتوان از نتایج جذب آب اولیه استفاده کرد. مشخص شد بین جذب آب جوشیده و مقاومت فشاری رابطۀ معکوس درجه 3 با ضریب همبستگی بالای 96 درصد برقرار است و با افزایش مقدار جذب آب، مقاومت فشاری کاهش مییابد. مطابق این نتیجه، کیفیت پوشش بتنی در کانالهای آبیاری بر مبنای روابط بهدست آمده در این پژوهش، به روش غیرمخرب و با دقت بالایی قابل برآورد خواهد بود.
- چکیده انگلیسی: Introduction Conveyance and Water distribution irrigation canals are hydraulic structures that transport water supplied from sources such as diversion dams for drinking, agricultural, industry or other purposes. These canals are usually lined by materials such as: concrete, stone with sand cement mortar, asphalt, to prevent water seepage losses along the flow path. Concrete lining that is used in irrigation canals is an unreinforced concrete with a thickness of 5 to 10 cm. Basic requirements of good hardened concrete are: satisfactory compressive strength and sufficient durability (Aba, 2005). After the implementation of each engineering structure, it is necessary to evaluate the project to determine the optimal performance and quality of implementation. Evaluation of the quality of irrigation canal linings is often carried out by the destructive and costly method of coring and carried out various experiments in the laboratory. Although destructive method yields relatively exact and straightforward results from the desired parameters, it also has some side problems that are sometimes difficult to recover. The problems of destructive test (DT) method with coring and destructive method are associated with damage of project, high cost, need the expert group and equipment, time-consuming and sometimes stoppage of project operation. Non-destructive testing (NDT) methods can be used to prevent these complications. Electrical, ultrasonic and Schmidt hammer tests are among non-destructive testing. Nowadays, non-destructive testing of concrete has an effective and practical function in the repair of concrete structures. Non-destructive testing of concrete by providing data on various existing structures allows experts to judge and decide on the performance, needs and methods of repair and restoration of concrete structures. The indicator of evaluation of the quality of concrete lining in irrigation canals in different environmental conditions is the same as the other structures based on the amount of compressive strength (Anon., 2014). The failure of hardened concrete due to repeated cycles of thawing- freezing in cold air in hydraulic structures (such as irrigation canals that can absorb water and saturated) is more probable than other concrete structures (Ramazanianpour and Shahnazari, 1988). Methodology In this study, in order to establish a relationship between non-destructive testing (NDT) of Schmidt's Hammer number with destructive testing (DT) of compressive strength and water absorption parameters, 13 sections from 3 main conveyance canals were studied in Nahre Shaban irrigation network in Nahavand City. At all sections, non-destructive testing of Schmidt's Hammer accomplished for determining the rebound number, then from the same points, 12 and totally 156 cores were provided from 3 canals. Next relationship between rebound numbers (RN) with each of the parameters of laboratory experiments on the linings was investigated. The study area in this study was 6 km from the main canal of the irrigation network of Nahre Shaban in 3 sections of Ghaleqabad, Shaban and Jahanabad in Nahavand City. This canal is divided by diversion dam of Sha'ban with height of 3.5 m which was constructed in a section with coordinates of (X = 262862, Y= 3775625) during 1985 and 2001. Table 1 presents the characteristics of the main canal at the location of the Ghaleh Ghobad river section on the Shaban network. The coordinates of each section of the canal intended for coring were determined using GPS; these coordinates are presented for the 13 points in the selected canals in Table 2. Table 1- Geometrical and hydraulic properties of studied canal in Nahavand plain Network name Canal length (m) Lining material Cross section type Discharge (lit/s) Land area (hac.) Geometrical properties Bed (m) Depth (m) Side slope Shaban river 5000 Situ concrete trapezoidal 3000 2700 1.4 1.5 1:1 Table 2. Position and coordinates of canal sections for destructive and non-destructive experiments Coordinates (UTM) Canal Code. Local canal name Y X 3775681 263046 GH1 Ghaleh Ghobad 3776121 262772 GH2 3776737 262411 NSH1 Shaban river 3777241 262299 NSH2 3777606 262335 NSH3 3778060 262086 NSH4 3778201 261471 NSH5 3779031 261256 JNA1 Jahan abad 3779369 261431 JNA2 3779687 261967 JNA3 3779580 262107 JNA4 3779758 261656 JNA5 3779865 261828 JNA6 Results and Discussion Based on the results obtained, Schmidt hammer number and compressive strength values have direct relationship with correlation coefficient of 86%. Also, the Schmitt Hammer and initial, boiled and capillary water have a reverse power relationship with a correlation coefficient of 72, 70 and 71 percent respectively. Considering these relationships with proper correlation, it is possible to estimate the durability parameters in through the non-destructive testing of the Schmidt hammer at the site. There is a direct relationship between the initial and boiled water absorption, with a correlation coefficient above 95%. Therefore, boiled water absorption capacity of cores, w hich requires more than 3 days, can be determined from the results of initial water absorption. There is an inverse relationship with grade of 3 with a correlation coefficient above 96% between boiled water absorption and compressive strength of cores. Conclusions Between Schmidt hammer number and compressive strength values in concrete-lined irrigation canals are a direct relationship with correlation coefficient of 86%. So it is possible to estimate the durability parameters of irrigation canal linings in through the non-destructive testing of the Schmidt hammer number at the site.
