در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: فصلنامه علمی علوم و فناوریهای پدافند نوین
- نوع مقاله: Journal Article
- کلمات کلیدی: منابع آب,سامانههای اطلاعات جغرافیایی,SWMM,ی شیمیایی,پخش آلودگی
- چکیده: آلودگی آب ناشی از مواد شیمیایی به اشکال مختلف مانند بمبهای شیمیایی، حملات تروریستی و اتفاقات ناخواسته یکی از نگرانیهای اصلی جوامع بشری است. آلودگیهای شیمیایی میتواند بهدلیل نشت مواد آلاینده در سطح زمین یا بارندگی در زمان آلودهبودن هوا همراه با باران وارد آب شوند. هدف اصلی این تحقیق مدلسازی زمان رسیدن آلودگی آبهای سطحی به حداکثر مقدار خود پس از ورود آلودگی شیمیایی به آن میباشد. در این تحقیق، پخش آلودگی شیمیایی ناشی از عامل تاولزای فسژناکسیم با استفاده از نرمافزارهای ArcGIS و SWMM در کلیه مناطق مجاور رودخانه کن و شمال سیل برگردان غرب تهران مدلسازی شده است. نتایج حاصل از این پژوهش نشان میدهد که میزان حداکثر غلظت آلودگی به دوره بازگشت بارندگی، غلظت آلودگی و نیز جنس و شیب زمین بستگی دارد و همچنین، زمان رسیدن به حداکثر میزان آلودگی تقریباً ثابت و بین 3 تا 4 ساعت است.
- چکیده انگلیسی: Water pollution caused by chemical materials in different forms such as chemical bombs, terrorist attacks, and reluctant events is one of the main concerns of human societies. Chemical pollutions can permeate into surface waters because of the release of pollutions on the ground or rainfall in the time of air pollution. The main objective of this study is to model the surface water pollution reaching its maximum level after entering the chemical pollution. In this study, diffusion of chemical pollution caused by phosgene oxime (blister agent) in all areas alongside to Kan River and the reverse flood area of the west of Tehran is modeled using ArcGIS and SWMM softwares. Based on the results, the maximum density of pollution depends on the return period of rainfall, the pollution density, and type and slope of the ground. Also, the time to reach the maximum pollution is almost constant between 3 to 4 hours.
- انتشار مقاله: 10-11-1397
- نویسندگان: صفا خزائی,محمد جواد کاظمی
- مشاهده
- جایگاه : پژوهشی
- مجله: فصلنامه علمی علوم و فناوریهای پدافند نوین
- نوع مقاله: Journal Article
- کلمات کلیدی:
- چکیده: استفاده از الگوهای استتار مناسب برای ابنیه، یکی از چالشهای موجود در حوزه پدافند غیرعامل است. در این تحقیق با هدف طراحی الگوهای استتار مرئی، یک روش خودکار بر مبنای پردازش تصاویر ماهوارهای با توان تفکیک مکانی بالا ارائه شده است. در این روش، ابتدا محدوده ساختمان مورد نظر بر روی تصویر ماهوارهای مشخص و از تصویر حذف میگردد. سپس به کمک روش تولید بافت، تصویر آن محدوده با استفاده از محدودههای پیرامونی ساختمان بازسازی میشود. در مرحله بعد، از تصویر بازسازی شده محدوده ساختمان، رنگهای اصلی به کمک الگوریتم خوشهبندی K-means استخراج شده و سپس الگوی استتاری با تخصیص رنگ مرکز هر خوشه به همه پیکسلهای تصویری آن خوشه ایجاد میشود. الگوی استتاری بهدست آمده بر روی دو مجموعه داده متفاوت به دو صورت ارزیابی بصری و محاسبه میزان برجستگی ارزیابی شده است. موفقیت الگوی طراحی شده در ارزیابی بصری و همچنین کاهش 27 درصدی میزان برجستگی در مجموعه داده دوم، توانایی بالای روش پیشنهادی در استتار ابنیه را نشان میدهد.
- چکیده انگلیسی: Designing a suitable camouflage pattern for a building is one of the fundamental challenges in the field of passive defence. In this study, to design visible camouflage patterns, an automatic method based on high resolution satellite images processing is proposed. In the proposed method, the area around the target building on the image is first removed. Then, using the surrounding of the removed part, an artificial image is reconstructed by a texture extraction method. In the next step, the main colors of the image are extracted from reproduced image using K-means clustering algorithm, and then, the camouflage pattern is created by assigning the color of center of each cluster to all pixels of that cluster. The obtained camouflage pattern is evaluated on two different dataset in both visual assessment and computation the saliency value. Successful visual assessment and the 27 percent decrease in obtained saliency value using the second dataset indicate the high ability of the proposed method to camouflage buildings.
