در هنگام جستجو کلمه در قسمت عنوان میتوانید کلمات مورد جستجو را با کاراکتر (-) جدا کنید.
کاربرد نوع شرط:
- جایگاه : پژوهشی
- مجله: مدیریت و توسعه ورزش
- نوع مقاله: Journal Article
- کلمات کلیدی: گردشگری,رویداد ورزشی,حمایت جامعه,لیگ ملتهای والیبال,مشکلات ترافیکی
- چکیده: هدف: هدف پژوهش حاضر، بررسی آثار لیگ ملتهای والیبال بر حمایت جامعه میزبان با نقش تعدیل گر مشکلات ترافیکی بود.
روششناسی: روش تحقیق توصیفی و از نوع همبستگی بود. جامعه آماری پژوهش را تماشاگران لیگ ملتهای والیبال در سال97 تشکیل میدادند که 456 پرسشنامه مورد تجزیه و تحلیل آماری قرار گرفتند. برای سنجش آثار این رویداد و حمایت جامعه از پرسشنامه محقق ساخته، استفاده شد. پس از تائید روایی صوری و محتوایی پرسشنامهها، میزان پایایی متغیرهای پرسشنامه در یک مطالعه راهنما و با استفاده از آلفای کرونباخ بالاتر از 7/0 برآورد شدند. از نرمافزار پی ال اس برای بررسی مدل تحقیق استفاده گردید .
یافتهها:نتایج نشان داد آثار اقتصادی، درآمد روانی، سیاسی و اجتماعی- فرهنگی رویداد تاثیر مثبت، مشکلات ترافیکی منفی و مشکلات زیستمحیطی بدون تأثیر بر حمایت جامعه میزبان میباشد. همچنین مشکلات ترافیکی بهعنوان تعدیل گر فقط تأثیر منفی بر رابطه درآمد روانی رویداد بر حمایت جامعه میزبان میگذارد.
نتیجهگیری: با توجه به اینکه ایران تا هفت سال بهصورت مستمر در این رقابتها حضور خواهد داشت میتوان با کاهش آثار منفی و تأکید بر عوامل مثبت این رویداد، شرایط را برای بهرهمندی جامعه از این آثار مهیا نمود.
- چکیده انگلیسی: Objective: the present study aims at investigating the effect of national volleyball leagues on the host society’s support with the moderating role of traffic problems.
Methodology: the study was carried out based on a descriptive research of correlation type. The study’s population included the spectators of the national volleyball leagues’ games during 2019.A total of, 456 questionnaires were collected and analyzed. To assess the effect of this event on the society’s support, a self-adminisrated questionnaire was utilized. After verifying the face and content validity of the questionnaires, the reliability of its variables was estimated in a pilot study using Cronbach’s alpha method and a coefficient equal to 0.7 was attained. PLS software was employed for investigating the study’s model.
Results: the results indicated that the economic, psychic income, political and socio-cultural factors have positive impacts on the host society’s support; and, the traffic problems were found having negative effects on the host’s supports. However, no association was evidenced for bioenvironmental factors on the effects of the event on the host society’s support. Moreover, traffic problems, as moderators, have only negative effects on the relationship between psychic income of the event and the host society’s support.
Conclusion: Since Iran will participate in these competitions continuously for up to seven years, it is possible to reduce the negative effects and emphasize the positive factors of this event, to provide the conditions for the community to benefit from these effects.
- انتشار مقاله: 15-04-1399
- نویسندگان: مجتبی رجبی,مهدی طالب پور,زاهد قادری,حسن اسدی دستجردی
- مشاهده
- جایگاه : پژوهشی
- مجله: مدیریت و توسعه ورزش
- نوع مقاله: Journal Article
- کلمات کلیدی: وفاداری,هویت تیمی,لیگ برتر ایران,هواداران فوتبال
- چکیده: هدف: هدف تحقیق حاضر تحلیل سهم نسبی ابعاد هویت برندِ تیمی بر وفاداری هواداران فوتبال لیگ برتر ایران و ارائه مدلی در راستای توسعه وفاداری به تیمهای لیگ برتر فوتبال بود.