- انتشار مقاله: 21-04-1398
- نویسندگان: رضا بهراملو,قاسم اسدیان,سعید گوهری,علی قدمی فیروزآبادی
- مشاهده
- جایگاه : پژوهشی
- مجله: تحقیقات مهندسی سازه های آبیاری و زهکشی
- نوع مقاله: Journal Article
- کلمات کلیدی: بهره برداری,کیفیت اجرا,تلفات نشت,پوشش استخرها,روش حوضچهای,ژئوممبران
- چکیده: چکیده:
ژئوممبران یکی از انواع ژئوسنتتیک هاست که استفاده از آن برای کنترل تلفات آب در استخرهای ذخیره و کانالهای انتقال و توزیع آب با سرعت در حال رشد است. از مزایای این پوشش علاوه بر سهولت و سرعت در اجرا، آب بندی خوب و جلوگیری از تلفات نشت است. در این تحقیق نقش مسائل اجرایی و بهرهبرداری در استفاده از مزیت کنترل تلفات آب با به کاربردن پوشش ژئوممبران بررسی شده است. برای این منظور در استانهای اصفهان، همدان، خوزستان، سمنان و البرز، 15 استخر پوشش شده با ژئوممبران انتخاب شد؛ این استخرها با ورق ژئوممبران نوع HDPEبا ضخامت 1/5میلیمتر داخلی پوشیده شده بودند؛ عمر پوشش انجام شده در استخرها 8 سال و عمق آنها 3 متر از لبه بود. میزان تلفات کل آب در این استخرها در سه مرحله از سال زراعی به روش حوضچهای تعیین شد. بر اساس نتایج به دست آمده، مقدار تلفات نشت آب از پوشش ژئوممبران بین 0/1 تا 37/6و بهطور متوسط 13/9 لیتر در مترمربع در روز بوده و در حدود 125 برابر کمتر از تلفات نشت در استخرهای دارای پوشش بتنی است. کمترین تلفات نشت در نمونههای ارزیابی شده در استانهای همدان و خوزستان (با 0/3 و 0/2 لیتر در مترمربع در روز)، و بیشترین تلفات نشت در نمونههای ارزیابی شده در استانهای البرز، اصفهان و سمنان بهترتیب با 23/1، 16/2 و 29/6 لیتر در مترمربع در روز تعیین شد. با توجه به یکسان بودن نوع ورق ژئوممبران و شرایط هندسی استخرها، اختلاف در مقدار تلفات آب به مسائل اجرایی و بهرهبرداری از پوشش در استخرها مربوط است. مسائل قابل رؤیت در استخرهایی با مقدار تلفات بالا شامل بیتوجهی به شیببندی اصولی کف در طراحی و اجرا، بی توجهی در لایروبی در حین بهره برداری، بسترسازی نامناسب، متراکم نکردن بستر به شکلی مناسب، وجود سنگ و اشیای نوک تیز در زیر پوشش، ایجاد موج در سطوح شیبدار دیوارههای استخر، بریدگی ناشی از خالی بودن زیر پوشش در محل جوش ها و گوشه های استخر، و تخریب های ناشی از فعالیت های انسانی در حین اجرا و بهره برداری است.- چکیده انگلیسی: Geomembranes is a kind of geosynthetics that is used to control water losses in water storage ponds. and conveyance irrigation canals with a a fast growing rate. This lining material, in addition to the ease and speed of execution, can control water seepage losses completely. In this research, the role of execution and operation issues in control of water seepage losses in geomembrane linings was investigated. For this purpose, in 5 provinces of Alborz, Isfahan, Khouzestan, Semnan and Hamedan, 15 cases (ponds) were selected. All of these ponds were lined with HDPE geomembrane sheets with a thickness of 1.5 mm , made in Iran, with a lifetime of 8 years and ponds depth was 3 meters. Total water losses in these ponds were determined in three stages of one crop year. . Based on the results, the amount of water seepage losses from geomembrane lining is between 0.1 to 37.6 and on an average 13.9 liters/m2/day, which is about 125 times lower than the seepage losses in concrete lining. The lowest seepage losses were in Hamadan and Khuzestan provinces with 0.3 and 0.2 liters/m2/day ,respectively, and the highest value belonged to Alborz, Isfahan and Semnan provinces with 23.1, 16.2 And 29.6 liters/m2/day, respectively. Due to the uniformity of the geomembrane sheets and the geometric conditions of the ponds, the difference in the amount of seepage losses was found to be related to the quality of the execution and operation issues of geomembrane lining in the ponds. The most important issues in the ponds with high value of water seepage losses were the lack of attention to the slopes of the bed in design and execution, sediment accumulation and the need for dredging during operation, inadequate bed prepration and compaction, the presence of rocks and sharp objects under the lining, the formation of wave, the cuts due to the absence of under lining in the weld sides and the corners of the pond and human destruction during the lining.