- انتشار مقاله: 10-11-1397
- نویسندگان: صفا خزائی,ابوالفضل کهده نارویی
- مشاهده
- جایگاه : پژوهشی
- مجله: فصلنامه علمی علوم و فناوریهای پدافند نوین
- نوع مقاله: Journal Article
- کلمات کلیدی: پوشش گیاهی,رنگدانه,استتار اپتیکی,بازتابندگی طیفی
- چکیده: امروزه با پیشرفت و گسترش چشمگیر سامانههای تصویربرداری فراطیفی استفاده از دانش طیفی مواد برای طراحی و ساخت پوششهای استتاری اجتنابناپذیر شده است. در این تحقیق به منظور طراحی پوششهای استتار اپتیکی دارای شباهت طیفی مناسب با پسزمینه مورد نظر، ضخامت بهینهی ساختار چند لایهای رنگدانههای پوشش در محدودههای مرئی و مادونقرمز بازتابی با استفاده از یک فیلتر عبوردهنده تداخلی چند لایه تعیین شده است. در فرایند انجامشده از ماتریس انتقال و الگوریتم ژنتیک استفاده شده است. به عنوان مطالعه موردی، طراحی ساختار چند لایهای پوشش استتار اپتیکی برای پسزمینههای پوشش گیاهی با استفاده از دو مادهی ژرمانیوم و سولفید روی انجام شده است. نتایج این تحقیق نشان داده است که بر اساس معیارهای شباهت طیفی مختلف و ضریب همبستگی منحنی بازتابندگی طیفی ساختار چند لایهای پیشنهادشده مشابه پوشش گیاهی مورد نظر است.
- چکیده انگلیسی: Nowadays, with the astounding progress and development of hyperspectral imaging systems, the use of spectral knowledge of materials for building camouflage coatings is inevitable. In order to design the optical camouflage coatings possessing appropriate spectral similarity with the intended background, this study determines the optimal thickness of the multi-layer pigment structure in the visible and infrared ranges using a multi-layer interference transmittance filter. In the performed process, the transmittance matrix method and the genetic algorithm have been used. As a case study, the design of a multi-layer structure of optical camouflage in vegetation backgrounds is executed using germanium and zinc sulfide. Results suggest that the multi-layer structure is similar to that of the vegetation, based on the different spectral similarity meseaures and the correlation coefficient.
- انتشار مقاله: 10-11-1397
- نویسندگان: صفا خزائی,صفا خزائی,صفا خزائی
- مشاهده
- جایگاه : پژوهشی
- مجله: فصلنامه علمی علوم و فناوریهای پدافند نوین
- نوع مقاله: Journal Article
- کلمات کلیدی:
- چکیده: انجام آزمونهای ارزیابی اقدامات متقابل در مقابل تهدیدات واقعی در حالت پرواز و با سرعت و ارتفاع واقعی به آسانی امکانپذیر نیست. منشأ تهدیدات همواره در دسترس نیستند و همچنین هزینه انجام آزمون و خطر تخریب و انهدام اهداف در آزمونهای میدانی بسیار زیاد است. بنابراین همواره طراحی و ساخت آزمونگرهای جستجوگر مادونقرمز از موضوعات قابل توجه در جهت توسعه و پیشرفت اقدامات متقابل است. یکی از اصلیترین اقدامات متقابل علیه موشکهای مادونقرمز، پرتاب فلر (اهداف کاذب) از اهداف هوایی تعقیب شونده است. در این تحقیق شبیهسازی آزمایشگاهی اقدامات فریب فلری توسط آزمونگر موجود انجام شده است و بررسی اجمالی نیز بر این نتایج صورت گرفته است. در ادامه پیشنهاد طراحی و ساخت آزمونگر تکمیلی جستجوگرهای مادونقرمز ارائه شده است. همچنین مقایسه آزمونگر موجود با آزمونگر پیشنهادی بر اساس طراحی مفهومی آنها انجام شده است. آزمونگر پیشنهادی، انجام شبیهسازی کاملتر و دقیقتر اقدامات فریب و همچنین ارزیابی عملکرد جستجوگرهای مادونقرمز در شرایط مختلف را ممکن می سازد. بررسی و تحلیل نتایج این شبیهسازیها علاوه بر ارتقای اقدامات فریب، سبب توسعه و ارتقاء در عملکرد جستجوگرهای مادونقرمز نیز است.