روششناسی: تحقیق حاضر از نظر هدف کاربردی و از نظر ماهیت از نوع تحقیقات توصیفی-پیمایشی بود که به صورت میدانی انجام گرفت. جامعه آماری این تحقیق را هواداران تیمهای لیگ برتر ایران تشکیل میدادند. تعداد 236 نفر به عنوان نمونه آماری به صورت تصادفی انتخاب گردیدند. ابزار گرداوری این تحقیق پرسشنامههای وفاداری رفتاری فینک و همکاران (2003)، و پرسشنامه ابعادِ هویت تیمی کو (2009) بود. روایی صوری بر اساس نظرات 15 نفر از محققین حوزه بازاریابی و ورزش انجام و بر اساس آزمون کندال روایی محتوای پرسشنامه نیز 79/0 محاسبه گردید. مقدار پایایی نیز بر اساس آلفای کرونباخ برای کل پرسشنامه 82/0 به دست آمد. جهت تحلیل دادهها از نرمافزارهای 18SPSS و AMOS20 استفاده گردید
یافتهها: جهت سنجش روایی مدل تحقیق از روش مدل یابی معادلات ساختاری استفاده گردید و بر اساس نتایج تحلیل مسیر ارتباط متغیرهای این پژوهش مورد تأیید قرار گرفته است. نتایج حاصل از تحقیق نشان داد که چهار بعدِ هویت تیمی دارای تأثیر مثبت و معناداری بر وفاداری رفتاری هواداران بودهاند.
نتیجهگیری: : نتایج حاصل از پژوهش حاضر نشان داد که چهار بعد هویت برند تیمی بر وفاداری رفتاری هواداران نسبت به تیمهای فوتبال لیگ برتر ایران تأثیرگذار میباشند. بنابراین، توسعه ادراک مدیران از شاخصهای هویت برندِ تیمی میتواند ابزاری مهم در راستای تقویت وفاداری هواداران به برند تیمهای فوتبال محسوب گردد.
- چکیده انگلیسی: Objective: The purpose of the current study was to assess the partial effects of team identity dimensions on team loyalty among fans of football pro league in Iran, and providing a model for development of loyalty to pro league football teams.
Methodology: The study was a descriptive survey done as a field one. Research population involved the fans of football teams being famous for having eager fans in football pro league. A sample of 236 fans was selected through random sampling. The research tools involved the questionnaires of Behavioral loyalty (Fink et al, 2003), and team identity (Koo, 2009). Questionnaire’s face validity was investigated according to 15 sport and marketing scholars, and questionnaire’s content validity was found to be 0.79. The questionnaire’s reliability was also found to be 0.82 according to Cronbach’s alpha. SPSS18 and AMOS20 were used for data analysis.
Results: To measure the validity and fitness of the model, structural equations modeling (SEM) has been applied, and the relationships of variables were verified based on direction analysis. According to research findings the four dimensions of team identity had positive and significant effects on behavioral loyalty.
Conclusion: The results of the current research revealed that four dimensions of team brand identity have significant and positive effect on team loyalty. So, development of managers’ perceptions about these factors can be an important tool for improving football team brand loyalty.
- انتشار مقاله: 11-09-1393
- نویسندگان: اکبر جابری,حسن اسدی دستجردی,فرزانه مظلومی سوینی,جواد خزائی پول
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: مقاومت خمشی,رآکتور تحقیقاتی تهران,محاسبهی دز,اوریجین,ام سی ان پی ایکس
- چکیده: ایمنی در هر نوع آزمایش یکی از موارد بسیار مهم است. آزمایش خمش از جمله آزمونهای مهم برای دستیابی به مشخصههای مواد است. در این مقاله، نرخ دز نمونهی استاندارد برای آزمایش خمش گرافیت در رآکتور تحقیقاتی تهران به دست آمد. با استفاده از استانداردهای مختلف مقدارهای دز در فاصلههای مختلف و دو بازهی زمانی 15 و 40 روز تابشدهی محاسبه شد. محاسبهها با استفاده از دو کد اوریجین و ام. سی. ان. پی. ایکس انجام شد. مقدارهای ناخالصی ماده با استفاده از دو تکنیک فلوئورسانی پرتو ایکس (XRF) و طیفسنجی نشر اتمی پلاسمای جفت شدهی (ICP-AES) اندازهگیری شد. نتیجههای محاسبهها نشان داد که استاندارد کلیبورن و تروبی از استانداردهای دیگر سختگیرانهتر بوده و نمونه پس از گذشت 20 روز از تابشدهی با رعایت فاصلههایی در حدود cm 100 دارای دز کمتر از 1-μSv h 2 برای انجام آزمایشها است. همچنین محاسبههای مربوط به محفظهی انتقال نشان داد که محدودیتی در انتقال نمونهها وجود ندارد. در نهایت میتوان گفت روش به کار گرفته شده در این پژوهش میتواند برای دیگر مواد موجود در قلب رآکتور نیز مورد استفاده قرار گیرد.