- انتشار مقاله: 13-05-1396
- نویسندگان: رضا بهراملو,نادر عباسی,محمد موحدان,علی قدمی فیروزآبادی,علیرضا مأمن پوش,سیدحسن موسوی فضل,نادر سلامتی
- مشاهده
- جایگاه : پژوهشی
- مجله: مجله پژوهشهای حفاظت آب و خاک
- نوع مقاله: Journal Article
- کلمات کلیدی: آفتابگردان,تابع هزینه,کمآبیاری,عمق بهینه,تابع عملکرد
- چکیده: محدودیت آب از مهمترین عوامل بازدارنده تولید محصولات زراعی به شمار میرود، بنابراین انتخاب یک راهبرد بهینه و برتر برای استفاده از آب در شرایط کمبود آب ضروری است. بهاین منظور پژوهشی در قالب طرح بلوکهای کامل تصادفی با 4 تیمار (55، 75، 100 و 125 درصد نیاز آّبی) و 3 تکرار روی گیاه آفتابگردان در دانشگاه کشاورزی و منابع طبیعی ساری انجام گرفت. هدف اصلی این پژوهش برآورد تابع تولید، محاسبه عمقهای شاخص و بهینه آب مصرفی و مطالعه اقتصادی اثر کمآبیاری بر عملکرد محصول می-باشد. بر پایه تحلیل ریاضی و اقتصادی توابع تولید، هزینه و درآمد، عمقهای شاخص و بهینه آبیاری مورد ارزیابی قرار گرفت. یافتههای این پژوهش نشان داد که بیشترین عملکرد محصول 5407 کیلوگرم بهازای یک متر مکعب آب بوده که مربوط به ارتفاع 78 سانتی متر آب آبیاری است و حدکثر درآمد خالص 25201563 ریال در هکتار و مربوط به مصرف 3/77 سانتی متر آب آبیاری میباشد. بیشترین مقدار آب صرفهجویی شده نسبت به آبیاری کامل، متعلق به عمق معادل آبیاری در حالت محدودیت آب بدست آمد، که امکان افزایش سطح زیر کشت نسبت به آبیاری کامل به میزان 15 درصد وجود دارد، با وجود اینکه بالاترین میزان عملکرد متعلق به آبیاری کامل بود، اما به دلیل بالا رفتن هزینهها سود خالص نهایی حداکثر نشد. بیشترین بازده ریالی برای هر متر مکعب آب در شرایط محدودیت آب و بهمیزان 3362 ریال محاسبه شد. در شرایط کمآبی و با هدف کسب سود حداکثر، کاهش آب آبیاری آفتابگردان به میزان 15 درصد میتواند، اعمال گردد.
- چکیده انگلیسی: Water limitation is one of the most factors in preventing for crop production. Therefore, choosing an optimal strategy for the best use of the water is essential in water scarcity condition. To calculate the index and optimal depths of crop water use, and maximizing the profit under deficit irrigation practices, this study was performed in case of randomized complete block design which has 4 treatments and 3 repeats in sari university. The main purpose of this research is Estimating the production function, index and optimal depth and Economic effects of the deficit irrigation on yield production, so functions of production, costs and revenues, and the index optimal irrigation depths were evaluated. The results indicated that the highest yield was 5407 kg per cubic meter, which related to 78 cm of irrigation water depth and the maximum of Net income was 25,201,563 rials with 77.3 cm irrigation water depth. Also results showed that the maximum saved water relative complete irrigation belongs to irrigation equal depth under water limitation. It can be concluded that with the savings of water under deficit irrigation practices, the planting area would increase by 15%. Although the complete irrigation had the maximum yield, but the marginal net profit was not maximum because of the cost rise. The highest earning return under water limitation will be 3362 rails. So aiming to maximize the use of unit volume of water in water limitation condition the optimized irrigation depth would be done 15% less than the complete irrigation.