- چکیده انگلیسی: It is not so easy to do evaluation tests for countermeasures against real threats that are flying in a real speed and altitude. The causes of the threats are not always accesible and if we want to make a test, it will be costly. Moreover, it is very dangerous to destroy and explode a target in the field tests. Thus, countermeasures proceedings, design and manufacturing of infrared seeker testers have been considered as a serious topic. One of the main countermeasures activities against infrared missiles is usually throw a flare (false target) by aerial targets being tracked. In this paper, laboratorial simulation of flare deception countermeasures has been accompolished on current tester and design and manufacturing of a complementary tester for infrared seekers has been proposed. A comparison is also made between the current tester and the proposed tester based on their conceptual designs. The proposed tester presents a more accurate and perfect simulation for deception countermeasures and provide a performance evaluation for infrared seekers in various conditions. Study and analysis of the simulation results can not only promote deception countermeasures but also will improve the performance of infrared seekers.
- انتشار مقاله: 10-11-1397
- نویسندگان: سیاوش پادگانه,صفا خزائی,محمدرضا عاروان
- مشاهده
- جایگاه : پژوهشی
- مجله: فصلنامه علمی علوم و فناوریهای پدافند نوین
- نوع مقاله: Journal Article
- کلمات کلیدی: برآورد امکان پایش,اهداف زمینی,اطلاعات دوخطی,ماهوارههای تصویربرداری,SGP4
- چکیده: برآورد امکان پایش اهداف زمینی توسط ماهوارههای تصویربرداری همواره یکی از دغدغههای اصلی پدافند غیرعامل بوده است. در این تحقیق، با استفاده از اطلاعات دوخطی و الگوریتم مدل اغتشاشات ساده شده (SGP4) مدار ماهوارههای ارتفاع پایین در یک بازه زمانی مشخص مدلسازی شده است. توانایی SGP4 برای پایش اهداف زمینی از طریق بررسی دقت پیشبینی موقعیت ماهواره با استفاده از اطلاعات دوخطی در روزهای بعد مورد بررسی قرار گرفته است. همچنین، یک روش بر اساس هندسه دید ماهوارههای تصویربرداری اپتیکی و الگوریتم در برداری چندضلعی جهت امکان پایش اهداف زمینی در بازه زمانی مورد نظر در دو وضعیت بحرانی و عادی ارائه و در قالب یک ابزار کاربردی در محیط MATLAB پیادهسازی شده است. به منظور نمایش کارایی این ابزار، یک مطالعه موردی برای سه ماهوارهEROS B ، IKONOS و SPOT5 جهت پایش یک هدف زمینی فرضی انجام شده و نتایج حاصل با استفاده از پارامترهای فاصله، زاویه ارتفاعی و زاویه آزیموت نقطه هدف از ماهوارهها مورد بررسی قرار گرفته است.
- چکیده انگلیسی: Estimating the possibility of ground targets monitoring by imaging satellites is of the most challenging concerns in passive defense. In this research, two-line elements (TLE) data and SGP4 method which considers orbital perturbations have been used for modelling the orbits of low-altitude satellites in a specific period of time. The ability of SPG4 model for ground targets monitoring has been evaluated by using TLE data for estimating the accuracy of satellites’ position prediction in the next days. The ability of SPG4 for ground targets monitoring is appraised as well. Furthermore, a method has been proposed for estimating the possibility of ground targets monitoring based on based on the view geometry of optical imagery satellites in ordinary and critical situations and in-polygon algorithm. The proposed method has been presented as a MATLAB toolbox. For illustrating the applications of this toolbox, an investigation case study for three satellites EROS B, IKONOS, and SPOT 5 has been carried out as a case study, and then the results had been analyzed by using parameters such as range, angle of elevation and azimuth angles of target point from satellites.