- چکیده انگلیسی: Safety is one of the most critical issues in any test. The flexural test is a significant one to obtain material specifications. In this paper, a standard sample dose rate was calculated for the graphite flexural test in Tehran research reactor. Using different standards, the dose was computed at different distances and two periods of radiation, 15-40 days. Our calculations were performed with the ORIGEN and MCNPX codes. The impurity amounts of the material were measured by two methods of X-ray Fluorescence (XRF) and Inductively Coupled Plasma, Atomic Emission Spectroscopy (ICP-AES). The obtained results show that the Claiborne & Trubey standard is more stringent than other standards, and it has less than 2 μSv/h dose with the observance of 100cm distance and 20 days after irradiation. Moreover, calculations of the transfer chamber indicate that there is no limitation for the transport of the samples. Finally, it can be concluded that the considered method of this research can be used also for other materials at the reactor core.
- انتشار مقاله: 17-08-1397
- نویسندگان: محمدامین امیرخانی دهکردی,مصطفی حسن زاده,محسن اسدی اسدآباد,سیدمحمد میروکیلی
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: مورفولوژی,فرایند تقطیر,اسفنج زیرکونیم,فرایند احیا
- چکیده: مورفولوژی اسفنج زیرکونیم حاصل از فرایند کرول، در مواردی مانند تأثیر آن بر ترکیب شیمیایی و میزان ناخالصیهای اسفنج و همچنین بازدهی ماندگاری اسفنج در فرایندهای میانی تولید، اهمیت پیدا میکند. در این پژوهش، از مراحل مختلف فرایند، مناطق مختلف محصول نمونهبرداری، و از میکروسکوپ الکترونی روبشی (SEM) و همچنین تکنیک پراش اشعه ایکس (XRD) برای ارزیابی محصول استفاده شد. آنالیز XRD اسفنج زیرکونیم نشان داد که پس از فرایند احیا، میزان کلرید منیزیم و منیزیم باقیمانده در بافت اسفنج افزایش مییابد و به صورت غیریکنواخت در قسمتهای مختلف اسفنج پراکنده میشود، به طوری که میزان این ناخالصیها در مرکز اسفنج بالاتر از سایر نقاط خواهد شد.