- انتشار مقاله: 08-12-1391
- نویسندگان: علی قدمی فیروزآبادی,علی شاهنظری,محمود رائینی سرجاز
- مشاهده
- جایگاه : پژوهشی
- مجله: پژوهش آب در کشاورزی
- نوع مقاله: Journal Article
- کلمات کلیدی: راندمان آبیاری,سنترپیوت,طراحی آبیاری بارانی,ویلموو,یکنواختی توزیع
- چکیده: استان سمنان به خاطر موقعیت جغرافیایی، اقلیم بیابانی و نیمه بیابانی با محدودیتهای آبوخاک مواجه است. روشهای آبیاری تحتفشار بهعنوان یکی از گزینههای بهبود بهرهوری مصرف آب در استان سمنان توسعهیافته است. این تحقیق با هدف ارزیابی سامانههای آبیاری بارانی در استان سمنان انجام شد. به این منظور در این پژوهش تعداد شش طرح از طرحهای آبیاری بارانی ویلموو، کلاسیک ثابت با آبپاش متحرک، و سنترپیوت در چند مزرعه مورد ارزیابی فنی قرار گرفت. مقادیر راندمان پتانسیل کاربرد آب (PELQ)، راندمان واقعی کاربرد آب (AELQ)، ضریب یکنواختی (CU) و یکنواختی توزیع (DU) در سامانههای ویلموو به ترتیب برابر 7/40، 6/29، 2/57 و 7/52 درصد و در سامانههای کلاسیک ثابت 8/54 ، 8/54، 75 و 65 درصد به دست آمد. در روش سنتر پیوت نیز مقادیر فوق به ترتیب برابر 83، 6/79، 5/94 و 91 درصد بود. ملاحظه شد این پارامترها در سامانه سنترپیوت بهترین وضعیت را داشتند. طراحی خوب، وجود آبپاشهای مناسب و نو و پایین بودن ارتفاع آبپاشها در دستگاه سنترپیوت از عوامل عملکرد بهتر این سامانه بود. پس از آن، روش کلاسیک ثابت با آبپاش متحرک از وضعیت بهتری برخوردار بود. پایین بودن ارتفاع آبپاشها و وجود فشار مناسب در سامانه باعث افزایش کارآیی آن در مزرعه شماره چهار شده بود در حالیکه در مزرعه شماره پنج فاصله نامناسب آبپاشها باعث کاهش کارآیی روش کلاسیک ثابت با آبپاش متحرک شده بود. در مزارع دیگر، فشار کارکرد کم آبپاشها، کاهش آبدهی و شعاع پاشش آبپاشها نسبت به مقادیر اسمی و اختلاف فشار زیاد در سامانه، کارآیی ویلموو را کاهش داده بود.
- چکیده انگلیسی: Semnan province faces water and soil limitations due to its geographical location, desert and semi-desert climate. Pressurized irrigation methods are used as one of the options for improving water use efficiency in this province. In this study, sprinkler irrigation systems were evaluated in Semnan province. For this purpose, 6 sprinkler irrigation systems including wheel move, classic with portable sprinkler, and center pivot systems were evaluated in different farms. Potential and actual application efficiency (PELQ and AELQ), uniformity, and distribution coefficients (CU and DU) for wheel move systems were 40.7%, 29.6%, 57.2% and 52.7%, respectively, and for classic systems with portable sprinkler they were 54.8%, 54.8%, 75% and 65%. For center pivot system, these parameters were 83%, 79.6%, 5/94%, and 91%, respectively. In center pivot system, these parameters were the best. Good designing, new and appropriate sprinklers, and low height of sprinklers were the factors causing better operation of this system. Next to center pivot, the classic system with portable sprinkler had better performance. New and appropriate sprinklers, low height of sprinklers, and appropriate pressure in this system increased the efficiency in farm No.4, while in farm No. 5, inappropriate sprinklers distance decreased efficiency of the classic system with portable sprinkler. In other farms, low pressure of sprinklers, decreasing the discharge and spray radius of sprinklers relative to nominal values and high pressure difference in the system caused low efficiency of wheel move system.
- انتشار مقاله: 21-04-1396
- نویسندگان: نادر نادری,علی قدمی فیروزآبادی,محمود فرومدی
- مشاهده