- انتشار مقاله: 10-11-1397
- نویسندگان: صفا خزائی,محسن فیضی
- مشاهده
- جایگاه : پژوهشی
- مجله: فصلنامه علمی علوم و فناوریهای پدافند نوین
- نوع مقاله: Journal Article
- کلمات کلیدی: تهیه DEM,تناظریابی DEM,تصاویر ماهواره ای IRS-P5
- چکیده: تهیه و بهروزرسانی اطلاعات مکانی برای مناطق استراتژیک کشور بهویژه در مناطق مرزی یکی از چالشهای اساسی در حوزه اطلاعات دفاعی محسوب میگردد. در این خصوص، مدل رقومی ارتفاعی زمین میتواند جهت حذف هر گونه عملیات زمینی در یک فرایند مستقیم بین فضای زمین و تصاویر ماهوارهای پوششی استفاده شود. در این فرایند تنها از ضرایب چندجملهایهای کسری تصاویر ماهوارهای استفاده میشود. بااینوجود، این ضرایب به دلیل خطاهایی که در جمعآوری آنها وجود دارد، دارای یک سری خطا هستند که باید به نحوی حذف شوند. در روش پیشنهادی این تحقیق، تأثیرات خطاهای ناشی از این ضرایب برای تصاویر ماهوارهای IRS-P5 از طریق تناظریابی 2.5 بعدی بین مدل رقومی ارتفاعی حاصل از زوج تصاویر IRS-P5 و مدل رقومی ارتفاعی جهانی ASTER کاهش مییابند. نتایج عددی، حاصل از مقایسهی مدل رقومی ارتفاعی حاصل با نقاط چک زمینی نشان دادند که توسط روش پیشنهادی میتوان به دقت ارتفاعی حدود 7 متر رسید.
- چکیده انگلیسی: Generating and modifying spatial data for strategic areas of the country, especially boundary areas, is one of the key challenges in the defense technical information community. In this regard, digital elevation model (DEM) can be utilized to remove every ground operations in a direct process between the earth and overlapping satellite images. In this process, rational polynomial function (RPCs) are only used. However, these coefficients due to some errors in their gathering have some errors that must be removed in a manner. In proposed method of this study, the effects of RPC errors on IRS-P5 satellite images are reduced using the 2.5D matching procedure between IRS-P5 derived DEM and ASTER global DEM. Experimental results obtained by comparison between the resulting DEM and few available check points shows that the proposed method can achieve vertical accuracy of about 7 meter
- انتشار مقاله: 10-11-1397
- نویسندگان: امین علیزاده نایینی,صفا خزائی
- مشاهده
- جایگاه : پژوهشی
- مجله: فصلنامه علمی علوم و فناوریهای پدافند نوین
- نوع مقاله: Journal Article
- کلمات کلیدی: مشاهدات گرادیان گرانی,تعیین موقعیت سازههای مدفون,واهم آمیخت اویلر,تاسیسات زیرزمینی
- چکیده: بررسی امکان آشکارسازی سازههای زیرزمینی همواره از یکی از پیچیدهترین مسائل مورد بحث در تامین امنیت تاسیسات مدفون بوده است. در این مقاله از دادههای گرادیان جاذبی برای حل این مسئله استفاده شده است. برای تحلیل همه جانبه موضوع مورد نظر مسئله به صورت مستقیم و معکوس در نظر گرفته شده است. در مسئله مستقیم با فرض معلوم بودن ابعاد و موقعیت سازه مدفون به مدلسازی سیگنال گرادیان جاذبی پرداخته میشود و با بررسی دامنه این سیگنال و سطح نویز دستگاه گرادیومتر امکان کشف سازه زیرزمینی مورد بحث قرار میگیرد. در مسئله معکوس، با معلوم بودن سیگال گرادیان جاذبی با استفاده از روش دکانولوشن اویلر موقعیت سازه مدفون برآورد میشود. هر دو مسئله مستقیم و معکوس با انجام شبیهسازیهای متنوع مورد بررسی قرار گرفته و راهکارهای پدافندی برای کاهش احتمال کشف سازههای زیرزمینی ارائه شده است.
- چکیده انگلیسی: Investigating the possibility of detection of underground structures is one of the complicated problems. In this paper, making use of gravity gradient data is introduced as an efficient techniqueto solve this problem. In order to analyze this problem thoroughly and take into account all parts of it, both direct and inverse problems are treated in this contribution. In the direct problem, with the assumption of the known size and position of the structure, gravity gradient signal is modeled. Then, using this modeled signal and by considering the noise level of the gradiometer, some points about the detectability of the structure are discussed. In the inverse problem, position of the underground target is estimated based on the Euler deconvolution, given the gravity gradient tensor. Finally, both of the direct and inverse problems are implemented based on simulated data and some suggestions are made to decrease the probability of detectability of the underground targets.