همچنین بررسیهای SEM نشان داد که در این فرایند، شکل ابتدایی ذرات اسفنج زیرکونیم در بدو تولد بیقاعده است. آنالیز شیمیایی مشخص کرد چنانچه مورفولوژی اسفنج شبه سوزنی باشد، در مرحلهی تقطیر تحت خلأ ، ناخالصیها را از خود بهتر دفع میکند. چنانچه فرایند تقطیر اسفنج زیرکونیم در مدت زمان کافی انجام نشود، میزان ناخالصیهای کلریدی و منیزیم در مرکز تودهی اسفنج بالاتر از نقاط محیطی خواهد بود. بنابراین به منظور حذف حداکثری این ناخالصیها در فرایند تقطیر، نیاز است که زمان مناسب به کار رود. هر چند فرایند تقطیر ذاتاً زمانبر و پرهزینه است، با این وجود حذف ناخالصیها نسبت به خالصسازی به روش شیمیایی، کاملاً برتری دارد.- چکیده انگلیسی: The morphology of zirconium sponge formed during the Kroll process could be more important due to its effect on composition, amount of impurities and efficiency of the sponge durability in the subsequent intermediate processes. In this research, various samples were prepared from different stages of the process and different zones of the products. In order to evaluate the products, scanning electron microscopy (SEM) and X-Ray diffraction (XRD) techniques were used. XRD analysis of the zirconium sponge showed that the amounts of magnesium chloride and retained magnesium in sponge texture were at a high level after the reduction process and were distributed non-uniformly in various parts of the sponge in which the amounts of impurities in the center was higher than the other parts. Also, examination by the scanning electron microscopy showed that the prime morphology of the zirconium sponge particles is irregular. Chemical analysis indicated that the excretion of magnesium impurities from the sponge will be more desirable in the distillation process, when the sponge morphology is in needle–like shape. If there is not enough time for the distillation process, the amount of magnesium and chloride impurities in the center of zirconium sponge will be higher in comparison to the other areas. So, for maximum elimination of such impurities in the distillation process, sufficient time duration has to be considered. Despite the fact that the distillation process is time-consuming and expensive, the impurity elimination compared to the proceses of chemical purifying is more favourable
- انتشار مقاله: 05-05-1394
- نویسندگان: محسن اسدی اسدآباد,مهدی ذوالفقاری عطاآبادی,سیدامیر حسین امامی
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: هدایت الکتریکی خاک,پلاریزاسیون پتانسیودینامیک,خوردگی مخزن پسمان,مشخصات فیزیکی- شیمیایی,اتلاف وزن
- چکیده: در این مقاله، خوردگی بشکههای دفن پسمانهای با پرتوزایی کم از جنس فولاد AISI st37 با تحلیل ویژگیهای فیزیکی- شیمیایی محیط خاکی بررسی شده است. ترکیب شیمیایی خاک آثار خوردگی مهمی بر بشکههای فولادی دارد. عوامل اصلی که خوردگی خارجی بشکههای دفن پسمان را تحت تأثیر قرار میدهند، عبارتند از: رطوبت خاک، مقاومت الکتریکی خاک، نمکهای محلول، کلریدها، قدرت اسیدی، پتانسیل اکسایش- کاهش و مقدار آنیونها و کاتیونها. در این پژوهش، میزان خورندگی خاک در مناطق کویر مرکزی ایران با استفاده از استاندارد AWWA C105 مطالعه شد. در این مناطق، چهار نمونه خاک از نقاط پیرامون محلهای دفن پسمان جمعآوری و به صورت CR3, CR2, CR1 و 4CR نامگذاری شدند. در ابتدا به منظور ارزیابی بهتر خورندگی خاکها، آنالیزهای فیزیکی و شیمیایی روی خاکها و محلولهای آماده شده با خاکها انجام گرفت. سپس، نرخ خوردگی بشکههای فولادی با آزمایشهای کاهش وزنی و پلاریزاسیون پتانسیودینامیک اندازهگیری شد. نتایج به دست آمده نشان میدهد که در تمام روشها، نمونهی خاک 4CR، با کمترین هدایت الکتریکی نسبت به خاکهای دیگر، دارای نرخ خوردگی پایینتر است. سرعت خوردگی نمونهها در این منطقه در روش کاهش وزنی 180- روزه و در روش الکتروشیمیایی به ترتیب برابر با 0.0625 و
mm/y 0.029 است.- چکیده انگلیسی: In this study, corrosion of AISI st37 steel waste casks was investigated by analyzing the physico-chemical characteristics of the soil medium. The chemical composition of soil has important effects on steel casks. Moisture, soil electrical resistivity, soluble salts, chlorides, pH, redox potential and anions and cations content, as the major parameters, influence the exterior corrosion of waste casks. To carry out this research, the corrosivity of the soil in the central desert regions of Iran has been studied using the AWWA C105 standard. In these regions, 4 samples have been collected at varied points located in the vicinity of the site, named CR1, CR2, CR3 and CR4. At first, for a better assessment of the soils corrosivity, the physical and chemical analyses were conducted on the soil and in the solutions prepared from the soil samples. Then, the rate of corrosion was measured by the weight loss and potentiodynamic polarization methods. The obtained results showed that the CR4 soil sample with the lowest electrical conductivity, compared with the other samples, has the lower corrosion rate in the whole method. Corrosion rates of the samples in this region in the 180-day weight loss method, and in the electrochemical method are equal to 0.0625 and 0.029 mm/y, respectively.
- انتشار مقاله: 07-07-1394
- نویسندگان: حمزه فراتی راد,حمید رضا مهاجرانی,مهدی نجات پیشکناری,علی مالکی فارسانی,سعید مومن زاده,محمد رستم نژاد,محسن اسدیان
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: جوش مقاومتی نقطهای,ریزساختار,آلیاژ زیرکنیمی,Nb%1-Zr
- چکیده: تأثیر پارامترهای فرایندی شامل جریان جوش و نیروی الکترود بر ریزساختار جوش مقاومتی نقطهای ورق آلیاژ Nb%1-Zr به ضخامت 3/0 میلیمتر مورد بررسی قرار گرفت. در بررسی ریزسختی مقطع دکمهی جوش در راستای قطر دکمهی جوش، اندازهگیری سختی برحسب ویکرز بر روی فلز پایه، منطقهی حرارت دیده و دکمهی جوش برای نمونههایی که با پارامترهای مختلف جوشکاری شده بودند، انجام شد. بررسیهای ریزساختاری نشان داد که افزایش جریان سبب درشتتر شدن دانهها میشود. از جملهی مشاهدههای مهم در این مطالعه بزرگ شدن اندازهی دانه در اثر افزایش نیروی الکترود در زمان جوشکاری یکسان بود. در تصویرهای وابسته به فلزنگاری مشاهده شد که در اثر اعمال نیروی الکترود بیشتر، دانهها به صورت طولی در راستای جریان حرارت تغییر شکل میدهند. اندازهگیری سختی منطقههای جوش و فلز پایه نیز نشان داد که دکمهی جوش بیشترین میزان سختی را دارد و این میزان در منطقهی حرارت دیده و فلز پایه به ترتیب، کاهش مییابد. این تفاوت به دلیل تغییرهای فازی β و α+β است. تغییر حالت از فاز β به α به وسیلهی فرایند نفوذ تودهای و تشکیل ساختار ویدمناشتاتن α، که بر اثر آهسته سرد شدن به وجود خواهد آمد، انجام میپذیرد. ساختار موردنظر سختتر و دارای استحکام بیشتری از ریزساختار α هم محور فلز پایه است.
- چکیده انگلیسی: In this study, the effects of process parameters including weld current and electrode force on the microstructure of resistance spot welding on Zr-1%Nb alloy sheets of 0.3mm thickness were investigated. In the microhardness investigation of the weld nugget cross section, the Vickers hardness measurement was performed in the direction of the weld nugget diameter on a base metal, HAZ, and weld nugget for the welded specimens with different parameters. Applying more electrode force in the same welding time yielded the grain growth which was found to be an important observation in this study. In the metallographic images, it was observed that the grains were deformed to be longer in the heat flow direction when more electrode force was applied. The hardness measurement of the weld zones and base metal showed that, the weld nugget had a maximum amount of hardness where it decreased in HAZ and subsequently in the base metal. This difference is due to transformation of the α+β and β phases. Transformation from β to α phase, which was carried out by a massive diffusion process and formation of the Widmanstatten α structure was achieved by slow cooling. The mentioned structure was found to be harder and stronger than the equiaxed α microstructure of the weld metal.