- انتشار مقاله: 10-11-1397
- نویسندگان: محمدرضا سیف,صفا خزائی
- مشاهده
- جایگاه : پژوهشی
- مجله: فصلنامه علمی علوم و فناوریهای پدافند نوین
- نوع مقاله: Journal Article
- کلمات کلیدی: کوادروتور,پرنده های بدون سرنشین غیرخودکار,دوربین غیرمتریک,نقشه عکسی
- چکیده: فتوگرامتری هوایی با استفاده از دوربینهای متریک روش مرسوم تهیه نقشه های عکسی است. اما در بعضی از موارد استفاده از این تکنیک به دلیل برخی مسائل بویژه هزینه های بالا و ریسک های جانی عملاً دور از انتظار میباشد. یک روش جایگزین، استفاده از پرنده های بدون سرنشین و دوربین های غیرمتریک می باشد. در این تحقیق به منظور ارزیابی کارایی این روش، یک مطالعه موردی در شهرک صنعتی نکا با استفاده از یک کوادروتور غیر خودکار و دوربین غیرمتریک 10 مگا پیکسلی Sony-HX5V برای تولید نقشه های عکسی بزرگ مقیاس انجام گردید. نتایج تجربی نشان می دهد که روش مذکور دارای قابلیت تولید نقشه های عکسی با مقیاس 1:500 تا 1:100 و تولید منحنی میزان های 15 سانتی متری میبلشد. همچنین نتایج نشان می دهد این روش از لحاظ هزینه و زمان انجام پروژه نسبت به روش فتوگرامتری هوایی مرسوم در مناطق با وسعت های چند صد هکتاری کاملاً برتری دارد.
- چکیده انگلیسی: Aerial photogrammetry using metric cameras is a common method for generating an ortho-photo. But use of this technique is not occasionally possible due to some problems like high cost and human casualties. An alternative approach is using nonmetric cameras mounted on unmanned aerial vehicles. In this research, to evaluate this approach, a practical case study in the industrial complex of Neka is conducted for generating a large scale ortho-photo by using a non-automatic Quadrotor and a 10 mega-pixel sony-HX5V camera. The experimental results show that the mentioned approach has an ability to generate ortho-photos in scales from 1:500 to 1:100 as well as contours with 15 cm intervals. Moreover, the results show that this approach is superior to the conventional aerial photogrammetry in areas of several hundred acres in terms of cost and time.
- انتشار مقاله: 10-11-1397
- نویسندگان: صفا خزائی,میلاد رمضانی
- مشاهده
- جایگاه : پژوهشی
- مجله: فصلنامه علمی علوم و فناوریهای پدافند نوین
- نوع مقاله: Journal Article
- کلمات کلیدی: سنجش از دور,تخمین ارتفاع درختان,تداخل سنجی پلاریمتری راداری
- چکیده: تداخل سنجی پلاریمتری رادار با روزنه مصنوعی (PolInSAR) یک تکنیک تداخل سنجی راداری است که امکان استفاده از اطلاعات کانال های مختلف پلاریزاسیون را به منظور بررسی ساختار و لایه های عمودی پراکنشگرها فراهم می نماید. یکی از مهمترین کاربردهای این تکنیک، تخمین ارتفاع درختان است که در حوزه های جنگلداری و پدافند غیرعامل از اهمیت بالایی برخوردار است. یکی از مسائل اساسی در روشهای تداخل سنجی پلاریمتری راداری برای تخمین ارتفاع درختان، بررسی نقش و تاثیر پارامترهای محیطی از قبیل رطوبت، شیب، گونه و زبری سطح است. هدف این پژوهش، بررسی تأثیر این گونه عوامل محیطی بر روی تخمین ارتفاع درختان با استفاده از انجام آزمایشات متعدد می باشد. در این بررسی، از مدل معروف پراکنش حجمی بی نظم بر روی سطح (RVOG) به منظور تخمین ارتفاع درختان در شرایط گوناگون استفاده گردید. بر اساس نتایج به دست آمده در این تحقیق، پارامترهای زبری و رطوبت به ترتیب دارای بیشترین و کمترین تأثیر در دقت تخمین ارتفاع درختان هستند.
- چکیده انگلیسی: Polarimetric Interferometric Synthetic Aperture Radar (PolInSAR) is a Radar polarimetric technique that provides the capability to use the information of different polarization channel to investigate the structure and perpendicular layers of scatters. Estimating the height of vegetation is one of the significant applications of PolInSAR which has high importance in the forestry and passive defense fields. One of the major problems to estimate the vegetation height using PolInSAR is evaluate the impact of environmental factors such as humidity, slope, surface roughness and species. The goal of this study is investigate the impact of these factors using several experiments on simulated aerial data. The results obtained in this research present the manner and importance of each parameter.
- انتشار مقاله: 10-11-1397
- نویسندگان: صفا خزائی,شهرام شریفی هشجین
- مشاهده