- انتشار مقاله: 19-05-1395
- نویسندگان: حمیدرضا ادیب زاده,محسن اسدی اسدآباد,علیرضا اعلایی
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی: آلیاژسازی مکانیکی,ترکیب بینفلزی Sn3Nb,آمایش گرمایی,مواد نانوساختاری
- چکیده: ترکیب ابررسانی Sn3Nb به صورت گسترده در تولید میدانهای مغناطیسی بالای 10 تسلا مورد استفاده قرار میگیرد، اما این ترکیب بینفلزی از طریق واکنش گرمایی در دماهای بالای ◦C2000 به دست میآید. بنابراین در سالهای اخیر پژوهشگران به بررسی فرایندهایی پرداخته-اند که منجر به شکلگیری فازهای ابررسانای Sn3Nb در دماهای پایینتر از ◦C1000 میشود. هدف این پژوهش تهیهی ترکیب نانوبلوری بینفلزی Sn3Nb از طریق آلیاژسازی مکانیکی و آمایش گرمایی متعاقب در دماهای پایین بود. بررسی تغییرهای فازی پودر آسیاب شده، قبل و بعد از آمایش گرمایی به وسیلهی پراشسنجی پرتو ایکس (XRD) انجام شد. تجزیههای ریزساختاری با استفاده از میکروسکوپ الکترون روبشی (SEM) و میکروسکوپ الکترون عبوری (TEM) به انجام رسید. اندازهی دانه و کرنش شبکه با استفاده از روش ویلیامسون- هال محاسبه شد. در طول فرایند، آسیابکاری پودرهای نیوبیم- قلع به شکلگیری یک محلول جامد منجر شد، در حالیکه آمایش گرمایی باعث شکلگیری فاز Sn3Nb شد. نتایج نشان داد که قلههای پراش پرتو ایکس مربوط به ترکیب Sn3Nb پس از آمایش گرمایی پودر آسیاب شده، به مدت 10 ساعت در دمای ◦C600، ظاهر شد.
- چکیده انگلیسی: Nb3Sn superconductor compound is the most widely used material for generating magnetic fields above 10T. But, this intermetallic compound is obtained by thermal reactions at high temperatures (>2000°C). Therefore, in recent years the researchers have investigated the processes that permit the formation of the Nb3Sn superconducting phases at lower temperatures (<1000°C). The aim of this study was preparation of nanocrystalline Nb3Sn intermetallic compound using mechanical alloying and heat treatment at low temperature. The phase transitions of milled powder before and after the heat treatment were characterized using X-ray diffractometry (XRD). The microstructural analyses were performed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The grain size and lattice strain were calculated using the Williamson-hall method. During the milling, mechanical alloying of Nb-Sn elemental powders resulted in the formation of a solid solution, while the heat-treatment led to the formation of Nb3Sn phase. The results showed that Nb3Sn XRD peaks appeared after the heat treatment at 600°C for the powder milled for 10h.
- انتشار مقاله: 17-05-1395
- نویسندگان: مریم طغیانی مورنانی,احمد نوزاد,محسن اسدی اسدآباد
- مشاهده
- جایگاه : پژوهشی
- مجله: علوم و فنون هستهای
- نوع مقاله: Journal Article
- کلمات کلیدی:
- چکیده: سلنیم یکی از عناصر کم مقدار(trace) است.
- چکیده انگلیسی:
- انتشار مقاله: 04-06-1398
- نویسندگان: محسن اسدی نژاد,علی پذیرنده,پروانه وثوق
- مشاهده
- جایگاه : پژوهشی
- مجله: فیزیک کاربردی ایران
- نوع مقاله: Journal Article
- کلمات کلیدی: شبیهسازی,کاربید بور,جذب نوترون,حفاظ هستهای,حفاظت هستهای
- چکیده: استفاده از کامپوزیتهای زمینۀ فلزی میتواند ترکیبی از خواص مطلوب زمینۀ فلزی و همچنین خواص ویژۀ فیزیکی ذرّات جاذب نوترون مانند کاربید بور را فراهم سازد که به تنهایی ممکن است شکننده و تُرد باشند. در این پژوهش مطالعهای روی توان تضعیف نوترونِ حفاظهای کامپوزیتی از نوع میکروکامپوزیت آلومینیوم/کاربید بور با درصدهای 5، 10و 20 درصد وزنی کاربید بور انجام شده است. جهت بررسی خواص جذب نوترونِ نمونههای مورد مطالعه از روش شبیهسازی کُد مونت کارلوی MCNP و چشمۀ نوترونی کانال خشک رآکتور MNSR با شار n.cm-2.s-1 105 ×13/2 در توان نامی 30 کیلووات استفاده شده است. نتایج شبیهسازی نشان میدهد که شار نوترون در حضور نمونههای 5، 10 و 20% کاربید بور به ترتیب n.cm-2.s-1 105 ×32/1 ، 105 ×12/1 و 105 ×07/1 پیش بینی میشود و با این افزایش درصد فاز تقویت کنندۀ کاربید بور، شار نوترون تا 50% کاهش مییابد.
- چکیده انگلیسی: The use of metal matrix composites can provide a combination of desirable properties of metals as well as the special physical properties of neutron absorber reinforcing particles such as boron carbide, which alone may be brittle. Therefore, in the present study on neutron attenuation power of composite shielding, several Al-B4C composite samples with weight fractions of 5, 10 and 20% B4C have been used. In order to investigate the neutron absorption properties of the studied samples, the MCNP Monte Carlo code and the neutron source of the dry channel of the MNSR reactor with a flux of 2.13E+5 n.cm-2.s-1 have been used ,which provided in nominal reactor power of 30 kW. The results show that the neutron flux in the presence of 5, 10 and 20% boron carbide samples is predicted to be 1.32E+05 n.cm-2.s-1,1.12E+05 n.cm-2.s-1 and 1.07E+05 n.cm-2.s-1, respectively. With this increase in the percentage of reinforcement phase, neutron flux is reduced down to 50%.
- انتشار مقاله: 21-02-1400
- نویسندگان: زهرا صفایی,محسن اسدی اسدآباد,رضا امینی نجف آبادی,جواد مختاری
- مشاهده
- جایگاه : پژوهشی
- مجله: فیزیک کاربردی ایران
- نوع مقاله: Journal Article
- کلمات کلیدی: کد SRIM,برنامه AMTRACK,اتمهای پسزدۀ اولیه,VVER-1000,فولاد زنگنزن سری316
- چکیده: یکی از آثار تابشهای هستهای در مواد، جابهجایی اتمها از جایگاه خود در شبکۀ بلوری است. برای محاسبۀ آسیب تابش نوترون باید طیف انرژی اتمهای پسزدۀ اولیه و همچنین توزیع زاویهای و مکانی آنها را محاسبه کرد. برنامۀ AMTRACK به منظور محاسبۀ این اطلاعات توسعه یافته است. این برنامه با استفاده از خروجی Ptrac کد MCNPX و تحلیل آن، اطلاعات مربوط به اتمهای پسزده را به دست میآورد. در این مطالعه، فولاد زنگنزن 316 که یکی از مهمترین آلیاژها در ساخت محفظۀ فشار راکتور است، بررسی شده است. نوترونهای تک انرژی keV 1 تاMeV 10 روی این فلز تابش داده شدهاند و کسر PKAهای تولیدی، انرژی میانگین آنها، بیشینۀ انرژی PKAها و میزان آسیب تابشی به دست آمده است. محاسبات با استفاده از طیف نوترون راکتور بوشهر انجام شده است. با استفاده از این روش مقدار آسیب در راکتور بوشهر (برای فولاد زنگنزن 316) برابر است با (dpa/fluence) 22-10× 2/7.
- چکیده انگلیسی: The displacement of the atoms from their lattice sites is one of the results of neutron irradiation on materials. The primary knocked-on atoms spectrum and their angular distribution should be calculated for consideration of neutron radiation damage calculation. The AMTRACK program has been developed to calculate this information. This program extracts and analyzes information about the primary knocked-on atoms by using Ptrac output of the MCNPX code. In this study, Stainless Steel 316, one of the most important alloys in the reactor pressure vessel, is investigated. The material is irradiated by single energy neutrons of 1keV to 10MeV, the fraction of produced PKAs, their average energy, their maximum energy, and radiation damage value are calculated. The calculations are performed by using the neutron spectrum of the Bushehr reactor. Using this method, the amount of damage in the Bushehr reactor pressure vessel (for Stainless Steel 316) is equal to 7.2×10-22 (dpa/ fluence).
- انتشار مقاله: 24-11-1398
- نویسندگان: علی محمدی,محسن اسدی اسدآباد,سعید حمیدی,محمد امین امیرخانی دهکردی
- مشاهده